Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

SP3075EEN-L

MaxLinear · RS-485 / RS-422 ICs · SOIC-8

SP3075EEN-L from MaxLinear, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver Output. CMOS-level receiver output; drives high (VOH ≥ VCC−0.6V) when A−B > −50mV and low (VOL ≤ 0.4V) when A−B < −200mV. High-impedance (tri-stated) when /RE is high.
2 /RE input Receiver Enable, active-low. Drive low to enable the receiver output RO; drive high to tri-state RO. With /RE high and DE low the device enters low-power shutdown (ISHDN ≈ 0.05µA). Includes hot-swap glitch protection.
3 DE input Driver Enable, active-high. Drive high to enable the differential driver so DI is transmitted to bus pins A and B; drive low to tri-state the driver outputs. Includes hot-swap glitch protection.
4 DI input Driver Input. CMOS-level transmit data input. When DE is high, a logic high on DI drives A high and B low; a logic low on DI drives A low and B high. VIH ≥ 2V, VIL ≤ 0.8V.
5 GND power_in Ground reference (0V) for supply and logic.
6 A bidirectional Non-inverting RS-485/RS-422 bus pin. Driver output when DE is high and receiver input when /RE is low. Handles common-mode range −7V to +12V; ±15kV HBM / ±15kV Air-Gap / ±8kV Contact ESD protected. Receiver input resistance ≥96kΩ.
7 B bidirectional Inverting RS-485/RS-422 bus pin. Driver output when DE is high and receiver input when /RE is low. Handles common-mode range −7V to +12V; ±15kV HBM / ±15kV Air-Gap / ±8kV Contact ESD protected.
8 VCC power_in Positive supply, +3.3V ±0.3V (absolute max +6.0V). Typical supply current 0.8mA (1.5mA max); shutdown current 0.05µA typ (with /RE=VCC and DE=GND).

Key specifications

Parameter Value
Manufacturer MaxLinear
Package SOIC-8
Category Interface
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SP3075EEN-L
  • SP3075EEN-LEY-L
  • SP3075EEN-LEY

CAD (KiCad official)

  • Symbol: SP3075EEN-L
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (20 pp, sha256 860dab706abedb6e, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF