Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HC32F030K8TA-LQFP64

HDSC · HDSC · LQFP-64(10x10)

HC32F030K8TA-LQFP64 from HDSC, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCAP power_out LDO core-supply output for internal circuits only; an external decoupling capacitor of not less than 1 µF is required.
2 PC13 bidirectional GPIO PC13 with alternate functions TIM3_CH1B (PSEL table) and LVD_IN0 (LVD voltage-detection input 0).
3 XTLI/PC14 passive Low-speed crystal oscillator input (XTL, 32.768 kHz) shared with GPIO PC14; the load capacitance must follow the crystal manufacturer's specification.
4 XTLO/PC15 passive Low-speed crystal oscillator output (XTL, 32.768 kHz) shared with GPIO PC15; the load capacitance must follow the crystal manufacturer's specification.
5 PD00 passive High-speed crystal oscillator input (XTH, 4-32 MHz) shared with GPIO PD00, which also carries I2C0_SDA and UART1_TXD.
6 PD01 passive High-speed crystal oscillator output (XTH, 4-32 MHz) shared with GPIO PD01, which also carries I2C0_SCL, TIM4_CHB and UART1_RXD.
7 RESETB input Active-low reset input in CMOS with a non-disconnectable pull-up (about 80 kΩ), input filter pulse 100 ns and non-filter pulse 300 ns, VIH 0.7VCC to VCC+0.3 V, VIL -0.3 to 0.3VCC.
8 PC00 bidirectional GPIO PC00 with alternate functions UART1_CTS, analog input AIN10, and comparator inputs VC0_INP0 and VC1_INN0.
9 PC01 bidirectional GPIO PC01 with alternate functions TIM5_CHB and UART1_RTS, analog input AIN11, and comparator inputs VC0_INP1 and VC1_INN1.
10 PC02 bidirectional GPIO PC02 with alternate function SPI1_MISO, analog input AIN12, and comparator inputs VC0_INP2 and VC1_INN2.
11 PC03 bidirectional GPIO PC03 with alternate function SPI1_MOSI, analog input AIN13, and comparator inputs VC0_INP3 and VC1_INN3.
12 AVSS power_in Analog ground (模拟地); all voltages in the datasheet are referenced to VSS.
13 AVCC power_in Analog supply, 1.8-5.5 V, which must be the same voltage as DVCC, with at most 300 mV difference between DVCC and AVCC during power-up and operation.
14 PA00 bidirectional GPIO PA00 with digital alternate functions UART1_CTS, TIM0_ETR, VC0_OUT, TIM1_CHA, TIM3_ETR, TIM0_CHA, and analog input AIN0 with comparator inputs VC0_INP4, VC0_INN0, VC1_INP0, VC1_INN4.
15 PA01 bidirectional GPIO PA01 with digital alternate functions UART1_RTS, TIM0_CHB, TIM1_ETR, TIM1_CHB, HCLK_OUT, SPI1_MOSI, and analog input AIN1 with comparator inputs VC0_INP5, VC0_INN1, VC1_INP1, VC1_INN5.
16 PA02 bidirectional GPIO PA02 with digital alternate functions UART1_TXD, TIM0_CHA, VC1_OUT, TIM1_CHA, TIM2_CHA, PCLK_OUT, SPI1_MISO, and analog input AIN2 with comparator inputs VC0_INP6, VC0_INN2, VC1_INP2.
17 PA03 bidirectional GPIO PA03 with digital alternate functions UART1_RXD, TIM0_GATE, TIM1_CHB, TIM2_CHB, SPI1_CS, TIM3_CH1A and TIM5_CHA.
18 PD04 bidirectional GPIO PD04; the datasheet's PSEL alternate-function table lists no function for this pin.
19 PD05 bidirectional GPIO PD05; the datasheet's PSEL alternate-function table lists no function for this pin.
20 PA04 bidirectional GPIO PA04 with digital alternate functions SPI0_CS, UART1_TXD, PCA_CH4, TIM2_ETR, TIM5_CHA, LVD_OUT and TIM3_CH2B.
21 PA05 bidirectional GPIO PA05 with digital alternate functions SPI0_SCK, TIM0_ETR, PCA_ECI, TIM0_CHA, TIM5_CHB, XTL_OUT and XTH_OUT.
22 PA06 bidirectional GPIO PA06 with digital alternate functions SPI0_MISO, PCA_CH0, TIM3_BK, TIM1_CHA, VC0_OUT and TIM3_GATE.
23 PA07 bidirectional GPIO PA07 with digital alternate functions SPI0_MOSI, PCA_CH1, HCLK_OUT, TIM3_CH0B, TIM2_CHA, VC1_OUT and TIM4_CHB.
24 PC04 bidirectional GPIO PC04 with digital alternate functions TIM2_ETR and IR_OUT.
25 PC05 bidirectional GPIO PC05 with digital alternate functions TIM6_CHB and PCA_CH4.
26 PB00 bidirectional GPIO PB00 with digital alternate functions PCA_CH2, TIM3_CH1B, TIM5_CHB, RCH_OUT, RCL_OUT and PLL_OUT.
27 PB01 bidirectional GPIO PB01 with digital alternate functions PCA_CH3, PCLK_OUT, TIM3_CH2B and TIM6_CHB.
28 PB02 bidirectional GPIO PB02 with digital alternate functions PCA_ECI, TIM4_CHA, TIM1_BK, TIM0_BK and TIM2_BK.
29 PB10 bidirectional GPIO PB10 with digital alternate functions I2C1_SCL, SPI1_SCK, TIM1_CHA, TIM3_CH1A and UART1_RTS.
30 PB11 bidirectional GPIO PB11 with digital alternate functions I2C1_SDA, TIM1_CHB, TIM2_GATE, TIM6_CHA and UART1_CTS.
31 DVSS power_in Digital ground (数字地).
32 DVCC power_in Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC.
33 PB12 bidirectional GPIO PB12 with digital alternate functions SPI1_CS, TIM3_BK, TIM0_BK and TIM6_CHA.
34 PB13 bidirectional GPIO PB13 with digital alternate functions SPI1_SCK, I2C1_SCL, TIM3_CH0B, TIM1_CHA, TIM1_GATE and TIM6_CHB.
35 PB14 bidirectional GPIO PB14 with digital alternate functions SPI1_MISO, I2C1_SDA, TIM3_CH1B, TIM0_CHA and TIM1_BK.
36 PB15 bidirectional GPIO PB15 with digital alternate functions SPI1_MOSI, TIM3_CH2B, TIM0_CHB and TIM0_GATE.
37 PC06 bidirectional GPIO PC06 with digital alternate functions PCA_CH0, TIM4_CHA and TIM2_CHA.
38 PC07 bidirectional GPIO PC07 with digital alternate functions PCA_CH1, TIM5_CHA and TIM2_CHB.
39 PC08 bidirectional GPIO PC08 with digital alternate functions PCA_CH2, TIM6_CHA and TIM2_ETR.
40 PC09 bidirectional GPIO PC09 with digital alternate functions PCA_CH3, TIM4_CHB and TIM1_ETR.
41 PA08 bidirectional GPIO PA08 with digital alternate functions UART0_TXD, TIM3_CH0A, TIM1_GATE, TIM4_CHA and TIM3_BK.
42 PA09 bidirectional GPIO PA09 with digital alternate functions UART0_TXD, TIM3_CH1A, TIM0_BK, I2C0_SCL, HCLK_OUT and TIM5_CHA; PA09 is a recommended ISP programming pin.
43 PA10 bidirectional GPIO PA10 with digital alternate functions UART0_RXD, TIM3_CH2A, TIM2_BK, I2C0_SDA, TIM2_GATE, PCLK_OUT and TIM6_CHA; PA10 is a recommended ISP programming pin.
44 PA11 bidirectional GPIO PA11 with digital alternate functions UART0_CTS, TIM3_GATE, I2C1_SCL, VC0_OUT, SPI0_MISO and TIM4_CHB.
