component
SiLM5740FCG-DG
Public Made by Adomby adom
Sillumin Digital Isolators, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSiLM5740FCG-DG
Sillumin · Digital Isolators · SOP-16-300mil
SiLM5740FCG-DG from Sillumin, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Input-side power supply, specified at 2.25 V to 5.5 V, with a 0.1 µF bypass capacitor recommended as close to the pin as possible. |
| 2 | GND1 | power_in | Input-side power ground; all voltage parameters are referenced to the local ground, GND1 or GND2. |
| 3 | INA | input | Channel A logic input on the input side; input thresholds are 0.6 to 0.7 VCCI (rising) and 0.3 to 0.4 VCCI (falling), and an open input drives OUTA to the default level (high for SiLM574x, low for SiLM574xF). |
| 4 | INB | input | Channel B logic input on the input side; input thresholds are 0.6 to 0.7 VCCI (rising) and 0.3 to 0.4 VCCI (falling), and an open input drives OUTB to the default level (high for SiLM574x, low for SiLM574xF). |
| 5 | INC | input | Channel C logic input on the input side; input thresholds are 0.6 to 0.7 VCCI (rising) and 0.3 to 0.4 VCCI (falling), and an open input drives OUTC to the default level (high for SiLM574x, low for SiLM574xF). |
| 6 | IND | input | Channel D logic input on the input side; input thresholds are 0.6 to 0.7 VCCI (rising) and 0.3 to 0.4 VCCI (falling), and an open input drives OUTD to the default level (high for SiLM574x, low for SiLM574xF). |
| 7 | NC | unconnected | No connection. |
| 8 | GND1 | power_in | Input-side power ground; all voltage parameters are referenced to the local ground, GND1 or GND2. |
| 9 | GND2 | power_in | Output-side power ground; all voltage parameters are referenced to the local ground, GND1 or GND2. |
| 10 | EN2 | input | Output enable 2 for the output side; a low value causes the outputs to be high-impedance. |
| 11 | OUTD | output | Channel D output on the output side; it takes the default level (high for SiLM574x, low for SiLM574xF) when input power is lost or IND is open. |
| 12 | OUTC | output | Channel C output on the output side; it takes the default level (high for SiLM574x, low for SiLM574xF) when input power is lost or INC is open. |
| 13 | OUTB | output | Channel B output on the output side; it takes the default level (high for SiLM574x, low for SiLM574xF) when input power is lost or INB is open. |
| 14 | OUTA | output | Channel A output on the output side; it takes the default level (high for SiLM574x, low for SiLM574xF) when input power is lost or INA is open. |
| 15 | GND2 | power_in | Output-side power ground; all voltage parameters are referenced to the local ground, GND1 or GND2. |
| 16 | VCC2 | power_in | Output-side power supply, specified at 2.25 V to 5.5 V, with a 0.1 µF bypass capacitor recommended as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sillumin |
| Package | SOP-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VCC1 and VCC2 (absolute maximum) | VCC1, VCC2 | -0.3 | 6 | V | 8 | ||
| Output current | IO | -15 | 15 | mA | 8 | ||
| Junction temperature | TJ | -55 | 150 | °C | 8 | ||
| Storage temperature | TS | -65 | 150 | °C | 8 | ||
| HBM ESD rating | VESD | 8000 | V | HBM | 8 | ||
| CDM ESD rating | VESD | 2000 | V | CDM | 8 | ||
| Supply voltage, VCC1 and VCC2 (recommended) | VCC1, VCC2 | 2.25 | 5.5 | V | 8 | ||
| High level output current at VCCO=5V | IOH | -4 | mA | VCCO=5V | 8 | ||
| Low level output current at VCCO=5V | IOL | 4 | mA | VCCO=5V | 8 | ||
| Data rate | DR | 0 | 100 | Mbps | 8 | ||
| Ambient temperature | TA | -40 | 125 | °C | 8 | ||
| Junction to ambient thermal resistance | RθJA | 83.5 | °C/W | 8 | |||
| Junction to case (top) thermal resistance | RθJC | 40 | °C/W | 8 | |||
| Under voltage lockout, VCCx rising | UVLOR | 2.05 | 2.25 | V | VCCx rising | 11 | |
