component
D6211B
Public Made by Adomby adom
Silicore(芯谷) Power Management - Specialized, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownD6211B
Silicore(芯谷) · Power Management - Specialized · SOT-23-6
D6211B from Silicore(芯谷), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENB/CE | input | Low-active enable input that also serves as the CE pin, where an external capacitor sets the one-shot period (T(one-shot) = 1.3x10^6 x CCE seconds) in one-shot control mode. |
| 2 | GND | power_in | Ground reference pin for the driver. |
| 3 | FBC | input | Forward/backward control input that sets the direction of the H-bridge driver output between OUT1 and OUT2. |
| 4 | OUT1 | output | Driver output 1 of the one-channel bi-directional H-bridge, with a typical current-switch impedance below 3 ohms and a 500 mA maximum output current. |
| 5 | VDD | power_in | Power supply input with a recommended operating range of 2.5 V to 5.5 V (5.0 V typical) and an absolute maximum of 5.5 V. |
| 6 | OUT2 | output | Driver output 2 of the one-channel bi-directional H-bridge, with a typical current-switch impedance below 3 ohms and a 500 mA maximum output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicore(芯谷) |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (recommended operating) | VDD | 2.5 | 5 | 5.5 | V | 2 | |
| Supply Voltage (absolute maximum) | VDD | 5.5 | V | 2 | |||
| Output Current | IOUT | 500 | mA | 2 | |||
| Operating Temperature Range | Topr | -40 | 125 | ℃ | 2 | ||
| Storage Temperature Range | Tstg | -65 | 50 | ℃ | 2 | ||
| Supply Current, standby (version B) | ISTB(B) | 10 | µA | Steady state or standby state, version B | 3 | ||
| Supply Current, transit state | IDD | 0.8 | 1 | 1.2 | mA | Transit State | 3 |
| Input High "H" | VIH | 1.6 | V | 3 | |||
| Input Low "L" | VIL | -0.4 | V | 3 | |||
| Output Voltage (upper+lower) | VOUT1 | 0.42 | V | IOUT = 200 mA | 3 | ||
| Output Voltage (upper+lower) | VOUT2 | 0.73 | V | IOUT = 300 mA | 3 | ||
| Output Voltage (upper+lower) | VOUT3 | 1.03 | V | IOUT = 400 mA | 3 | ||
| Rise Transition Time | TR | 2.5 | 5 | ns | From 0.1VDD to 0.9 VDD | 3 | |
| Fall Transition Time | TF | 3.5 | 7 | ns | From 0.9* VDD to 0.1* VDD | 3 | |
| Propagation Delay Time ENB → OUT1/2 (L to H) | tPLH | 13 | 16 | ns | VDD = 5V, Load=18Ω | 3 | |
| Propagation Delay Time ENB → OUT1/2 (H to L) | tPHL | 36 | 43 | ns | 3 | ||
| Pulse Width of ENB | tPW | 100 | ns | 3 | |||
| Maximum Frequency of ENB | TMAX | 5 | MHz | 3 |
CAD (KiCad official)
- Symbol:
D6211B - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
d6211b-etched.step/d6211b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);d6211b.step/d6211b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicore(芯谷) datasheet (9 pp, sha256
f4e5974c3752bb12, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).