component
SN65LVDS22PWR
Public Made by Adomby adom
Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65LVDS22PWR
Texas Instruments · LVDS ICs · TSSOP-16
SN65LVDS22PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Channel 1 receiver differential input B (bus pin, ESD rated 12 kV Class 3A); the receiver threshold is ±100 mV with a fail-safe output high when the pair is open-circuited. |
| 2 | 1A | input | Channel 1 receiver differential input A (bus pin, ESD rated 12 kV Class 3A); it forms a pair with 1B and must stay within the common-mode range set by VCC−0.8 V with |
| 3 | S0 | input | Multiplexer select input S0 that routes receiver outputs to drivers; VIH is 2 V min and VIL is 0.8 V max, with 1.6 ns setup and 1 ns hold relative to the bus inputs. |
| 4 | 1DE | input | Channel 1 driver enable input; logic levels are VIH 2 V min and VIL 0.8 V max, and the input is 5 V tolerant (absolute maximum 6 V). |
| 5 | S1 | input | Multiplexer select input S1 that routes receiver outputs to drivers; VIH is 2 V min and VIL is 0.8 V max, with 1.6 ns setup and 1 ns hold relative to the bus inputs. |
| 6 | 2A | input | Channel 2 receiver differential input A (bus pin, ESD rated 12 kV Class 3A); it forms a pair with 2B and is limited to the same |
| 7 | 2B | input | Channel 2 receiver differential input B (bus pin, ESD rated 12 kV Class 3A); the receiver threshold is ±100 mV with a fail-safe output high when the pair is open-circuited. |
| 8 | GND | power_in | Ground return for the device, referenced to the network ground. |
| 9 | GND | power_in | Ground return for the device, referenced to the network ground. |
| 10 | 2Y | output | Channel 2 LVDS driver output Y (differential pair with 2Z); VOD is 247 mV min to 454 mV max into a 100 Ω load for the SN65LVDS22. |
| 11 | 2Z | output | Channel 2 LVDS driver output Z (differential pair with 2Y); VOD is 247 mV min to 454 mV max into a 100 Ω load for the SN65LVDS22. |
| 12 | 2DE | input | Channel 2 driver enable input; logic levels are VIH 2 V min and VIL 0.8 V max, and the input is 5 V tolerant (absolute maximum 6 V). |
| 13 | 1Z | output | Channel 1 LVDS driver output Z (differential pair with 1Y); VOD is 247 mV min to 454 mV max into a 100 Ω load for the SN65LVDS22. |
| 14 | 1Y | output | Channel 1 LVDS driver output Y (differential pair with 1Z); VOD is 247 mV min to 454 mV max into a 100 Ω load for the SN65LVDS22. |
| 15 | VCC | power_in | Single 3.3 V supply pin; recommended range 3 V to 3.6 V, absolute maximum 4 V. |
| 16 | VCC | power_in | Single 3.3 V supply pin; recommended range 3 V to 3.6 V, absolute maximum 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN65LVDS22PWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds22pwr-etched.step/sn65lvds22pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds22pwr.step/sn65lvds22pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
fee3495d3434ed9e, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).