component
74LVC2G74DC-Q100H
Public Made by Adomby adom
Nexperia Flip Flops, VSSOP-8-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74LVC2G74DC-Q100H
Nexperia · Flip Flops · VSSOP-8-0.5mm
74LVC2G74DC-Q100H from Nexperia, in a VSSOP-8-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CP | input | Clock input, edge-triggered on the LOW-to-HIGH transition; data at D that meets set-up and hold times is stored on this edge. |
| 2 | D | input | Data input, sampled on the LOW-to-HIGH clock transition and must meet the set-up and hold time requirements. |
| 3 | Q | output | Complement output of the flip-flop. |
| 4 | GND | power_in | Ground (0 V) reference for all voltages. |
| 5 | Q | output | True output of the flip-flop. |
| 6 | RD | input | Asynchronous reset-direct input, active LOW; with SD HIGH it drives Q LOW and Q̅ HIGH. |
| 7 | SD | input | Asynchronous set-direct input, active LOW; with RD HIGH it drives Q HIGH and Q̅ LOW. |
| 8 | VCC | power_in | Supply voltage; recommended operating range is 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | VSSOP-8-0.5mm |
| Category | Logic |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | 1.65 | 5.5 | V | 4 | ||
| input voltage | VI | 0 | 5.5 | V | 4 | ||
| output voltage | VO | 0 | V | Active mode | 4 | ||
| output voltage | VO | 0 | 5.5 | V | Power-down mode; VCC = 0 V | 4 | |
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 20 | ns/V | VCC = 1.65 V to 2.7 V | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 10 | ns/V | VCC = 2.7 V to 5.5 V | 4 | ||
| supply voltage | VCC | -0.5 | 6.5 | V | 4 | ||
| input clamping current | IIK | -50 | mA | VI < 0 V | 4 | ||
| input voltage | VI | -0.5 | 6.5 | V | 4 | ||
| output clamping current | IOK | -50 | 50 | mA | VO > VCC or VO < 0 V | 4 | |
| output voltage | VO | -0.5 | V | Active mode | 4 | ||
| output voltage | VO | -0.5 | 6.5 | V | Power-down mode; VCC = 0 V | 4 | |
| output current | IO | -50 | 50 | mA | VO = 0 V to VCC | 4 | |
| supply current | ICC | 100 | mA | 4 | |||
| ground current | IGND | -100 | mA | 4 | |||
| total power dissipation | Ptot | 250 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| HIGH-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| HIGH-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| LOW-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| LOW-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| HIGH-level output voltage | VOH | 0.95 | 1.54 | V | IO = -4 mA; VCC = 1.65 V | 5 | |
| HIGH-level output voltage | VOH | 1.7 | 2.15 | V | IO = -8 mA; VCC = 2.3 V | 5 | |
| HIGH-level output voltage | VOH | 1.9 | 2.5 | V | IO = -12 mA; VCC = 2.7 V | 5 | |
| HIGH-level output voltage | VOH | 2 | 2.62 | V | IO = -24 mA; VCC = 3.0 V | 5 | |
| HIGH-level output voltage | VOH | 3.4 | 4.11 | V | IO = -32 mA; VCC = 4.5 V | 5 | |
| LOW-level output voltage | VOL | 0.1 | V | IO = 100 μA; VCC = 1.65 V to 5.5 V | 5 | ||
| LOW-level output voltage | VOL | 0.07 | 0.7 | V | IO = 4 mA; VCC = 1.65 V | 5 | |
| LOW-level output voltage | VOL | 0.12 | 0.45 | V | IO = 8 mA; VCC = 2.3 V | 5 | |
| LOW-level output voltage | VOL | 0.17 | 0.6 | V | IO = 12 mA; VCC = 2.7 V | 5 | |
| LOW-level output voltage | VOL | 0.33 | 0.8 | V | IO = 24 mA; VCC = 3.0 V | 5 | |
| LOW-level output voltage | VOL | 0.39 | 0.8 | V | IO = 32 mA; VCC = 4.5 V | 5 | |
| input leakage current | II | -1 | 1 | μA | VI = 5.5 V or GND; VCC = 0 V to 5.5 V | 5 | |
| power-off leakage current | IOFF | -2 | 2 | μA | VI or VO = 5.5 V; VCC = 0 V | 5 | |
| supply current | ICC | 0.1 | 4 | μA | VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A | 5 | |
| additional supply current | ΔICC | 5 | 500 | μA | per pin; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V | 5 | |
| propagation delay CP to Q, Q | tpd | 1.5 | 6 | 13.4 | ns | CP to Q, Q; see Fig. 5; VCC = 1.65 V to 1.95 V | 6 |
| propagation delay CP to Q, Q | tpd | 1 | 3.5 | 7.1 | ns | CP to Q, Q; see Fig. 5; VCC = 2.3 V to 2.7 V | 6 |
| propagation delay CP to Q, Q | tpd | 1 | 3.5 | 5.9 | ns | CP to Q, Q; see Fig. 5; VCC = 3.0 V to 3.6 V | 6 |
| propagation delay CP to Q, Q | tpd | 1 | 2.5 | 4.1 | ns | CP to Q, Q; see Fig. 5; VCC = 4.5 V to 5.5 V | 6 |
| propagation delay SD to Q, Q | tpd | 1.5 | 6 | 12.9 | ns | SD to Q, Q; see Fig. 6; VCC = 1.65 V to 1.95 V | 6 |
| propagation delay SD to Q, Q | tpd | 1 | 3.5 | 7 | ns | SD to Q, Q; see Fig. 6; VCC = 2.3 V to 2.7 V | 6 |
| propagation delay SD to Q, Q | tpd | 1 | 3 | 5.9 | ns | SD to Q, Q; see Fig. 6; VCC = 3.0 V to 3.6 V | 6 |
| propagation delay SD to Q, Q | tpd | 1 | 2.5 | 4.1 | ns | SD to Q, Q; see Fig. 6; VCC = 4.5 V to 5.5 V | 6 |
| propagation delay RD to Q, Q | tpd | 1.5 | 5 | 12.9 | ns | RD to Q, Q; see Fig. 6; VCC = 1.65 V to 1.95 V | 6 |
| propagation delay RD to Q, Q | tpd | 1 | 3.5 | 7 | ns | RD to Q, Q; see Fig. 6; VCC = 2.3 V to 2.7 V | 6 |
| propagation delay RD to Q, Q | tpd | 1 | 3 | 5.9 | ns | RD to Q, Q; see Fig. 6; VCC = 3.0 V to 3.6 V | 6 |
| propagation delay RD to Q, Q | tpd | 1 | 2.5 | 4.1 | ns | RD to Q, Q; see Fig. 6; VCC = 4.5 V to 5.5 V | 6 |
| set-up time | tsu | 2.9 | ns | D to CP; see Fig. 5; VCC = 1.65 V to 1.95 V | 6 | ||
| set-up time | tsu | 1.7 | ns | D to CP; see Fig. 5; VCC = 2.3 V to 2.7 V | 7 | ||
| set-up time | tsu | 1.3 | 0.5 | ns | D to CP; see Fig. 5; VCC = 3.0 V to 3.6 V | 7 | |
| set-up time | tsu | 1.1 | ns | D to CP; see Fig. 5; VCC = 4.5 V to 5.5 V | 7 | ||
| recovery time | trec | 1 | ns | 6 | |||
| maximum frequency | fmax | 200 | MHz | CP; see Fig. 5; VCC = 4.5 V to 5.5 V | 7 | ||
| hold time | th | 1 | ns | D to CP; see Fig. 5; VCC = 4.5 V to 5.5 V | 7 |
CAD (KiCad official)
- Symbol:
74LVC2G74DC-Q100H - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.5mm (KiCad packages3D, STEP)
- 3D model files:
74lvc2g74dc-q100h-etched.step/74lvc2g74dc-q100h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc2g74dc-q100h.step/74lvc2g74dc-q100h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (15 pp, sha256
a9318f1157a5efaf, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).