3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownVS-50TPS12L-M3
Vishay Intertech · TRIACs · TO-247AD
VS-50TPS12L-M3 from Vishay Intertech, in a TO-247AD. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode terminal of the SCR, with maximum average on-state current IT(AV) of 50 A and maximum continuous RMS on-state current of 79 A as AC switch. |
| 2 | A | passive | Anode terminal of the SCR, rated for a repetitive peak off-state voltage VDRM/VRRM of 1200 V. |
| 3 | G | input | Gate trigger input with required DC gate voltage to trigger VGT of at most 1.6 V at TJ = -40 °C, peak gate current IGM of 2.5 A, and peak negative gate voltage -VGM of 10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TO-247AD |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Repetitive peak off-state and reverse voltage | VRRM/VDRM | 1200 | V | 1 | |||
| Non-repetitive peak reverse voltage | VRSM | 1300 | V | 1 | |||
| Repetitive peak reverse and off-state leakage current | IRRM/IDRM | 10 | mA | AT 125 °C | 1 | ||
| Maximum average on-state current | IT(AV) | 50 | A | TC = 112 °C, 180° conduction half sine wave | 2 | ||
| Maximum continuous RMS on-state current as AC switch | IT(RMS) | 79 | A | 2 | |||
| Peak one-cycle non-repetitive surge current | ITSM | 530 | A | 10 ms sine pulse, rated VRRM applied, Initial TJ = TJ maximum | 2 | ||
| Peak one-cycle non-repetitive surge current | ITSM | 630 | A | 10 ms sine pulse, no voltage reapplied | 2 | ||
| I2t for fusing | I2t | 1405 | A2s | 10 ms sine pulse, rated VRRM applied | 2 | ||
| I2t for fusing | I2t | 1986 | A2s | 10 ms sine pulse, no voltage reapplied | 2 | ||
| I2t for fusing | I2t | 19850 | A2s | t = 0.1 ms to 10 ms, no voltage reapplied, TJ = 125 °C | 2 | ||
| Low level value of threshold voltage | VT(TO)1 | 0.89 | V | TJ = 125 °C | 2 | ||
| High level value of threshold voltage | VT(TO)2 | 0.97 | V | 2 | |||
| Low level value of on-state slope resistance | rt1 | 6.77 | mΩ | 2 | |||
| High level value of on-state slope resistance | rt2 | 6.32 | mΩ | 2 | |||
| On-state voltage | VT | 1.2 | 1.32 | V | 50 A, TJ = 25 °C | 2 | |
| On-state voltage | VT | 1.4 | 1.6 | V | 100 A, TJ = 25 °C | 2 | |
| Rate of rise of turned-on current | dI/dt | 150 | A/μs | TJ = 25 °C | 2 | ||
| Holding current | IH | 300 | mA | Anode supply = 6 V, resistive load, TJ = 25 °C | 2 | ||
| Latching current | IL | 350 | mA | 2 | |||
| Reverse and direct leakage current | IRRM/IDRM | 0.05 | mA | TJ = 25 °C | 2 | ||
| Reverse and direct leakage current | IRRM/IDRM | 10 | mA | TJ = 125 °C | 2 | ||
| Rate of rise of off-state voltage | dV/dt | 1000 | V/μs | TJ = TJ maximum, linear to 80 % VDRM, Rg-k = | 2 | ||
| Peak gate power | PGM | 10 | W | 10 ms sine pulse, no voltage reapplied | 2 | ||
| Average gate power | PG(AV) | 2.5 | W | 2 | |||
| Peak gate current | IGM | 2.5 | A | 2 | |||
| Peak negative gate voltage | -VGM | 10 | V | 2 | |||
| Required DC gate voltage to trigger | VGT | 1.6 | V | TJ = -40 °C, Anode supply = 6 V resistive load | 2 | ||
| Required DC gate voltage to trigger | VGT | 1.5 | V | TJ = 25 °C | 2 | ||
| Required DC gate voltage to trigger | VGT | 1 | V | TJ = 150 °C | 2 | ||
| Required DC gate current to trigger | IGT | 160 | mA | TJ = -40 °C, Anode supply = 6 V resistive load | 2 | ||
| Required DC gate current to trigger | IGT | 45 | 100 | mA | TJ = 25 °C | 2 | |
| Required DC gate current to trigger | IGT | 60 | mA | TJ = 150 °C | 2 | ||
| DC gate voltage not to trigger | VGD | 0.2 | V | TJ = 150 °C, VDRM = rated value | 2 | ||
| DC gate current not to trigger | IGD | 3 | mA | 2 | |||
| Turn-on time | tgt | 1.5 | μs | IT = 50 A, VD = 50 % VDRM, Igt = 300 mA, TJ = 25 °C | 2 | ||
| Turn-off time | tq | 92 | μs | IT = 50 A, VD = 80 % VDRM, dV/dt = 20 V/μs, tp = 200 μs; Igt = 100 mA, dI/dt = 10 A/μs, VR = 100 V, TJ = 150 °C | 2 | ||
| Maximum junction and storage temperature range | TJ, TStg | -40 | 150 | °C | 3 | ||
| Maximum thermal resistance, junction to case | RthJC | 0.35 | °C/W | 3 | |||
| Maximum thermal resistance, junction to ambient | RthJA | 40 | °C/W | 3 | |||
| Typical thermal resistance, case to heatsink | RthCS | 0.2 | °C/W | Mounting surface, smooth, and greased | 3 |
CAD (KiCad official)
- Symbol:
VS-50TPS12L-M3 - Footprint:
Package_TO_SOT_THT:TO-247-3_Vertical - 3D model: TO-247AD (KiCad packages3D, STEP)
- 3D model files:
vs-50tps12l-m3-etched.step/vs-50tps12l-m3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);vs-50tps12l-m3.step/vs-50tps12l-m3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (7 pp, sha256
792395af944e8122, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).