component
XC081S051
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC081S051
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC081S051 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Power supply input (3.3 V to 5.25 V), which also serves as the ADC reference; VA must be set greater than or equal to the maximum VIN input signal to avoid saturating the maximum conversion code. |
| 2 | GND | power_in | Analog input signal ground; all analog and digital signals are referenced to this pin. |
| 3 | VIN | power_in | Single-ended analog signal input with a range of 0 V to VA. |
| 4 | SCLK | input | Serial clock input that directly controls the conversion and readout process; a conversion starts on CS falling with SCLK, and the 12th falling SCLK edge ends the cycle. |
| 5 | SDATA | output | Serial data output that delivers the 8-bit result MSB first after three leading zeros and enters tri-state after the 12th falling SCLK edge. |
| 6 | CS | input | Active-low chip select that starts a conversion on its falling edge; it should be raised after 12 SCLK cycles, and raising it before 10 SCLK cycles aborts the conversion with no valid data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage (VA) | VA | 3.3 | 5.25 | V | Single power supply, printed as 3.3 V to 5.25 V | 1 | |
| Operating temperature range | -40 | 85 | °C | Printed as operating temperature range -40 °C to 85 °C | 1 | ||
| Sampling rate | 200 | 500 | KSPS | 1 | |||
| Integral nonlinearity (INL) | INL | -0.5 | 0.5 | LSB | 1 | ||
| Differential nonlinearity (DNL) | DNL | -0.5 | 0.5 | LSB | 2 | ||
| Power consumption (typical) | 3.6 | mW | VA = 5 V, 500 KSPS | 1 | |||
| Power consumption (typical) | 1.4 | mW | VA = 3.3 V, 500 KSPS | 1 | |||
| Signal-to-noise ratio (SNR) | SNR | 49.4 | dB | 100 KHz input | 2 | ||
| Total harmonic distortion (THD) | THD | -67 | dB | 100 KHz input | 2 |
CAD (KiCad official)
- Symbol:
XC081S051 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc081s051-etched.step/xc081s051-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc081s051.step/xc081s051.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (4 pp, sha256
f712f5fec5d47ce5, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).