3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTF2183M-TR
JSMSEMI · Gate Drivers · SOP-8
TF2183M-TR from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HIN | input | High-side logic signal input, with a logic high threshold (VIH) of 2.5 V min and a low threshold (VIL) of 0.8 V max, and range 0 to VCC. |
| 2 | LIN | input | Low-side logic signal input (active low, shown with overbar), with VIH 2.5 V min and VIL 0.8 V max, and range 0 to VCC. |
| 3 | COM | power_in | Ground pin (listed as VSS in the block diagram), the reference for all voltage ratings. |
| 4 | LO | output | Low-side gate drive output, 0 V to VCC, with 4.0 A typical source/sink short-circuit pulse current (3.0 A min). |
| 5 | VCC | power_in | Low-side supply voltage, recommended 10 V to 20 V (absolute max 25 V), with UVLO positive threshold 8.9 V typ and negative threshold 8.2 V typ. |
| 6 | VS | power_in | High-side floating ground (supply return), operating range -9 V to 700 V. |
| 7 | HO | output | High-side gate drive output, swinging between VS and VB, with 4.0 A typical short-circuit pulse current. |
| 8 | VB | power_in | High-side floating supply, recommended VS+10 V to VS+20 V (absolute max 725 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TF2183M-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tf2183m-tr-etched.step/tf2183m-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tf2183m-tr.step/tf2183m-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (8 pp, sha256
acb42eda1bdeceea, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).