3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX6173BASA+T
Maxim Integrated · Voltage References · SOP-8
MAX6173BASA+T from Maxim Integrated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I.C. | unconnected | Internally connected pin that must not be connected externally. |
| 2 | IN | power_in | Positive power-supply input; the datasheet specifies a supply range of 4.5V to 40V for the MAX6173 (VIN must be at least VOUT + 2V). |
| 3 | TEMP | output | Temperature-proportional output voltage that follows die temperature (570mV typical at 25°C for the MAX6173, 1.9mV/°C temperature coefficient). |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | TRIM | input | Output voltage trim input; connect to the center of a divider between OUT and GND for trimming, or leave unconnected to use the preset output voltage. |
| 6 | OUT | power_out | Precision reference output voltage (2.5V for the MAX6173); sources up to 30mA and sinks 2mA, with short-circuit current limited to 60mA to GND. |
| 7 | N.C. | unconnected | No connection; not internally connected. |
| 8 | I.C. | unconnected | Internally connected pin that must not be connected externally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 2.4975 | 2.5 | 2.5025 | V | MAX6173B (0.1%); No load, TA = +25°C | 3 |
| Output Adjustment Range | ∆VTRIM | -3 | 3 | % | RPOT = 10kΩ | 3 | |
| Output-Voltage Temperature Coefficient | TCVOUT | 3 | 10 | ppm/°C | MAX6173BASA; TA = -40°C to +125°C | 3 | |
| Line Regulation | DVOUT/DVIN | 0.6 | 5 | ppm/V | 4.5V ≤ VIN ≤ 40V; TA = +25°C | 3 | |
| Line Regulation | DVOUT/DVIN | 0.8 | 10 | ppm/V | 4.5V ≤ VIN ≤ 40V; TA = -40°C to +125°C | 3 | |
| Load Regulation Sourcing | DVOUT/DIOUT | 2 | 10 | ppm/mA | Sourcing: 0 ≤ IOUT ≤ 10mA; TA = +25°C | 3 | |
| Load Regulation Sourcing | DVOUT/DIOUT | 2 | 15 | ppm/mA | Sourcing: 0 ≤ IOUT ≤ 10mA; TA = -40°C to +125°C | 3 | |
| Load Regulation Sinking | DVOUT/DIOUT | 50 | 500 | ppm/mA | Sinking: -0.6mA ≤ IOUT ≤ 0; TA = +25°C | 3 | |
| Load Regulation Sinking | DVOUT/DIOUT | 90 | 900 | ppm/mA | Sinking: -0.6mA ≤ IOUT ≤ 0; TA = -40°C to +125°C | 3 | |
| Supply Voltage Range | VIN | 4.5 | 40 | V | Guaranteed by line regulation test | 3 | |
| Quiescent Supply Current | IIN | 300 | 450 | µA | No load; TA = +25°C | 3 | |
| Quiescent Supply Current | IIN | 600 | µA | No load; TA = -40°C to +125°C | 3 | ||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| IN to GND voltage | IN | -0.3 | 42 | V | Referenced to GND | 2 | |
| OUT, TRIM, TEMP to GND voltage | OUT, TRIM, TEMP | -0.3 | V | Referenced to GND; upper limit VIN + 0.3V | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | Soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | Reflow | 2 | |||
| Output Short-Circuit Current | ISC | 60 | mA | OUT shorted to GND | 3 | ||
| Output Short-Circuit Current | ISC | 3 | mA | OUT shorted to IN | 3 | ||
| Temperature Hysteresis | DVOUT/cycle | 120 | ppm | Cycle | 3 | ||
| Long-Term Stability | DVOUT/time | 50 | ppm | 1000 hours at TA = +25°C | 3 | ||
| Noise Voltage | eOUT | 3.8 | µVP-P | f = 0.1Hz to 10Hz | 3 | ||
| Noise Voltage | eOUT | 6.8 | µVRMS | f = 10Hz to 1kHz | 3 | ||
| Turn-On Settling Time | tR | 150 | µs | To VOUT = 0.1% of final value, COUT = 50pF | 3 | ||
| TEMP Output Voltage | VTEMP | 570 | mV | 3 | |||
| TEMP Temperature Coefficient | TCTEMP | 1.9 | mV/°C | 3 | |||
| Thermal Resistance Junction to Ambient, multi-layer board | θJA | 132 | °C/W | Multi-layer board, JEDEC JESD51-7 four-layer board | 2 | ||
| Thermal Resistance Junction to Case, multi-layer board | θJC | 38 | °C/W | Multi-layer board | 2 | ||
| Thermal Resistance Junction to Ambient, single-layer board | θJA | 170 | °C/W | Single-layer board | 2 | ||
| Thermal Resistance Junction to Case, single-layer board | θJC | 40 | °C/W | Single-layer board | 2 |
CAD (KiCad official)
- Symbol:
MAX6173BASA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max6173basa-t-etched.step/max6173basa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6173basa-t.step/max6173basa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (20 pp, sha256
9fc116433955c555, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).