Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LN1152B182MR-G

NATLINEAR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

LN1152B182MR-G from NATLINEAR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Regulator supply input. Operating range 2.0 V to 7 V (abs max VSS-0.3 to VSS+8 V). Bypass with a ≥1 µF capacitor placed close to the pin.
2 VSS power_in Ground / negative supply return. Route with low parasitic resistance.
3 CE input Chip-enable (active-high on the 'B' option, with internal pull-down). VCEH ≥ 1.6 V enables the regulator; VCEL ≤ 0.5 V disables it and drops standby current below 1 µA. Abs max VSS-0.3 to VIN+0.3 V.
4 NC unconnected No internal connection. Leave floating or tie to a stable net; do not use as a routing via.
5 VOUT power_out Regulated output. Factory-set to 1.8 V (±2%) on the -182 option, sourcing up to 500 mA when VIN ≥ VOUT+1 V. Requires a ≥1 µF (tantalum recommended) output capacitor for stability.

Key specifications

Parameter Value
Manufacturer NATLINEAR
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LN1152B182MR-G
  • LN1152B182ML-G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (ordering code 4 = 2%) VOUT(E) -2 2 % relative to set VOUT(S) = 1.8 V (ordering code 18) 2
Output current IOUT 500 mA VIN≥VOUT(S)+1.0 V 5
Input-output voltage differential Vdrop 0.05 0.1 V IOUT=50 mA 5
Input-output voltage differential Vdrop 0.11 0.15 V IOUT=100 mA 5
Input stability 0.1 0.2 %/V VOUT(S)+0.5 V ≤VIN≤7 V, IOUT=30 mA 5
Load stability 10 20 mV VIN=VOUT(S)+1.0 V, 1.0 mA ≤IOUT ≤100 mA 5
Output voltage temperature coefficient -100 100 ppm/℃ VIN=VOUT(S)+1.0 V, IOUT=10 mA, -40°C ≤Ta≤85°C 5
Input voltage VIN 2 7 V 5
CE minimum high-level voltage VCEH 1.6 V 5
CE minimum low-level voltage VCEL 0.5 V 5
Input voltage (absolute maximum) VIN -0.3 8 V referenced to VSS (printed VSS-0.3 to VSS+8) 4
CE input voltage (absolute maximum) VON/OFF -0.3 V referenced to VSS; upper limit printed as VIN+0.3 4
Output voltage (absolute maximum) VOUT -0.3 V referenced to VSS; upper limit printed as VIN+0.3 4
Permissible power dissipation PD 400 mW SOT23-5L 4
Operating temperature Topr -40 85 °C 4
Storage temperature Tstg -40 125 °C 4
Input capacitor CIN 1 µF per application note 9
Output capacitor COUT 1 µF per application note 9
Thermal resistance, junction to ambient θJA 235 °C/W 4
Thermal resistance, junction to case θJC 120 °C/W 4

CAD (KiCad official)

  • Symbol: LN1152B182MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: ln1152b182mr-g-etched.step / ln1152b182mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ln1152b182mr-g.step / ln1152b182mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NATLINEAR datasheet (10 pp, sha256 7b4de26339c42624, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF