3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownINA197AQDBVRQ1
Texas Instruments · Current-Sensing Amplifiers · SOT-23-5
INA197AQDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage. |
| 2 | GND | power_in | Ground. |
| 3 | V+ | power_in | Power supply, 2.7 to 18 V. |
| 4 | VIN+ | power_in | Connect to supply side of shunt resistor; common-mode range is -16 V to 80 V. |
| 5 | VIN- | power_in | Connect to load side of shunt resistor; common-mode range is -16 V to 80 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain error | -1 | 0.2 | 1 | % | VSENSE = 20 mV to 100 mV, 25°C; typ ±0.2% | 5 | |
| Gain error, full range | -2 | 2 | % | VSENSE = 20 mV to 100 mV, full range | 5 | ||
| Total output error | -2.2 | 0.75 | 2.2 | % | 25°C; typ ±0.75% | 5 | |
| Total output error, full range | -3 | 1 | 3 | % | Full range; typ ±1% | 5 | |
| Nonlinearity error | -0.1 | 0.002 | 0.1 | % | VSENSE = 20 mV to 100 mV, 25°C; typ ±0.002% | 5 | |
| Common-mode input voltage | VCM | -16 | 80 | V | Full range | 5 | |
| Common-mode rejection | CMR | 80 | 94 | dB | VIN+ = −16 V to 80 V, 25°C | 5 | |
| Common-mode rejection | CMR | 100 | 120 | dB | VIN+ = 12 V to 80 V, full range | 5 | |
| Offset voltage, RTI | VOS | 0.5 | 2 | mV | 25°C; typ ±0.5 | 5 | |
| Offset voltage, RTI, full range | VOS | 0.5 | 3 | mV | Full range | 5 | |
| Offset voltage vs power supply | PSR | 5 | 100 | μV/V | VS = 2.7 V to 18 V, VIN+ = 18 V, full range | 5 | |
| Input bias current | IB | -23 | 8 | 23 | μA | VIN- pin, full range; typ ±8 | 5 |
| Output voltage (VSENSE < 20 mV) | VOUT | 300 | mV | All devices, −16 V ≤ VCM < 0 and VS < VCM ≤ 80 V, 25°C | 5 | ||
| Output voltage (VSENSE < 20 mV), INA197A | VOUT | 1 | V | 0 V ≤ VCM ≤ VS, VS = 5 V, 25°C | 5 | ||
| Swing to GND | 3 | 50 | mV | RL = 100 kΩ to GND, full range; printed VGND + 3 / VGND + 50 mV | 5 | ||
| Operating voltage | VS | 2.7 | 18 | V | Full range | 6 | |
| Quiescent current | IQ | 700 | 1250 | μA | VOUT = 2 V, full range | 6 | |
| Quiescent current | IQ | 370 | 950 | μA | VSENSE = 0 mV, full range | 6 | |
| Operating temperature | -40 | 125 | °C | 6 | |||
| Storage temperature | -65 | 150 | °C | 6 | |||
| Supply voltage | 18 | V | 4 | ||||
| Differential input voltage range (VIN+, VIN-) | -18 | 18 | V | analog inputs | 4 | ||
| Common-mode voltage range | -16 | 80 | V | 4 | |||
| Input current into any pin | 5 | mA | 4 | ||||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature, Tstg | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Common-mode input voltage | VCM | 12 | V | 4 | |||
| Operating supply voltage | V+ | 12 | V | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 221.7 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 144.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 49.7 | °C/W | 4 | |||
| Gain | G | 50 | V/V | INA197A, 25°C | 5 | ||
| Output impedance | RO | 1.5 | Ω | 25°C | 5 | ||
| Maximum capacitive load | 10 | nF | No sustained oscillation, 25°C | 5 | |||
| Offset voltage vs temperature | dVOS/dT | 2.5 | μV/°C | Full range | 5 | ||
| Bandwidth | BW | 300 | kHz | INA197A, CLOAD = 5 pF, 25°C | 6 | ||
| Phase margin | 40 | ° | CLOAD < 10 nF, 25°C | 6 | |||
| Slew rate | SR | 1 | V/μs | 6 | |||
| Settling time (1%) | ts | 2 | μs | VSENSE = 10 mV to 100 mVPP, CLOAD = 5 pF, 25°C | 6 | ||
| Voltage noise density | 40 | nV/√Hz | 25°C | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
INA197AQDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina197aqdbvrq1-etched.step/ina197aqdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina197aqdbvrq1.step/ina197aqdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
f59d643a5d0c3b16, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).