45 PA12 bidirectional GPIO PA12 with digital alternate functions UART0_RTS, TIM3_ETR, I2C1_SDA, VC1_OUT and SPI0_MOSI.
46 PA13/SWDIO bidirectional SWD debug data I/O (SWDIO) shared with GPIO PA13, which also carries IR_OUT, UART0_RXD, LVD_OUT and TIM3_ETR; PA13 and PA14 are the SWD programming interface.
47 PD06 bidirectional GPIO PD06 with digital alternate functions I2C1_SCL and UART0_CTS.
48 PD07 bidirectional GPIO PD07 with digital alternate functions I2C1_SDA and UART0_RTS.
49 PA14/SWCLK bidirectional SWD debug clock (SWCLK) shared with GPIO PA14, which also carries UART1_TXD, UART0_TXD, TIM3_CH2A, LVD_OUT, RCH_OUT, RCL_OUT and PLL_OUT; PA13 and PA14 are the SWD programming interface.
50 PA15 bidirectional GPIO PA15 with digital alternate functions SPI0_CS, UART1_RXD, TIM0_ETR, TIM0_CHA and TIM3_CH1A.
51 PC10 bidirectional GPIO PC10 with digital alternate function PCA_CH2.
52 PC11 bidirectional GPIO PC11 with digital alternate function PCA_CH3.
53 PC12 bidirectional GPIO PC12 with digital alternate function PCA_CH4.
54 PD02 bidirectional GPIO PD02 with digital alternate functions PCA_ECI and TIM1_ETR.
55 PB03 bidirectional GPIO PB03 with digital alternate functions SPI0_SCK, TIM0_CHB, TIM1_GATE, TIM3_CH0A, XTL_OUT and XTH_OUT.
56 PB04 bidirectional GPIO PB04 with digital alternate functions SPI0_MISO, PCA_CH0, TIM2_BK, UART0_CTS, TIM2_GATE and TIM3_CH0B.
57 PB05 bidirectional GPIO PB05 with digital alternate functions SPI0_MOSI, TIM1_BK, PCA_CH1 and UART0_RTS.
58 PB06 bidirectional GPIO PB06 with digital alternate functions I2C0_SCL, UART0_TXD, TIM1_CHB, TIM0_CHA and TIM3_CH0A.
59 PB07 bidirectional GPIO PB07 with digital alternate functions I2C0_SDA, UART0_RXD, TIM2_CHB and TIM0_CHB; PB07 is also an LVD monitoring source.
60 BOOT0 input Boot mode pin sampled at reset: high selects ISP programming mode, low selects user mode executing Flash code with SWD programming access.
61 PB08 bidirectional GPIO PB08 with digital alternate functions I2C0_SCL, TIM1_CHA, TIM2_CHA, TIM0_GATE, TIM3_CH2A and UART0_TXD.
62 PB09 bidirectional GPIO PB09 with digital alternate functions I2C0_SDA, IR_OUT, SPI1_CS, TIM2_CHA, TIM2_CHB and UART0_RXD.
63 DVSS power_in Digital ground (数字地).
64 DVCC power_in Digital supply, 1.8-5.5 V (DVCC), which must be the same voltage as AVCC.

Key specifications

Parameter Value
Manufacturer HDSC
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC-VSS (external main supply, incl. AVCC and DVCC) VCC - VSS -0.3 5.5 V 38
Voltage difference between different supply pins /ΔVCCx/ 50 mV 38
Voltage difference between different ground pins /VSSx - VSS/ 50 mV 38
Total current through DVCC/AVCC supply lines IVCC 300 mA 39
Total current through VSS ground lines IVSS 300 mA 39
Output sink current, any I/O and control pin IIO 25 mA 39
Output current, any I/O and control pin IIO -25 mA 39
Injection current, RESETB pin IINJ(PIN) -5 5 mA 39
Injection current, XTHI pin and XTLI pin IINJ(PIN) -5 5 mA 39
Injection current, other pins IINJ(PIN) -5 5 mA 39
Total injection current, all I/O and control pins ΣIINJ(PIN) -25 25 mA 39
Storage temperature range TSTG -60 150 ℃ 39
Maximum junction temperature TJ 105 ℃ 39
Internal AHB clock frequency fHCLK 0 48 MHz 39
Internal APB0 clock frequency fPCLK0 0 48 MHz 39
Internal APB1 clock frequency fPCLK1 0 48 MHz 39
Digital supply operating voltage DVCC 1.8 5.5 V 39
Analog supply operating voltage AVCC 1.8 5.5 V 必须与DVCC相同 39
Power dissipation, LQFP64 package PD 455 mW TA=85℃ 39
Ambient temperature, maximum power consumption TA -40 85 ℃ 最大功率消耗 40
Ambient temperature, low power consumption TA -40 105 ℃ 低功率消耗 40
Junction temperature range TJ -40 105 ℃ 40
VCC rising slew rate tVcc 0 μs/V 40
VCC falling slew rate tVcc 10 μs/V 40
POR release voltage (power-up) / BOR detection voltage (power-down) Vpor 1.45 1.5 1.65 V 40
LVD detection threshold, LVD_CR.VTDS=0000 Vlevel 1.7 1.8 1.9 V LVD_CR.VTDS=0000 41
LVD detection threshold, LVD_CR.VTDS=0001 Vlevel 1.8 1.9 2 V LVD_CR.VTDS=0001 41
LVD detection threshold, LVD_CR.VTDS=0010 Vlevel 1.9 2 2.1 V LVD_CR.VTDS=0010 41
LVD detection threshold, LVD_CR.VTDS=0011 Vlevel 2 2.1 2.2 V LVD_CR.VTDS=0011 41
LVD detection threshold, LVD_CR.VTDS=0100 Vlevel 2.1 2.2 2.3 V LVD_CR.VTDS=0100 41
LVD detection threshold, LVD_CR.VTDS=0101 Vlevel 2.2 2.3 2.4 V LVD_CR.VTDS=0101 41
LVD detection threshold, LVD_CR.VTDS=0110 Vlevel 2.3 2.4 2.5 V LVD_CR.VTDS=0110 41
LVD detection threshold, LVD_CR.VTDS=0111 Vlevel 2.4 2.5 2.6 V LVD_CR.VTDS=0111 41
LVD detection threshold, LVD_CR.VTDS=1000 Vlevel 2.5 2.6 2.7 V LVD_CR.VTDS=1000 41
LVD detection threshold, LVD_CR.VTDS=1001 Vlevel 2.6 2.7 2.8 V LVD_CR.VTDS=1001 41
LVD detection threshold, LVD_CR.VTDS=1010 Vlevel 2.7 2.8 2.9 V LVD_CR.VTDS=1010 41
LVD detection threshold, LVD_CR.VTDS=1011 Vlevel 2.8 2.9 3 V LVD_CR.VTDS=1011 41
LVD detection threshold, LVD_CR.VTDS=1100 Vlevel 2.9 3 3.1 V LVD_CR.VTDS=1100 41
LVD detection threshold, LVD_CR.VTDS=1101 Vlevel 3 3.1 3.2 V LVD_CR.VTDS=1101 41
LVD detection threshold, LVD_CR.VTDS=1110 Vlevel 3.1 3.2 3.3 V LVD_CR.VTDS=1110 41
LVD detection threshold, LVD_CR.VTDS=1111 Vlevel 3.2 3.3 3.4 V LVD_CR.VTDS=1111 41
External input voltage range for LVD Vex 0 V 41
Internal 2.5V reference voltage, 25°C VREF25 2.475 2.5 2.525 V 常温25°C 3.3V 41
Internal 2.5V reference voltage, -40~85°C VREF25 2.463 2.5 2.525 V -4085°C 2.85.5V 41
Internal 1.5V reference voltage, 25°C VREF15 1.485 1.5 1.515 V 常温25°C 3.3V 41
Internal 1.5V reference voltage, -40~85°C VREF15 1.477 1.5 1.519 V -4085°C 1.85.5V 41

CAD (KiCad official)

  • Symbol: HC32F030K8TA-LQFP64
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: hc32f030k8ta-lqfp64-etched.step / hc32f030k8ta-lqfp64-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hc32f030k8ta-lqfp64.step / hc32f030k8ta-lqfp64.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HDSC datasheet (80 pp, sha256 c1f5c05168fa2ea7, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF