Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS560430YFQDBVRQ1

Texas Instruments · DC-DC Converters · SOT-23-6

TPS560430YFQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB output Bootstrap capacitor connection for high-side FET driver; connect a 100nF capacitor from this pin to the SW pin for stable gate drive voltage.
2 GND power_in Power ground terminal connected to low-side FET source internally; connect to system ground and ground side of input and output capacitors with shortest possible trace.
3 FB input Feedback input to converter; connect resistor divider to set output voltage and never short this terminal to ground during operation.
4 EN input Precision enable input; voltage above 1.36V enables converter, below 0.95V disables converter, do not float, can tie to VIN for self-startup.
5 VIN power_in Supply input terminal to internal bias LDO and high-side FET; connect to input supply and input bypass capacitors directly connected to this pin and GND.
6 SW output Switching output of converter internally connected to source of high-side FET and drain of low-side FET; connect to power inductor with minimal trace length.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage operation (VIN pin) VIN 4 36 V 5
VIN UVLO rising threshold VIN_UVLO 3.55 3.75 4 V Rising threshold 5
VIN UVLO falling threshold VIN_UVLO 3.25 3.45 3.65 V Falling threshold 5
Enable rising threshold voltage VEN_H 1.1 1.23 1.36 V 5
Enable falling threshold voltage VEN_L 0.95 1.1 1.22 V 5
Shutdown current ISHDN 3 10 µA VEN = 0 V 5
Leakage current at EN pin IEN 10 200 nA VEN = 3.3 V 5
Reference voltage VREF 0.995 1 1.005 V TJ = 25 °C 5
Reference voltage VREF 0.985 1 1.015 V TJ = –40 °C to 125 °C 5
Leakage current at FB pin IFB 0.2 50 nA VFB = 1.2 V 5
Peak inductor current limit IHS_LIMIT 0.8 1.1 1.4 A 5
Valley inductor current limit ILS_LIMIT 0.62 0.8 0.98 A 5
Negative current limit (FPWM version) ILS_NEG -0.7 -0.5 -0.3 A FPWM version 5
Oscillator frequency, 2.1-MHz version fSW 1.785 2.1 2.415 MHz 2.1-MHz version 6
Input voltage (VIN to GND) VIN 4 36 V 4
EN pin voltage EN 0 V 4
FB pin voltage FB 0 4.5 V 4
Output voltage VOUT 1 V 4
Output current IOUT 0 600 mA 4
Operating junction temperature range TJ -40 125 °C 4
VIN to GND VIN -0.3 38 V 4
EN to GND EN -0.3 V 4
FB to GND FB -0.3 5.5 V 4
SW to GND SW -0.3 V 4
SW to GND transient SW -3.5 38 V less than 10 ns transient 4
CB to SW CB -0.3 5.5 V 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 173 °C/W DBV (6 pins) 4
Junction-to-case (top) thermal resistance RθJC_T 116 °C/W DBV (6 pins) 4
Junction-to-case (bottom) thermal resistance RθJC_B 31 °C/W DBV (6 pins) 4
Junction-to-top characterization parameter ψJT 20 °C/W DBV (6 pins) 4
Junction-to-board characterization parameter ψJB 30 °C/W DBV (6 pins) 4

CAD (KiCad official)

  • Symbol: TPS560430YFQDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tps560430yfqdbvrq1-etched.step / tps560430yfqdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps560430yfqdbvrq1.step / tps560430yfqdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 7e910f0abd1e81d6, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF