component
MAX810TDBZRG
Public Made by Adomby adom
HANSCHIP semiconductor Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX810TDBZRG
HANSCHIP semiconductor · Supervisor And Reset ICs · SOT-23-3
MAX810TDBZRG from HANSCHIP semiconductor, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground terminal. |
| 2 | RESET | output | Reset output that goes high when VCC is below the detection voltage Vth and low when VCC is above it, with VOL at most 0.3 V at ISINK = 1.2 mA and VOH at least 0.8VCC at ISOURCE = 150 uA. |
| 3 | VCC | power_in | Chip supply input, specified from 1.0 V to 6.0 V with an absolute maximum of 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 (Operating voltage) | VCC | 1 | 6 | V | 3 | ||
| 检测电压 tolerance (Threshold voltage, printed ±2.5%) | Vth | -2.5 | 2.5 | % | 1 | ||
| 静态电流 (Quiescent current) | ICC | 2 | 5 | uA | VCC=5.5V,No Load | 3 | |
| 上电复位时间 (Power-on reset time) | Trp | 85 | 500 | 900 | ms | MAX810 Z/R/S/T, VCC=0 to 3.5V, VRESET = H to L, No Load | 3 |
| 复位输出低电压 (Reset output low voltage) | VOL | 0.3 | V | VCC = Vthmax, ISINK=1.2mA | 3 | ||
| 温度系数 (Temperature coefficient) | ΔVth/(Vth*ΔTa) | -200 | 200 | ppm/℃ | -20℃≤Ta≤60℃ | 3 | |
| 复位输出电压 (Reset output voltage) | VRESET | -0.3 | V | 3 | |||
| 输入电压 (VCC input voltage) | VCC | 6.5 | V | 3 | |||
| 功耗 (Power dissipation, SOT-23) | PD | 200 | mW | 3 | |||
| 工作温度范围 (Operating temperature range) | Tw | -20 | 60 | ℃ | 3 | ||
| 存储温度范围 (Storage temperature range) | Tc | -50 | 125 | ℃ | 3 | ||
| 焊接温度 (Soldering temperature) | Th | 245 | ℃ | 10s | 3 | ||
| 复位上升沿时间 (Reset rising edge time) | Trd | 90 | ns | VCC=Vth to (Vth－100mV) | 3 | ||
| 检测电压 (Threshold voltage, ordering table Vth(E)) | Vth | 3.08 | V | 1 |
CAD (KiCad official)
- Symbol:
MAX810TDBZRG - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
max810tdbzrg-etched.step/max810tdbzrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max810tdbzrg.step/max810tdbzrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (6 pp, sha256
13741abb85210c7c, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).