Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PJ9500M28SE

PJSEMI · Linear Voltage Regulators (LDO) · SOT-23-5

PJ9500M28SE from PJSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power input pin supplying the LDO; the input range is 1.8V to 6V, and a 1µF ceramic capacitor is recommended between VIN and GND.
2 GND power_in Ground reference pin for the regulator; the input and output capacitors should be placed as close as possible to the device.
3 EN input Chip enable, active high, with high impedance; the part turns on above VIH (1.2V min) and off below VIL (0.9V max), and the pin is internally pulled to GND through 1 MΩ.
4 NC unconnected No internal connection on this pin (printed as 'NO Connected' in the datasheet).
5 VOUT power_out Regulated output voltage for the PJ9500M28 (2.8V nominal, ±2% accuracy), with a maximum output current of 500mA.

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 1.8 6 V 7
Output Voltage Accuracy ΔVOUT -2 2 % VIN=5V, IOUT=10mA 7
Line Regulation ΔVLINE 1 3 mV VIN=(VOUT+2V)~7V, IOUT=1mA 7
Load Regulation ΔVLOAD 0.1 0.2 mV/mA VOUT=4V, IOUT=1~200mA 7
Short Circuit Current ISHORT 120 150 mA VEN=VIN, VOUT Short to GND 7
EN Input Threshold Logic Low VIL 0.9 V 7
EN Input Threshold Logic High VIH 1.2 V 7
Supply Voltage 1.8 6 V 6
Maximum Output Current 500 mA 6
Operating Ambient Temperature -40 125 °C 6
VIN, VEN to GND Voltage (VIN) VIN -0.3 6 V 6
VIN, VEN to GND Voltage (VEN) VEN -0.3 6 V 6
VOUT to VIN Voltage -0.3 5 V 6
Maximum Load Current 500 mA 6
Power Dissipation 250 mW SOT-23-5 package 6
Operating Ambient Temperature -40 125 °C 6
Storage Temperature Range -40 150 °C 6
Lead Temperature 300 °C 10S 6
ESD Voltage HBM HBM 4 KV HBM 6
ESD Voltage CDM CDM 200 V CDM 6
Thermal Resistance, Junction-to-Ambient 400 °C/W SOT-23-5 package 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: PJ9500M28SE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: pj9500m28se-etched.step / pj9500m28se-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pj9500m28se.step / pj9500m28se.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (16 pp, sha256 d7709c00ce45adff, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF