component
TPS78233DDCR
Public Unreviewedby Ray
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TSOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTPS78233DDCR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5
TPS78233DDCR from Texas Instruments, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, 2.2 V to 5.5 V. Place a small ~0.1 µF (typical 1.0 µF) ceramic capacitor from this pin to ground close to the IC; tie the input and output capacitor grounds back together with minimal impedance. |
| 2 | GND | power_in | Device ground. Tie all ground pins to a common ground plane for proper operation. |
| 3 | EN | input | Enable pin (CMOS logic-compatible). Drive above 1.2 V to turn the regulator on; drive below 0.4 V to enter shutdown, reducing operating current to ~18 nA typical. EN voltage range 0 V to VIN. |
| 4 | GND | power_in | Device ground. Tie all ground pins to a common ground plane for proper operation. |
| 5 | OUT | power_out | Regulated 3.3-V output pin, up to 150 mA. Requires a small ~1 µF ceramic capacitor to ground for stability. Line/load regulation within ±1-2% over recommended conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TPS78233DDCRTPS78233DDCRDDCTTPS78233DDCRDRVRTPS78233DDCRDRVT
CAD (KiCad official)
- Symbol:
TPS78233DDCR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
a31aff4383a6b412, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).