component
SIT3232EEAE
Public Made by Adomby adom
SIT RS232 ICs, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT3232EEAE
SIT · RS232 ICs · SSOP-16-208mil
SIT3232EEAE from SIT, in a SSOP-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor. |
| 2 | V+ | power_out | Doubled voltage terminal (charge pump output, up to VCC+7 V max). |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor. |
| 6 | V- | power_out | Inverted voltage terminal (charge pump output, down to -7 V max). |
| 7 | T2OUT | output | Second transmitter RS-232 output, rated ±13.2 V. |
| 8 | R2IN | input | Second receiver RS-232 input, range ±25 V with 3 to 7 kΩ input impedance. |
| 9 | R2OUT | output | Second receiver logic output, -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter logic input, low level max 0.8 V and high level min 2 V. |
| 11 | T1IN | input | First transmitter logic input, low level max 0.8 V and high level min 2 V. |
| 12 | R1OUT | output | First receiver logic output, -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First receiver RS-232 input, range ±25 V with 3 to 7 kΩ input impedance. |
| 14 | T1OUT | output | First transmitter RS-232 output, rated ±13.2 V. |
| 15 | GND | power_in | Ground. |
| 16 | VCC | power_in | Supply voltage, 3 V to 5.5 V operating, absolute max -0.3 to +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SIT |
| Package | SSOP-16-208mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current with no Load | Isup | 2 | mA | VCC=3.3V, 25°C, C1-C4=1µF | 3 | ||
| Logic Control Low Level | VTTIN_L | 0.8 | V | T1IN,T2IN | 3 | ||
| Logic Control High Level | VTTIN_H | 2 | V | T1IN,T2IN | 3 | ||
| Input Logic Current | ITIN | -1 | 1 | μA | T1IN,T2IN | 3 | |
| Receiver Output Logic-Low Voltage | VROL | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 3 | ||
| Receiver Input Range | VRIN | -25 | 25 | V | 4 | ||
| Receiver Input Low Threshold (3.3V) | VRIL | 0.6 | 1.1 | V | VCC=3.3V | 4 | |
| Receiver Input Low Threshold (5V) | VRIL | 0.8 | 1.5 | V | VCC=5V | 4 | |
| Receiver Input High Threshold (3.3V) | VRIH | 1.5 | 2.4 | V | VCC=3.3V | 4 | |
| Receiver Input High Threshold (5V) | VRIH | 1.9 | 2.4 | V | VCC=5V | 4 | |
| Receiver Input Hysteresis | 0.4 | V | 4 | ||||
| Receiver Input Impedance | RRIN | 3 | 5 | 7 | kΩ | 4 | |
| Transmitter Output Swing | VTOUT | 4 | 5 | V | All transmitter outputs loaded with 3kΩ to ground (printed ±) | 4 | |
| Transmitter Output Impedance | RTOUT | 300 | Ω | VCC=0V, Transmitter Input=±2V | 4 | ||
| Transmitter Short-Circuit Current | Itsc | 60 | mA | 4 | |||
| ESD HBM | 15 | KV | R1IN,R2IN,T1OUT,T2OUT; HBM (printed ±15) | 5 | |||
| ESD Air Discharge | 15 | KV | R1IN,R2IN,T1OUT,T2OUT (printed ±15) | 5 | |||
| ESD Contact Discharge | 8 | KV | R1IN,R2IN,T1OUT,T2OUT (printed ±8) | 5 | |||
| Rate Speed | 120 | kbps | RL=3kΩ, CL=1000pF | 5 | |||
| Receiver Propagation delay tRPHL | tRPHL | 300 | ns | CL=150pF | 5 | ||
| Receiver Propagation delay tRPLH | tRPLH | 300 | ns | CL=150pF | 5 | ||
| Receiver skew /tRPHL-tRPLH/ | 150 | ns | CL=150pF | 5 | |||
| Transmitter skew /tTPHL-tTPLH/ | 150 | ns | 5 | ||||
| Transmitter Slew Rate | SR | 4 | 30 | V/μs | RL=3kΩ |
5 | |
| Supply voltage | VCC | -0.3 | 6 | V | 2 | ||
| Doubled Voltage Terminal | V+ | 7 | V | printed VCC-0.3~+7 | 2 | ||
| Inverted Voltage Terminal | V- | -7 | 0.3 | V | printed +0.3~-7 | 2 | |
| V+ + /V-/ | 13 | V | 2 | ||||
| Transmitter Input Voltage Range | T1IN,T2IN | -0.3 | 6 | V | 2 | ||
| Receiver Input Voltage Range | R1IN,R2IN | -25 | 25 | V | 2 | ||
| Transmitter Output Voltage Range | T1OUT,T2OUT | -13.2 | 13.2 | V | 2 | ||
| Operating Temperature | -40 | 85 | °C | 2 | |||
| Storage Temperature | -60 | 150 | °C | 2 | |||
| Soldering Temperature | 300 | °C | 2 | ||||
| Supply voltage range | VCC | 3 | 5.5 | V | Features list | 1 |
CAD (KiCad official)
- Symbol:
SIT3232EEAE - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-208mil (KiCad packages3D, STEP)
- 3D model files:
sit3232eeae-etched.step/sit3232eeae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit3232eeae.step/sit3232eeae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SIT datasheet (12 pp, sha256
2714c7267d52ec1d, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).