Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3232ECDW

Texas Instruments · Pre-ordered Chips · SOIC-16-300mil

MAX3232ECDW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive lead of the C1 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V per Table 9-1.
2 V+ power_out Positive charge-pump output for the storage capacitor only, not for an external load.
3 C1- passive Negative lead of the C1 charge-pump capacitor.
4 C2+ passive Positive lead of the C2 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V per Table 9-1.
5 C2- passive Negative lead of the C2 charge-pump capacitor.
6 V- power_out Negative charge-pump output for the storage capacitor only, not for an external load.
7 DOUT2 output RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2.
8 RIN2 input RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V.
9 ROUT2 output Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA.
10 DIN2 input Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum.
11 DIN1 input Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum.
12 ROUT1 output Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA.
13 RIN1 input RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V.
14 DOUT1 output RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2.
15 GND power_in Ground reference for the device, which is also the network ground for all voltages.
16 VCC power_in Supply voltage, to be connected to an external 3 V to 5.5 V power supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Supply voltage VCC -0.3 6 V 4
V+ Positive output supply voltage V+ -0.3 7 V 4
V- Negative output supply voltage V- 0.3 -7 V 4
Supply voltage difference V+, V- 13 V 4
Input voltage, drivers VI -0.3 6 V Drivers 4
Input voltage, receivers VI -25 25 V Receivers 4
Output voltage, drivers VO -13.2 13.2 V Drivers 4
Output voltage, receivers VO -0.3 V Receivers; printed maximum is VCC + 0.3 V 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 3 3.3 3.6 V VCC = 3.3 V 4
Supply voltage VCC 4.5 5 5.5 V VCC = 5 V 4
Driver high-level input voltage DIN VIH 2 5.5 V VCC = 3.3 V 4
Driver high-level input voltage DIN VIH 2.4 5.5 V VCC = 5 V 4
Driver low-level input voltage DIN VIL 0 0.8 V 4
Receiver input voltage RIN VI -25 25 V 4
Operating free-air temperature TA 0 70 °C MAX3232EC 5
Supply current ICC 0.3 1 mA No load, VCC = 3.3 V or 5 V 5
High-level output voltage VOH 5 5.4 V DOUT at RL = 3 kΩ to GND, DIN = GND 5
Low-level output voltage VOL -5 -5.4 V DOUT at RL = 3 kΩ to GND, DIN = VCC 5
High-level input current IIH -1 0.01 1 μA VI = VCC 5
Low-level input current IIL -1 0.01 1 μA VI at GND 5
Output resistance rO 300 10 MΩ VCC, V+, and V- = 0 V, VO = ±2 V; printed as 300 Ω min and 10M Ω max 5
High-level output voltage VOL 0.4 V IOL = 1.6 mA 6
Positive-going input threshold voltage VIT+ 1.5 2.4 V VCC = 3.3 V 6
Positive-going input threshold voltage VIT+ 1.8 2.4 V VCC = 5 V 6
Negative-going input threshold voltage VIT- 0.6 1.2 V VCC = 3.3 V 6
Negative-going input threshold voltage VIT- 0.8 1.5 V VCC = 5 V 6
Maximum data rate 150 250 kbit/s RL = 3 kΩ, one DOUT switching, CL = 1000 pF 6
Driver slew rate, transition region SR(tr) 6 30 V/μs RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF 6
Driver slew rate, transition region SR(tr) 4 30 V/μs RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF 6
Driver pulse skew tsk(p) 300 ns RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF 6
Receiver propagation delay time, low- to high-level output tPLH 300 ns CL = 150 pF 6
Receiver propagation delay time, high- to low-level output tPHL 300 ns CL = 150 pF 6
Receiver pulse skew tsk(p) 300 ns 6
Junction-to-ambient thermal resistance (DW) RθJA 72.3 °C/W DW (SOIC) 16-pin package 5
Junction-to-case (top) thermal resistance (DW) RθJCtop 33.5 °C/W DW (SOIC) 16-pin package 5
Junction-to-board thermal resistance (DW) RθJB 37.1 °C/W DW (SOIC) 16-pin package 5
Junction-to-top characterization parameter (DW) ψJT 7.5 °C/W DW (SOIC) 16-pin package 5
Junction-to-board characterization parameter (DW) ψJB 37.1 °C/W DW (SOIC) 16-pin package 5

CAD (KiCad official)

  • Symbol: MAX3232ECDW
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: max3232ecdw-etched.step / max3232ecdw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232ecdw.step / max3232ecdw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 fbc081a3bb4066ba, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF