3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV1811QDBVRQ1
Texas Instruments · IC · SOT-23-5
TLV1811QDBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Push-pull comparator output that can sink and source current, and must never be connected to another output; leave it floating if unused. |
| 2 | V- | power_in | Negative supply voltage (ground), with the supply range VS = (V+)-(V-) of 2.4V to 40V. |
| 3 | IN+ | input | Non-inverting (+) input with a rail-to-rail range from 0.2V below V- to 0.2V above V+. |
| 4 | IN- | input | Inverting (-) input with a rail-to-rail range from 0.2V below V- to 0.2V above V+. |
| 5 | V+ | power_in | Positive supply voltage, with the supply range VS = (V+)-(V-) of 2.4V to 40V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 0.5 | 3 | mV | VS=12V, VCM=VS/2, TA=25°C | 8 |
| Input offset voltage over temperature | VOS | -4 | 4 | mV | TA = -40°C to +125°C | 8 | |
| Quiescent current, output low, 25°C | IQ | 6 | 7.5 | µA | No load, Output Low, TA = 25°C, TLV1811-Q1 only | 8 | |
| Quiescent current, output low, full temp | IQ | 8.5 | µA | No load, Output Low, TA = -40°C to +125°C, TLV1811-Q1 only | 8 | ||
| Quiescent current, output high, 25°C | IQ | 8 | 10 | µA | No load, Output High, TA = 25°C, TLV1811-Q1 only | 8 | |
| Quiescent current, output high, full temp | IQ | 11 | µA | No load, Output High, TA = -40°C to +125°C, TLV1811-Q1 only | 8 | ||
| Input bias current over temperature | IB | -1.2 | 1.2 | nA | TA = -40°C to +125°C | 8 | |
| Common-mode voltage range | VCM-Range | -0.2 | 0.2 | V | VS = 2.4V to 40V, TA = -40°C to +125°C; (V-), 0.2 to (V+) + 0.2 | 8 | |
| Output swing from (V-) | VOL | 250 | mV | ISINK = 4mA, TA = -40°C to +125°C | 8 | ||
| Output swing from (V+), push-pull | VOH | 250 | mV | ISOURCE = 4mA, TA = -40°C to +125°C | 8 | ||
| Short-circuit current, sinking | IOL | 15 | 30 | mA | Sinking | 8 | |
| Short-circuit current, sourcing | IOH | 15 | 30 | mA | Sourcing (for Push-Pull only) | 8 | |
| Input offset voltage drift | dVIO/dT | 1.2 | µV/°C | TA = -40°C to +125°C | 8 | ||
| Power supply rejection ratio | PSRR | 100 | dB | VS = 2.4V to 40V, VCM = (V-) | 8 | ||
| Power-on reset voltage | VPOR | 1.7 | V | 8 | |||
| Input bias current | IB | 150 | fA | 8 | |||
| Input offset current | IOS | 10 | fA | 8 | |||
| Input capacitance, differential | CID | 2 | pF | 8 | |||
| Input capacitance, common mode | CIC | 8 | pF | 8 | |||
| Propagation delay high-to-low | TPD-HL | 900 | ns | VOD = 10mV, CL = 50pF | 9 | ||
| Propagation delay high-to-low | TPD-HL | 450 | ns | VOD = 100mV, CL = 50pF | 9 | ||
| Propagation delay low-to-high, push-pull | TPD-LH | 900 | ns | VOD = 10mV, CL = 50pF | 9 | ||
| Propagation delay low-to-high, push-pull | TPD-LH | 420 | ns | VOD = 100mV, CL = 50pF | 9 | ||
| Output rise time 20% to 80% | TRISE | 15 | ns | CL = 50pF | 9 | ||
| Output fall time 80% to 20% | TFALL | 15 | ns | CL = 50pF | 9 | ||
| Toggle frequency | FTOGGLE | 500 | kHz | VID = 100mV, CL = 50pF | 9 | ||
| Power on-time | PON | 200 | µs | 9 | |||
| Supply voltage (abs max) | VS | -0.3 | 42 | V | VS = (V+), (V-) | 6 | |
| Input pins voltage from (V-) | -0.3 | 0.3 | V | IN+, IN- from (V-); -0.3 to (V+) + 0.3 | 6 | ||
| Current into input pins | -10 | 10 | mA | IN+, IN- | 6 | ||
| Output voltage push-pull from (V-) | -0.3 | 0.3 | V | Push-Pull; -0.3 to (V+) + 0.3 | 6 | ||
| Output current | -10 | 10 | mA | 6 | |||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, AEC Q100-002 | 6 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged-device model, AEC Q100-0111 | 6 | |
| Supply voltage | VS | 2.4 | 40 | V | VS = (V+), (V-) | 6 | |
| Input voltage range | -0.2 | 0.2 | V | From (V-): -0.2 to (V+) + 0.2 | 6 | ||
| Output voltage range push-pull | -0.2 | 0.2 | V | From (V-), Push Pull: -0.2 to (V+) + 0.2 | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 203.4 | °C/W | DBV (SOT-23), 5 pins | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 105.4 | °C/W | DBV (SOT-23), 5 pins | 7 | ||
| Junction-to-board thermal resistance | RθJB | 106.6 | °C/W | DBV (SOT-23), 5 pins | 7 | ||
| Junction-to-top characterization parameter | ψJT | 54 | °C/W | DBV (SOT-23), 5 pins | 7 | ||
| Junction-to-board characterization parameter | ψJB | 106 | °C/W | DBV (SOT-23), 5 pins | 7 |
CAD (KiCad official)
- Symbol:
TLV1811QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tlv1811qdbvrq1-etched.step/tlv1811qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv1811qdbvrq1.step/tlv1811qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (69 pp, sha256
7f5bec9789316f62, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).