3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS62122DRVR
Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)
TPS62122DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch output pin connected to internal MOSFET switches; connect external inductor to this pin for DC-DC converter current control. |
| 2 | VOUT | input | Output voltage sense and feedback pin; must be connected to output capacitor for voltage regulation. |
| 3 | FB | input | Feedback input pin for external voltage-divider network; sets and regulates output voltage. |
| 4 | EN | input | Enable control input pin; high level activates device, low level shuts down; must be terminated. |
| 5 | VIN | power_in | Input power supply pin; supports 2 V to 15 V input voltage range for device operation. |
| 6 | GND | power_in | Ground power supply return pin; provides the power supply ground reference. |
| 7 | Exposed Thermal Pad | passive | Exposed thermal pad for dissipation of internal MOSFET switching losses; must be soldered to PCB and connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2 | 15 | V | Device operating | 5 | |
| Quiescent current | IQ | 11 | 18 | µA | IOUT = 0 mA, device not switching, EN = VIN, regulator sleeps | 5 | |
| Active mode current consumption | IActive | 240 | 275 | µA | VIN = 5.5 V = VOUT, TJ = 25°C, high-side MOSFET switch fully turned on | 5 | |
| Shutdown current | ISD | 0.3 | 1.2 | µA | EN = GND, VOUT = SW = 0 V, VIN = 3.6 V | 5 | |
| Undervoltage lockout threshold, falling VIN | VUVLO | 1.85 | 1.95 | V | Falling VIN | 5 | |
| Undervoltage lockout threshold, rising VIN | VUVLO | 2.5 | 2.61 | V | Rising VIN | 5 | |
| Threshold for detecting high EN | VIH TH | 0.8 | 1.1 | V | 2 V ≤ VIN ≤ 15 V, rising edge | 5 | |
| Threshold for detecting low EN hysteresis | VIL TH HYS | 0.4 | 0.6 | V | 2 V ≤ VIN ≤ 15 V, falling edge | 5 | |
| Input bias current, EN | IIN | 0 | 50 | nA | EN = GND or VIN | 5 | |
| High-side MOSFET ON-resistance (VIN = 3.6 V) | RDS(ON) | 2.3 | 3.4 | Ω | VIN = 3.6 V | 5 | |
| High-side MOSFET ON-resistance (VIN = 8 V) | RDS(ON) | 1.75 | 2.5 | Ω | VIN = 8 V | 5 | |
| Low-side MOSFET ON-resistance (VIN = 3.6 V) | RDS(ON) | 1.3 | 2.5 | Ω | VIN = 3.6 V | 5 | |
| Low-side MOSFET ON-resistance (VIN = 8 V) | RDS(ON) | 1.2 | 1.75 | Ω | VIN = 8 V | 5 | |
| Forward current limit MOSFET high-side | ILIMF | 200 | 250 | 400 | mA | VIN = 8 V, open loop | 5 |
| Feedback FB voltage comparator threshold | -2.5 | 0 | 2.5 | % | Referred to 0.8-V internal reference | 5 | |
| Input bias current FB | IIN | 0 | 50 | nA | VFB = 0.8 V | 5 | |
| Regulator start-up time | tStart | 50 | 150 | µs | Time from active EN to device starts switching, VIN = 2.6 V | 6 | |
| Output voltage ramp time | tRamp | 120 | 300 | µs | Time to ramp up VOUT = 1.8 V, no load | 6 | |
| Leakage current into SW pin | ILK_SW | 1 | 1.5 | µA | VOUT = VIN = VSW = 1.8 V, EN = GND, device in shutdown mode | 6 | |
| Leakage into VOUT pin | ILKG | 0 | 50 | nA | V(OUT) = 1.8 V | 6 | |
| Voltage at VIN | -0.3 | 17 | V | 4 | |||
| Voltage at SW dynamically during switching | 17 | V | t < 10 µs | 4 | |||
| Voltage at SW pin static DC | -0.3 | 6 | V | Static DC | 4 | ||
| Voltage at EN pin | VI | -0.3 | V | VIN +0.3, but ≤17 | 4 | ||
| Voltage on FB pin | -0.3 | 3.6 | V | 4 | |||
| Voltage at PG, VOUT, SGND (row shared; VOUT applies to TPS62122) | -0.3 | 6 | V | 4 | |||
| Maximum operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model | V(ESD) | -2000 | 2000 | V | HBM per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Electrostatic discharge, charged device model | V(ESD) | -1000 | 1000 | V | CDM per JEDEC JESD22-C101 | 4 | |
| Supply voltage VIN | VIN | 2 | 15 | V | Device in operation | 4 | |
| Output current capability | 25 | mA | VIN = 2 V, VOUT = 1.8 V, DCRL = 0.7 Ω | 4 | |||
| Output current capability | 75 | mA | VIN ≥ 2.5 V, VOUT = 1.8 V, DCRL = 0.7 Ω | 4 | |||
| Effective inductance | 10 | 22 | 33 | µH | 4 | ||
| Effective output capacitance | 1 | 2 | 33 | µF | 4 | ||
| Output voltage | 1.2 | 5.5 | V | 4 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | Unless otherwise noted | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DRV package) | RθJA | 114.4 | °C/W | DRV [DFN] 6-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (DRV package) | RθJC(top) | 73.7 | °C/W | DRV [DFN] 6-pin package | 5 | ||
| Junction-to-board thermal resistance (DRV package) | RθJB | 201.9 | °C/W | DRV [DFN] 6-pin package | 5 | ||
| Junction-to-top characterization parameter (DRV package) | ψJT | 0.8 | °C/W | DRV [DFN] 6-pin package | 5 | ||
| Junction-to-board characterization parameter (DRV package) | ψJB | 94.9 | °C/W | DRV [DFN] 6-pin package | 5 | ||
| Junction-to-case (bottom) thermal resistance (DRV package) | RθJC(bot) | 122.7 | °C/W | DRV [DFN] 6-pin package | 5 |
CAD (KiCad official)
- Symbol:
TPS62122DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62122drvr-etched.step/tps62122drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62122drvr.step/tps62122drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
5132bdb3da13d287, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).