component
LM2700MT-ADJ
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLM2700MT-ADJ
Texas Instruments · DC-DC Converters · TSSOP-14
LM2700MT-ADJ from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VC | output | Compensation network connection connected to the output of the voltage error amplifier. |
| 2 | FB | input | Output voltage feedback input. |
| 3 | SHDN | input | Shutdown control input, active low. |
| 4 | AGND | power_in | Analog ground. |
| 5 | PGND | power_in | Power ground that must be connected together directly at the part. |
| 6 | PGND | power_in | Power ground that must be connected together directly at the part. |
| 7 | PGND | power_in | Power ground that must be connected together directly at the part. |
| 8 | SW | tri_state | Power switch node with switch connected between SW pins and PGND pins. |
| 9 | SW | tri_state | Power switch node with switch connected between SW pins and PGND pins. |
| 10 | SW | tri_state | Power switch node with switch connected between SW pins and PGND pins. |
| 11 | NC | unconnected | Pin not connected internally. |
| 12 | VIN | power_in | Analog power input. |
| 13 | FSLCT | input | Switching frequency select input where VIN-level selects 1.25MHz and ground selects 600kHz. |
| 14 | NC | unconnected | Pin not connected internally; connect to ground externally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Power Management (PMIC) |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
LM2700MT-ADJ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
lm2700mt-adj-etched.step/lm2700mt-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2700mt-adj.step/lm2700mt-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
c83e7022b7437d78, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).