3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1700T-3002E
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
MCP1700T-3002E from Microchip Tech, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the 1.6 µA typical LDO bias current flows out of this pin, and output regulation is referenced to it. |
| 2 | VIN | power_in | Unregulated supply input for 2.3V to 6.0V operation; connect to the input source with about 1 µF of capacitance for stable operation. |
| 3 | VOUT | power_out | Regulated voltage output delivering up to 250 mA (200 mA for outputs below 2.5V); connect to the load and a 1 µF output capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | 6 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 1.6 | 4 | µA | IL = 0 mA, VIN = VR + 1V | 3 | |
| Maximum Output Current | IOUT_mA | 250 | mA | For VR ≥ 2.5V | 3 | ||
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | -1 | 0.75 | 1 | %/V | (VR + 1)V ≤ VIN ≤ 6V, typ ±0.75 | 3 |
| Load Regulation | ΔVOUT/VOUT | -1.5 | 1 | 1.5 | % | IL = 0.1 mA to 250 mA for VR ≥ 2.5V, Note 4, typ ±1.0 | 3 |
| Dropout Voltage | VIN-VOUT | 178 | 350 | mV | VR ≥ 2.5V, IL = 250 mA, (Note 1, Note 5) | 3 | |
| Output Short Circuit Current | IOUT_SC | 408 | mA | VIN = VR + 1V, VOUT = GND, peak current measured 10 ms after short is applied | 3 | ||
| VOUT Temperature Coefficient | TCVOUT | 50 | ppm/°C | Note 3 | 3 | ||
| Output Rise Time | TR | 500 | µs | 10% VR to 90% VR, VIN = 0V to 6V, RL = 50 Ω resistive | 3 | ||
| Output Noise | eN | 3 | µV/√Hz | IL = 100 mA, f = 1 kHz, COUT = 1 µF | 4 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 44 | dB | f = 100 Hz, COUT = 1 µF, IL = 50 mA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V | 4 | ||
| Thermal Shutdown Protection | TSD | 140 | °C | VIN = VR + 1V, IL = 100 µA | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage | VDD | 6.5 | V | 3 | |||
| Input/Output Voltage | -0.3 | 0.3 | V | All inputs and outputs w.r.t. (VSS - 0.3V) to (VIN + 0.3V); max is VIN + 0.3V | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| ESD protection HBM | 4 | kV | All pins, HBM (≥ 4 kV as printed) | 3 | |||
| ESD protection MM | 400 | V | All pins, MM (≥ 400V as printed) | 3 | |||
| Thermal Resistance, SOT-89, Junction to Ambient | θJA | 104 | °C/W | EIA/JEDEC JESD51-7 FR-4 4-Layer Board | 4 | ||
| Thermal Resistance, SOT-89, Junction to Case (Top) | θJC(Top) | 74 | °C/W | EIA/JEDEC JESD51-7 FR-4 4-Layer Board | 4 | ||
| Thermal Resistance, SOT-89, Junction to Top characterization | ΨJT | 30 | °C/W | EIA/JEDEC JESD51-7 FR-4 4-Layer Board | 4 |
CAD (KiCad official)
- Symbol:
MCP1700T-3002E - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1700t-3002e-mb-etched.step/mcp1700t-3002e-mb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1700t-3002e-mb.step/mcp1700t-3002e-mb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
44919ee695b5d6ef, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).