component
LTV-3223
Public Unreviewedby Ray
Lite On Solid State Relays (Triac Output), DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownLTV-3223
Lite On · Solid State Relays (Triac Output) · DIP-8
LTV-3223 from Lite On, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | LED cathode on the input (control) side. Tied internally with pins 3 and 4. Drive the LED with IF up to 50 mA (VF ~1.2 V typ, 1.3 V max at IF=20 mA) to activate the phototriac and turn on the output. |
| 2 | Anode | passive | LED anode on the input (control) side. Apply forward current (typ 5-20 mA) through a series resistor to trigger the output triac. Reverse voltage must not exceed 6 V. |
| 3 | Cathode | passive | LED cathode connection, internally tied to pins 1 and 4. Provided for PCB layout flexibility on the input side of the SSR. |
| 4 | Cathode | passive | LED cathode connection, internally tied to pins 1 and 3. Provided for PCB layout flexibility on the input side of the SSR. |
| 5 | Gate | passive | Main triac gate terminal on the output (load) side. Internally driven by the phototriac detector; typically brought out for optional snubber/gate network on high dv/dt loads (dv/dt min 200 V/µs). |
| 6 | Output | passive | Main terminal of the output triac (MT1/MT2). Handles the AC load; rated 1.2 A RMS on-state, 600 V peak off-state, 12 A non-repetitive surge, VTM ≤ 2.5 V at IF=10 mA. Internally tied to pin 8. |
| 7 | NC | unconnected | No internal connection. The functional diagram for the LTV-3223 does not assign a signal to pin 7 of the 8-pin DIP; leave floating or use for creepage/routing. |
| 8 | Output | passive | Main terminal of the output triac (MT1/MT2). Handles the AC load; rated 1.2 A RMS on-state, 600 V peak off-state. Internally tied to pin 6 for redundant PCB routing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lite On |
| Package | DIP-8 |
| Category | Optoisolators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LTV-3223LTV-3223MLTV-3223SLTV-3223S-TALTV-3223S-TA1
CAD (KiCad official)
- Symbol:
LTV-3223 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lite On datasheet (11 pp, sha256
d0c70e1b2093d3a0, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).