component
ICW1261A50P1GQ1
Public Made by Adomby adom
ICW Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownICW1261A50P1GQ1
ICW · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3L
ICW1261A50P1GQ1 from ICW, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin; the VOUT potential must not exceed VIN+0.3V to avoid reverse current through the parasitic diodes. |
| 2 | GND | power_in | Ground pin. |
| 3 | VIN | power_in | Power input pin; input voltage range is 2.2V to 60V in operation, with an absolute maximum of 65V (-0.3V to 65V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ICW |
| Package | SOT-89-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(S) | 0.98 | 1.02 | x VOUT(S) | VIN=VOUT(S)+2V, IOUT=1mA | 6 | |
| Dropout Voltage | VDROP | 8 | 16 | mV | VEN=VIN, VOUT(S)=5.0V, IOUT=1mA | 6 | |
| Dropout Voltage | VDROP | 1300 | 1800 | mV | VEN=VIN, VOUT(S)=5.0V, IOUT=150mA | 6 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.01 | 0.02 | %/V | VOUT(S)+2V≤VIN≤60V, IOUT=1mA | 6 | |
| Load Regulation | ΔVOUT | 20 | 40 | mV | VIN=VOUT(S)+2V, 1mA≤IOUT≤150mA, VOUT(S)≤5.3V | 6 | |
| Temperature Stability | -40 | 40 | ppm/℃ | VIN=VOUT(S)+2V, IOUT=10mA, -40℃≤Ta≤125℃ | 6 | ||
| GND Current | IGND | 1 | 2.3 | 3 | uA | VEN=VIN, no load, 3.0≤VOUT(S)≤5.3V | 6 |
| Input Voltage | VIN | 2.2 | 60 | V | 6 | ||
| Maximum Output Current | IOUTMAX | 150 | mA | 6 | |||
| EN H Level Voltage | VENH | 1.5 | 60 | V | 6 | ||
| EN L Level Voltage | VENL | 0 | 0.6 | V | 6 | ||
| EN H Level Current | IENH | -0.1 | 0.1 | uA | VIN=60V, VEN=VIN | 6 | |
| EN L Level Current | IENL | -0.1 | 0.1 | uA | VIN=60V, VEN=0 | 6 | |
| Shutdown Current | ISHUT | 0.1 | 1 | uA | VIN=60V, VEN=0 | 6 | |
| Input Voltage (absolute maximum) | VIN | -0.3 | 65 | V | 5 | ||
| Power Dissipation SOT89-3L | PD | 1000 | mW | SOT89-3L package | 5 | ||
| ESD HBM | ESD HBM | -4000 | 4000 | V | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 125 | ℃ | 5 | ||
| Storage Temperature | Tstg | -40 | 150 | ℃ | 5 | ||
| Current Limit | ILIM | 240 | mA | VEN=VIN=VOUT(S)+2V, VOUT=0.95×VOUT(S) | 6 | ||
| Short Circuit Current | ISHORT | 10 | VIN=VEN=VOUT(S)+2.0V, VOUT=0V | 6 | |||
| Power Supply Rejection Ratio | PSRR | 76 | dB | f=10Hz, IOUT=10mA | 6 | ||
| Power Supply Rejection Ratio | PSRR | 80 | dB | f=100Hz, IOUT=10mA | 6 | ||
| Power Supply Rejection Ratio | PSRR | 63 | dB | f=1kHz, IOUT=10mA | 6 | ||
| Over Temperature Protection | OTP | 165 | ℃ | IOUT=1mA | 6 | ||
| Thermal Resistance Junction-to-Ambient SOT89-3L | RθJA | 100 | ℃/W | SOT89-3L package | 5 |
CAD (KiCad official)
- Symbol:
ICW1261A50P1GQ1 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
icw1261a50p1gq1-etched.step/icw1261a50p1gq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icw1261a50p1gq1.step/icw1261a50p1gq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ICW datasheet (17 pp, sha256
f1eb23ebf35288e2, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).