3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL4275
Slkor SLKORMICRO Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252-5
SL4275 from Slkor SLKORMICRO Elec, in a TO-252-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | power_in | Regulator input supply. Operating range 5.5V to 55V (absolute max 60V). Bypass with a ceramic capacitor placed close to the IC pin to ground. |
| 2 | RQ | input | Open-drain reset output. Pulled low when VQ falls below the reset threshold VRT (typ 4.65V). Requires an external pull-up resistor (Rext >= 5kΩ); VOL <= 0.4V. Absolute max 36V. May be left floating if unused. |
| 3 | GND | power_in | Ground reference. Internally connected to the exposed heat-sink tab (die pad). |
| 4 | D | input | Reset delay timing pin. Connect a capacitor to GND to set the reset delay (trd = CD * 1.8V / 6uA; e.g. 47nF ≈ 15ms). Charge current ≈ 6uA typ, upper trip VDT ≈ 1.8V. Absolute max 12V. May be left floating (default delay ~8us). |
| 5 | Q | power_out | Regulated 5.0V output (±2%, 4.9V-5.1V). Supplies up to 450mA (current limit typ 800mA). Requires an output capacitor CQ >= 22uF with ESR <= 5Ω @ 10kHz for loop stability. Absolute max 12V. |
| 6 | GND | power_in | Package tab (pad 6). printed: the tab is labelled GND (图3-1); pin 3 GND 内部连接到散热片. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | TO-252-5 |
| Category | PMIC |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VI | -0.3 | 60 | V | Voltages relative to GND | 3 | |
| Output voltage | VQ | -0.3 | 12 | V | Voltages relative to GND | 3 | |
| Reset output voltage | RQ | -0.3 | 36 | V | Voltages relative to GND | 3 | |
| Reset delay voltage | D | -0.3 | 12 | V | Voltages relative to GND | 3 | |
| Junction temperature | Tj | -40 | 150 | ℃ | 3 | ||
| Storage temperature | Tstg | -40 | 150 | ℃ | 3 | ||
| ESD human body model | VESD-HBM | -2000 | 2000 | V | JESD22-A114 human body model | 3 | |
| ESD charged device model | VESD-CDM | -1000 | 1000 | V | JESD22-C101E charged device model | 3 | |
| Operating voltage | VI | 5.5 | 13.5 | 55 | V | 5 | |
| Output voltage | VQ | 4.9 | 5 | 5.1 | V | IQ<450m;VI<55V | 5 |
| Output current limit | IQ | 450 | 800 | mA | VI=13.5V | 5 | |
| Quiescent current | Iq1 | 80 | 100 | uA | IQ = 5mA | 5 | |
| Quiescent current | Iq2 | 130 | 160 | uA | IQ = 400mA | 5 | |
| Dropout voltage | Vdr | 0.3 | 0.5 | V | IQ = 300mA | 5 | |
| Load regulation | ΔVQLo | 33 | 50 | mV | 5mA<IQ<450mA | 5 | |
| Line regulation | ΔVQLi | 2 | 10 | mV | 8V<VI<55V,IQ=5mA | 5 | |
| Reset threshold | VRT | 4.5 | 4.65 | 4.8 | V | Output voltage falling | 5 |
| Reset delay lower trigger threshold | VDL | 0.2 | 0.4 | 0.6 | V | 5 | |
| Reset delay charging current | ICharge | 3 | 6 | 9 | uA | VD=0V | 5 |
| Reset delay time | trd | 10 | 15 | 20 | ms | CD=47nF | 5 |
| Reset output leakage current | IRQ | 0 | 1 | uA | VRQ=5V | 5 | |
| Reset output low voltage | VRQL | 0.4 | V | Rext≥5KΩ ; VQ<VRT | 5 | ||
| Output capacitance | CQ | 1 | uF | ESR≤5Ω@10KHZ | 5 | ||
| Output capacitance (recommended) | CQ | 22 | uF | ESR≤5Ω at 10kHz, over operating temperature range | 1 | ||
| Power supply rejection ratio | PSRR | 70 | dB | [email protected] | 5 | ||
| Reset hysteresis | Vhys | 0.2 | V | 5 | |||
| Reset response time | trr | 2 | us | 5 | |||
| Reset delay upper trigger threshold | VDT | 1.8 | V | 5 | |||
| Reset delay time without capacitor | trd | 8 | us | Pin without capacitor | 5 | ||
| Junction-to-case thermal resistance | RthJC | 3.6 | K/W | Measured at heat-sink base | 4 | ||
| Junction-to-ambient thermal resistance | RthJA | 27 | K/W | 4 | |||
| Junction-to-ambient thermal resistance | RthJA | 115 | K/W | Pins only | 4 | ||
| Junction-to-ambient thermal resistance | RthJA | 52 | K/W | 300 mm2 heat sink | 4 | ||
| Junction-to-ambient thermal resistance | RthJA | 42 | K/W | 600 mm2 heat sink | 4 |
CAD (KiCad official)
- Symbol:
SL4275 - Footprint:
Package_TO_SOT_SMD:TO-252-5_TabPin6 - 3D model: TO-252-5 (KiCad packages3D, STEP)
- 3D model files:
sl4275-etched.step/sl4275-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl4275.step/sl4275.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (10 pp, sha256
6adfe1024a6646d0, retrieved 2026-11-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).