| Under voltage lockout, VCCx falling | UVLOF | 1.7 | 1.9 | V | VCCx falling | 11 | |
| Under voltage lockout hysteresis | UVLOHYS | 0.15 | V | 11 | |||
| Current on VCC1 with DC signal (Q1) | ICC1_Q1 | 0.5 | 0.8 | mA | 5V; VI=VCCI (SiLM5740), VI=0V (SiLM5740F), EN2=0V | 11 | |
| Current on VCC1 with DC signal (Q2) | ICC1_Q2 | 5 | 7 | mA | 5V; VI=0V (SiLM5740), VI=VCCI (SiLM5740F), EN2=0V | 11 | |
| Current on VCC1 with DC signal (Q3) | ICC1_Q3 | 0.5 | 0.8 | mA | 5V; VI=VCCI (SiLM5740), VI=0V (SiLM5740F), EN2=VCC2 | 11 | |
| Current on VCC1 with DC signal (Q4) | ICC1_Q4 | 5 | 7 | mA | 5V; VI=0V (SiLM5740), VI=VCCI (SiLM5740F), EN2=VCC2 | 11 | |
| Current on VCC2 with DC signal (Q1) | ICC2_Q1 | 0.6 | 0.8 | mA | 5V; VI=VCCI (SiLM5740), VI=0V (SiLM5740F), EN2=0V | 11 | |
| Current on VCC2 with DC signal (Q2) | ICC2_Q2 | 0.6 | 0.8 | mA | 5V; VI=0V (SiLM5740), VI=VCCI (SiLM5740F), EN2=0V | 11 | |
| Current on VCC2 with DC signal (Q3) | ICC2_Q3 | 2.5 | 3.8 | mA | 5V; VI=VCCI (SiLM5740), VI=0V (SiLM5740F), EN2=VCC2 | 11 | |
| Current on VCC2 with DC signal (Q4) | ICC2_Q4 | 2.6 | 3.9 | mA | 5V; VI=0V (SiLM5740), VI=VCCI (SiLM5740F), EN2=VCC2 | 11 | |
| Current on VCC1 with AC signal, 1 Mbps | ICC1_OP_1M | 2.6 | 3.7 | mA | 5V; 1 Mbps, CL=15pF, all channels switching | 11 | |
| Current on VCC1 with AC signal, 10 Mbps | ICC1_OP_10M | 2.6 | 3.6 | mA | 5V; 10 Mbps, CL=15pF, all channels switching | 11 | |
| Current on VCC1 with AC signal, 100 Mbps | ICC1_OP_100M | 2.8 | 4.3 | mA | 5V; 100 Mbps, CL=15pF, all channels switching | 11 | |
| Current on VCC2 with AC signal, 1 Mbps | ICC2_OP_1M | 3.1 | 4.9 | mA | 5V; 1 Mbps, CL=15pF, all channels switching | 11 | |
| Current on VCC2 with AC signal, 10 Mbps | ICC2_OP_10M | 7.2 | 10 | mA | 5V; 10 Mbps, CL=15pF, all channels switching | 11 | |
| Current on VCC2 with AC signal, 100 Mbps | ICC2_OP_100M | 28.6 | 38 | mA | 5V; 100 Mbps, CL=15pF, all channels switching | 12 | |
| High level input current | IIH | 15 | uA | INx=VCCI | 14 | ||
| Low level input current | IIL | -15 | uA | INx=0V | 14 | ||
| Low level output voltage | VOL | 0.12 | 0.3 | V | IOL=4mA, 5V | 14 | |
| Output high level common mode transient immunity | CMTIH | 100 | 150 | kV/us | VI=VCCI, VCM=1200V, CL=15pF, 5V | 14 | |
| Output low level common mode transient immunity | CMTIL | 100 | 150 | kV/us | VI=0V, VCM=1200V, CL=15pF, 5V | 14 | |
| Propagation delay, low to high | tPLH | 12 | 20 | ns | CL=15pF, 5V | 14 | |
| Propagation delay, high to low | tPHL | 12 | 20 | ns | CL=15pF, 5V | 14 | |
| Turn on rise time | tr | 2 | ns | CL=15pF, 5V | 14 | ||
| Turn off fall time | tf | 2 | ns | CL=15pF, 5V | 14 | ||
| Pulse width distortion | tPWD | 10 | ns | CL=15pF, 5V | 14 | ||
| Channel to channel output skew time | tSKO | 8 | ns | CL=15pF, same direction in single device, 5V | 14 | ||
| Part to part skew time | tSKP | 8 | ns | CL=15pF, same direction, 5V | 14 | ||
| Disable propagation delay, high to high impedance output | tPHZ | 8 | ns | 5V | 14 | ||
| Disable propagation delay, low to high impedance output | tPLZ | 8 | ns | 5V | 14 | ||
| Enable propagation delay, high impedance to high output (SiLM5740F) | tPZH | 1 | us | SiLM574xF, 5V | 14 | ||
| Enable propagation delay, high impedance to low output (SiLM5740F) | tPZL | 7 | ns | SiLM574xF, 5V | 15 | ||
| Default output delay time from input power loss | tDO | 0.05 | us | Measured from VCC1 below 1.7V, 5V | 15 |
CAD (KiCad official)
- Symbol:
SiLM5740FCG-DG - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
silm5740fcg-dg-etched.step/silm5740fcg-dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);silm5740fcg-dg.step/silm5740fcg-dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sillumin datasheet (30 pp, sha256
2499b0d50e8d10d0, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).