3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F24J50-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC18F24J50-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input, active-low Reset to the device, Schmitt Trigger input. |
| 2 | RA0/AN0/C1INA/ULPWU/RP0 | bidirectional | PORTA bit 0 digital I/O, also Analog Input 0, Comparator 1 Input A, Ultra Low-Power Wake-up input and remappable peripheral pin RP0. |
| 3 | RA1/AN1/C2INA/RP1 | bidirectional | PORTA bit 1 digital I/O, also Analog Input 1, Comparator 2 Input A and remappable peripheral pin RP1. |
| 4 | RA2/AN2/VREF-/CVREF/C2INB | bidirectional | PORTA bit 2 digital I/O, also Analog Input 2, A/D reference voltage (low) input, comparator reference voltage output and Comparator 2 Input B. |
| 5 | RA3/AN3/VREF+/C1INB | bidirectional | PORTA bit 3 digital I/O, also Analog Input 3, A/D reference voltage (high) input and Comparator 1 Input B. |
| 6 | VDDCORE/VCAP | power_in | Core logic supply (VDDCORE, regulator disabled on LF parts) or external filter capacitor connection (VCAP, regulator enabled on F parts). |
| 7 | RA5/AN4/SS1/HLVDIN/RCV/RP2 | bidirectional | PORTA bit 5 digital I/O, also Analog Input 4, SPI slave select input, Low-Voltage Detect input, external USB transceiver RCV input and remappable peripheral pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST in RC mode, CMOS otherwise), or RA7 digital I/O when not used for the clock function. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (1/4 the OSC1 frequency in RC mode), or RA6 digital I/O when not used for the clock function. |
| 11 | RC0/T1OSO/T1CKI/RP11 | bidirectional | PORTC bit 0 digital I/O, also Timer1 oscillator output, Timer1 external digital clock input and remappable peripheral pin RP11. |
| 12 | RC1/T1OSI/UOE/RP12 | bidirectional | PORTC bit 1 digital I/O, also Timer1 oscillator input, external USB transceiver NOE output and remappable peripheral pin RP12. |
| 13 | RC2/AN11/CTPLS/RP13 | bidirectional | PORTC bit 2 digital I/O, also Analog Input 11, CTMU pulse generator output and remappable peripheral pin RP13. |
| 14 | VUSB | power_in | USB voltage input pin. |
| 15 | RC4/D-/VM | bidirectional | Digital input RC4, USB bus minus line input/output, or external USB transceiver VM input. |
| 16 | RC5/D+/VP | bidirectional | Digital input RC5, USB bus plus line input/output, or external USB transceiver VP input. |
| 17 | RC6/TX1/CK1/RP17 | bidirectional | PORTC bit 6 digital I/O, also EUSART1 asynchronous transmit, EUSART1 synchronous clock and remappable peripheral pin RP17. |
| 18 | RC7/RX1/DT1/SDO1/RP18 | bidirectional | PORTC bit 7 digital I/O, also EUSART1 receive/data, SPI data output and remappable peripheral pin RP18. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0/AN12/INT0/RP3 | bidirectional | PORTB bit 0 digital I/O with software-programmable weak pull-up, also Analog Input 12, External Interrupt 0 and remappable peripheral pin RP3. |
| 22 | RB1/AN10/RTCC/RP4 | bidirectional | PORTB bit 1 digital I/O with weak pull-up, also Analog Input 10, RTCC output and remappable peripheral pin RP4. |
| 23 | RB2/AN8/CTED1/VMO/REFO/RP5 | bidirectional | PORTB bit 2 digital I/O with weak pull-up, also Analog Input 8, CTMU Edge 1 input, USB transceiver D- data output, reference output clock and remappable pin RP5. |
| 24 | RB3/AN9/CTED2/VPO/RP6 | bidirectional | PORTB bit 3 digital I/O with weak pull-up, also Analog Input 9, CTMU Edge 2 input, USB transceiver D+ data output and remappable pin RP6. |
| 25 | RB4/KBI0/SCK1/SCL1/RP7 | bidirectional | PORTB bit 4 digital I/O with weak pull-up, also interrupt-on-change, SPI clock, I2C clock and remappable pin RP7. |
| 26 | RB5/KBI1/SDI1/SDA1/RP8 | bidirectional | PORTB bit 5 digital I/O with weak pull-up, also interrupt-on-change, SPI data input, I2C data and remappable pin RP8. |
| 27 | RB6/KBI2/PGC/RP9 | bidirectional | PORTB bit 6 digital I/O with weak pull-up, also interrupt-on-change, ICSP clock input and remappable pin RP9. |
| 28 | RB7/KBI3/PGD/RP10 | bidirectional | PORTB bit 7 digital I/O with weak pull-up, also interrupt-on-change, In-Circuit Debugger/ICSP programming data pin and remappable pin RP10. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage on VDD (F devices, regulator enabled) | VDD | 2.15 | 3.6 | V | Parts designated 'F' run from 2.15V-3.6V on VDD, with VDDCORE connected to VSS through a low-ESR capacitor | 12 | |
| Operating frequency | 0 | 48 | MHz | PIC18F24J50, DC - 48 MHz | 13 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | the 10-bit time base. 2: These pins are remappable. | 253 |
CAD (KiCad official)
- Symbol:
PIC18F24J50-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pic18f24j50-i-etched.step/pic18f24j50-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f24j50-i.step/pic18f24j50-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (562 pp, sha256
4ea9417d298a28c1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC18F24J50-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC18F24J50-I/ML