component
TMF0265
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTMF0265
TM Shenzhen Titan Micro Elec · AC-DC Controllers And Regulators · DIP-8
TMF0265 from TM Shenzhen Titan Micro Elec, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD-G | power_in | Internal driver supply input that connects through a resistor to VDD; the datasheet gives no voltage limit for this pin. |
| 2 | VDD | power_in | Supply input with a recommended operating range of 10 to 23 V and an absolute maximum of 30 V. |
| 3 | FB | input | Voltage feedback pin driven from an external optocoupler, with a recommended input of 0 to 5 V and an absolute range of -0.3 to 6.0 V. |
| 4 | CS | input | Current sense pin connected to the power MOSFET source and an external sense resistor, with an input range of -0.3 to 5.0 V. |
| 5 | DRAIN | passive | Drain of the integrated power MOSFET, which the datasheet rates at a minimum drain-source breakdown voltage (BVDSS) of 650 V. |
| 6 | DRAIN | passive | Drain of the integrated power MOSFET, which the datasheet rates at a minimum drain-source breakdown voltage (BVDSS) of 650 V. |
| 7 | GND | power_in | Ground pin for the controller, referenced to the system ground. |
| 8 | GND | power_in | Ground pin for the controller, referenced to the system ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM Shenzhen Titan Micro Elec |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 启动电压 (VDD turn-on voltage) | VDD-ON | 14.5 | 15.5 | 16.5 | V | 4 | |
| 关闭电压 (VDD turn-off voltage) | VDD-OFF | 8.5 | 9.5 | 10.5 | V | 4 | |
| 启动电流 (start-up current) | IDD-ST | 5 | 20 | uA | VDD=VDD-ON- 0.5V | 4 | |
| 正常工作电流 (operating current) | IDD-OP | 2.5 | 4 | mA | 4 | ||
| VDD 过压保护 (VDD overvoltage protection) | VDD-OVP | 23 | 24 | V | 4 | ||
| VDD 钳位电压 (VDD clamp voltage) | VDD-CLAMP | 25 | 27 | V | IDD=5mA | 4 | |
| FB 开路电压 (FB open voltage) | VFB-OPEN | 4.2 | 4.7 | 5.2 | V | 4 | |
| 电流限流值（峰值）(current limit, peak) | VCSTH-H | 1 | 1.1 | V | 4 | ||
| 电流限制值（谷值）(current limit, valley) | VCSTH-L | 0.7 | 0.8 | V | 4 | ||
| 振荡频率 (oscillation frequency) | fOSC | 63 | 67 | 71 | KHz | 5 | |
| 抖频范围 (frequency shuffling range) | f△SHUFFLING | -6 | 6 | % | 5 | ||
| 频偏 vs VDD (frequency variation vs VDD) | fDV | 0.2 | 1 | % | VDD=10V to 23V | 5 | |
| 最大占空比 (maximum duty cycle) | DMAX | 75 | 80 | 85 | % | 5 | |
| 导通电阻 TMF0265 (on-resistance) | RDS-ON | 4.7 | 5.5 | Ω | ID=2A, VGS=10V | 5 | |
| VDD 供电电压 推荐值 (supply voltage, recommended) | VDD | 10 | 23 | V | 3 | ||
| VDD 供电电压 极限值 (supply voltage, absolute maximum) | VDD | 30 | V | 3 | |||
| FB 引脚输入电压 推荐值 (FB pin input voltage, recommended) | VFB | 0 | 5 | V | 3 | ||
| FB 引脚输入电压 极限值 (FB pin input voltage, absolute maximum) | VFB | -0.3 | 6 | V | 3 | ||
| CS 引脚输入电压 极限值 (CS pin input voltage, absolute maximum) | VCS | -0.3 | 5 | V | 3 | ||
| 工作结点温度 (operating junction temperature) | TJ | -40 | 150 | °C | 3 | ||
| 存储温度范围 (storage temperature) | TSTG | -40 | 150 | °C | 3 | ||
| 工作环境温度 (operating ambient temperature) | TA | -40 | 85 | °C | 3 | ||
| 焊接温度 (soldering temperature) | TL | 260 | °C | 10 s | 3 |
CAD (KiCad official)
- Symbol:
TMF0265 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
tmf0265-etched.step/tmf0265-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmf0265.step/tmf0265.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM Shenzhen Titan Micro Elec datasheet (11 pp, sha256
4a7d123e1200ebe7, retrieved 2026-10-16, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).