3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownOPA725AIDBVT
Texas Instruments · Operational Amplifier · SOT-23-5
OPA725AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; for light loads (RL > 100kΩ) it swings to within 150mV of the supply rails, and output current is specified at 40mA when VS − VOUT < 1V. |
| 2 | V- | power_in | Negative power supply; the device is specified for 4V to 12V single supply or ±2V to ±6V dual supply, with an operating voltage range of 3.5V to 13.2V. |
| 3 | +IN | input | Non-inverting input; the input common-mode range extends from V− to (V+) − 2V, with excellent CMRR from V− to (V+) − 3V. |
| 4 | -IN | input | Inverting input; input terminals are diode-clamped to the supply rails and signals beyond 0.5V past the rails should be limited to 10mA or less. |
| 5 | V+ | power_in | Positive power supply; the absolute maximum supply voltage is +13.2V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (OPA725) | VOS | 1.2 | 3 | mV | VS = ±6V, VCM = 0V | 4 | |
| Power Supply Rejection Ratio | PSRR | 30 | 100 | µV/V | VS = ±2V to ±6V, VCM = V− | 4 | |
| PSRR over temperature | PSRR | 150 | µV/V | VS = ±2V to ±6V, VCM = V−, over temperature | 4 | ||
| Input Bias Current | IB | 30 | 200 | pA | 4 | ||
| Input Offset Current | IOS | 10 | 50 | pA | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 88 | 94 | dB | (V−) ≤ VCM ≤ (V+) − 2V | 4 | |
| CMRR over temperature | CMRR | 84 | dB | (V−) ≤ VCM ≤ (V+) − 2V | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 94 | 100 | dB | (V−) ≤ VCM ≤ (V+) − 3V | 4 | |
| Open-Loop Voltage Gain (OPA725) | AOL | 110 | 120 | dB | RL = 100kΩ, 0.15V < VO < (V+) − 0.15V | 4 | |
| AOL over temperature | AOL | 100 | dB | RL = 100kΩ, 0.15V < VO < (V+) − 0.15V | 4 | ||
| Open-Loop Voltage Gain (OPA725) | AOL | 106 | 116 | dB | RL = 1kΩ, 0.25V < VO < (V+) − 0.25V | 4 | |
| AOL over temperature | AOL | 96 | dB | RL = 1kΩ, 0.25V < VO < (V+) − 0.25V | 4 | ||
| Output Swing from Rail (OPA725) | 100 | 150 | mV | RL = 100kΩ, AOL > 110dB | 5 | ||
| Output Swing from Rail over temperature | 150 | mV | RL = 100kΩ, AOL > 100dB | 5 | |||
| Output Swing from Rail (OPA725) | 200 | 250 | mV | RL = 1kΩ, AOL > 106dB | 5 | ||
| Output Swing from Rail over temperature | 250 | mV | RL = 1kΩ, AOL > 96dB | 5 | |||
| Input Disable Current | 5 | µA | Ref Pin = Enable Pin = V− | 5 | |||
| Shutdown Quiescent Current (per amplifier) | IQSD | 6 | 15 | µA | 5 | ||
| Specified Voltage Range | VS | 4 | 12 | V | 5 | ||
| Operating Voltage Range | VS | 3.5 | 13.2 | V | 5 | ||
| Quiescent Current (per amplifier) | IQ | 4.3 | 5.5 | mA | IO = 0 | 5 | |
| Quiescent Current over temperature | IQ | 6 | mA | Over Temperature | 5 | ||
| Specified Temperature Range | -40 | 125 | °C | 5 | |||
| Operating Temperature Range | -55 | 125 | °C | 5 | |||
| Storage Temperature Range | -55 | 150 | °C | 5 | |||
| Supply Voltage | 13.2 | V | 2 | ||||
| Signal Input Terminal Current | -10 | 10 | mA | Input terminals diode-clamped to supply rails | 2 | ||
| Operating Temperature | -55 | 125 | °C | 2 | |||
| Storage Temperature | -55 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature | 300 | °C | soldering, 10s | 2 | |||
| ESD Rating (Human Body Model) | 1000 | V | 2 | ||||
| Thermal Resistance, SOT23-5 | θJA | 200 | °C/W | SOT23-5 | 5 | ||
| Offset Voltage Drift | dVOS/dT | 4 | µV/°C | 4 | |||
| Channel Separation, DC | 1 | µV/V | 4 | ||||
| Input Voltage Noise, 0.1Hz to 10Hz | en | 10 | µVPP | VS = ±6V, VCM = 0V | 4 | ||
| Input Voltage Noise Density, f = 10kHz | en | 10 | nV/√Hz | VS = ±6V, VCM = 0V | 4 | ||
| Input Voltage Noise Density, f = 100kHz | en | 6 | nV/√Hz | VS = ±6V, VCM = 0V | 4 | ||
| Input Current Noise Density, f = 1kHz | in | 2.5 | fA/√Hz | VS = ±6V, VCM = 0V | 4 | ||
| Gain-Bandwidth Product | GBW | 20 | MHz | CL = 20pF | 4 | ||
| Slew Rate | SR | 30 | V/µs | G = +1 | 4 | ||
| Settling Time, 0.1% | tS | 350 | ns | VS = ±6V, 5V Step, G = +1 | 4 | ||
| Settling Time, 0.01% | tS | 450 | ns | VS = ±6V, 5V Step, G = +1 | 4 | ||
| Overload Recovery Time | 50 | ns | VIN • Gain > VS | 4 | |||
| Total Harmonic Distortion + Noise | THD+N | 0.0003 | % | VS = ±6V, VOUT = 2VRMS, RL = 600Ω, G = +1, f = 1kHz | 4 | ||
| Output Current | IOUT | 40 | mA | VS − VOUT < 1V | 5 | ||
| Short-Circuit Current | ISC | 55 | mA | ± | 5 | ||
| Open-Loop Output Impedance | 40 | Ω | f = 1MHz, IO = 0 | 5 | |||
| Shutdown turn-off time | tOFF | 5 | µs | 5 | |||
| Shutdown turn-on time | tON | 30 | µs | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
OPA725AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa725aidbvt-etched.step/opa725aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa725aidbvt.step/opa725aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
fe09d4471dd51e5b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).