3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F1825T-I/ST
Microchip Tech · MICROCHIP · TSSOP-14
PIC16F1825T-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; the PIC16F1825 operates from 1.8 V to 5.5 V (PIC16LF1825 is 1.8 V to 3.6 V). |
| 2 | RA5 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries CLKIN/OSC1, T1OSI, T1CKI, P2A and CCP2, with CCP2 selectable on this pin via APFCON1. |
| 3 | RA4 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN3, CPS3, OSC2/CLKOUT, T1OSO, CLKR, SDO1 and P2B, with T1G and SDO1 selectable on this pin via APFCON registers. |
| 4 | RA3 | input | Input-only pin (TTL) that serves as MCLR/VPP; when MCLR is enabled it has an internal weak pull-up to VDD, and VPP is the high-voltage programming input. |
| 5 | RC5 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries P1A, CCP1, RX/DT and MDCIN2, with RX/DT selectable on this pin via APFCON0. |
| 6 | RC4 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries C2OUT, SRNQ, P1B, TX/CK and MDOUT, with TX/CK selectable on this pin via APFCON0. |
| 7 | RC3 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN7, CPS7, C12IN3-, P2A, CCP2, P1C, SS1 and MDMIN, with CCP2, P2A, P1C and SS1 selectable on this pin via APFCON registers. |
| 8 | RC2 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN6, CPS6, C12IN2-, P1D, P2B, SDO1 and MDCIN1, with P1D, P2B and SDO1 selectable on this pin via APFCON registers. |
| 9 | RC1 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN5, CPS5, C12IN1-, SDA, SDI, P1C and CCP4 (I2C SDA is open drain). |
| 10 | RC0 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN4, CPS4, C2IN+, SCL/SCK (I2C SCL is open drain) and P1D. |
| 11 | RA2 | bidirectional | General purpose I/O (ST input, CMOS output) that also carries AN2, CPS2, T0CKI, INT, C1OUT, SRQ, CCP3 and FLT0. |
| 12 | RA1 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN1, CPS1, C12IN0-, VREF+, SRI, RX/DT, ICSPCLK and ICDCLK, with RX/DT selectable on this pin via APFCON0. |
| 13 | RA0 | bidirectional | General purpose I/O (TTL input, CMOS output) that also carries AN0, CPS0, C1IN+, VREF-/DACOUT, TX/CK, ICSPDAT and ICDDAT, with TX/CK selectable on this pin via APFCON0. |
| 14 | VSS | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 334 | |||
| Storage temperature | -65 | 150 | °C | 334 | |||
| Voltage on VDD with respect to VSS, PIC16F1825/9 | VDD | -0.3 | 6.5 | V | with respect to VSS | 334 | |
| Voltage on MCLR with respect to VSS | -0.3 | 9 | V | with respect to VSS | 334 | ||
| Maximum current out of VSS pin | 85 | mA | -40°C <= TA <= +85°C for industrial | 334 | |||
| Maximum current into VDD pin | 80 | mA | -40°C <= TA <= +85°C for industrial | 334 | |||
| Clamp current, IK | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 334 | ||
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial | 337 | |
| Supply voltage VDD (PIC16F1825/9) | VDD | 1.8 | 5.5 | V | FOSC <= 16 MHz | 337 | |
| Supply voltage VDD (PIC16F1825/9) | VDD | 2.5 | 5.5 | V | FOSC <= 32 MHz (PLL required, Note 2) | 337 | |
| RAM Data Retention Voltage (PIC16F1825/9) | VDR | 1.7 | V | Device in Sleep mode | 337 | ||
| Fixed Voltage Reference Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, 2.048V with VDD 2.5V; 4.096V with VDD 4.75V | 337 | |
| Fixed Voltage Reference Voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, 2.048V with VDD 2.5V; 4.096V with VDD 4.75V | 337 | |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 7.1 Power-on Reset (POR) | 337 | ||
| Input Low Voltage, I/O port with TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 344 | ||
| Input Low Voltage, I/O port with SMBus levels | VIL | 0.8 | V | 2.7V <= VDD <= 5.5V | 344 | ||
| Input High Voltage, I/O port with TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 344 | ||
| Input High Voltage, I/O port with SMBus levels | VIH | 2.1 | V | 2.7V <= VDD <= 5.5V | 344 | ||
| Input Leakage Current, I/O ports | IIL | -5 | 5 | nA | VSS <= VPIN <= VDD, pin at high-impedance at 85°C | 344 | |
| Input Leakage Current, MCLR | IIL | -200 | 200 | nA | VSS <= VPIN <= VDD at 85°C | 344 | |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 344 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 344 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 344 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 344 | ||
| Capacitive loading, all I/O pins | CIO | 50 | pF | 344 | |||
| Voltage on MCLR/VPP/RA5 pin (high voltage programming) | VIHH | 8 | 9 | V | Note 3, 4 | 345 | |
| Programming/Erase Current on VPP, High Voltage Programming | IDDVPP | 10 | mA | 345 | |||
| VDD for Bulk Erase | VBE | 2.7 | V | 345 | |||
| Data EEPROM Byte Endurance | ED | 100 | K E/W | -40°C to +85°C | 345 | ||
| Erase/Write Cycle Time (data EEPROM) | TDEW | 4 | 5 | ms | 345 | ||
| Number of Total Erase/Write Cycles before Refresh | TREF | 1 | 10 | M E/W | -40°C to +85°C | 345 | |
| Program Flash Cell Endurance | EP | 10 | K E/W | -40°C to +85°C (Self-write and Block Erase) | 345 | ||
| Self-timed Write Cycle Time (program flash) | TIW | 2 | 2.5 | ms | 345 | ||
| External Clock Frequency, EC high power mode | FOSC | 32 | MHz | EC Oscillator mode (high) | 348 | ||
| Oscillator Frequency, HS mode | FOSC | 1 | 20 | MHz | HS Oscillator mode, VDD > 2.7V | 348 | |
| Oscillator Frequency, XT mode | FOSC | 0.1 | 4 | MHz | XT Oscillator mode | 348 | |
| Instruction Cycle Time | TCY | 125 | ns | TCY = FOSC/4 | 348 | ||
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -5 | 5 | % | -40°C <= TA <= +125°C | 349 | |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -2 | 2 | % | 0°C <= TA <= +60°C, VDD >= 2.5V | 349 | |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -3 | 3 | % | 60°C <= TA <= +85°C, VDD >= 2.5V | 349 | |
| Internal LFINTOSC Frequency tolerance | LFOSC | -25 | 25 | % | -40°C <= TA <= +125°C | 349 | |
| Oscillator Frequency Range (PLL input) | F10 | 4 | 8 | MHz | 349 | ||
| On-Chip VCO System Frequency (PLL) | F11 | 16 | 32 | MHz | 349 | ||
| PLL Start-up Time (Lock Time) | F12 | 2 | ms | 349 | |||
| CLKOUT Stability (Jitter) | F13 | -0.25 | 0.25 | % | 349 | ||
| Power-down Base Current (IPD), 85°C | IPD | 17.8 | 37 | µA | 1.8V; WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 342 | |
| Power-down Base Current (IPD), 85°C | IPD | 20.5 | 42 | µA | 3.0V; WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 342 | |
| Power-down Base Current (IPD), 85°C | IPD | 21.7 | 45 | µA | 5.0V; WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive | 342 | |
| Thermal Resistance Junction to Ambient, 14-pin TSSOP | θJA | 100 | °C/W | 14-pin TSSOP package | 346 | ||
| Thermal Resistance Junction to Case, 14-pin TSSOP | θJC | 24.4 | °C/W | 14-pin TSSOP package | 346 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 346 | |||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 337 | |||
| Power-on Reset Rearm Voltage (PIC16F1825/9) | VPORR | 1.5 | V | Device in Sleep mode | 337 | ||
| Temperature Coefficient, Fixed Voltage Reference | TCVFVR | -130 | ppm/°C | 337 | |||
| Line Regulation, Fixed Voltage Reference | VFVR/VIN | 0.27 | %/V | 337 | |||
| Programming/Erase Current on VPP, Low Voltage Programming | IPPPGM | 1 | mA | 345 | |||
| Programming/Erase Current on VDD, High or Low Voltage Programming | IDDPGM | 5 | mA | 345 |
CAD (KiCad official)
- Symbol:
PIC16F1825T-I - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
pic16f1825t-i-etched.step/pic16f1825t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1825t-i.step/pic16f1825t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (436 pp, sha256
7e7b5a9f96522d80, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F1825T-I/ST. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F1825T-I/ML