3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA1692IDGKR
Texas Instruments · Audio Amplifiers · VSSOP-8 (DGK)
OPA1692IDGKR from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output, channel A |
| 2 | -IN A | input | Inverting input, channel A |
| 3 | +IN A | input | Noninverting input, channel A |
| 4 | V- | power_in | Negative (lowest) power supply; maximum voltage difference to V+ is 40V per absolute maximum ratings |
| 5 | +IN B | input | Noninverting input, channel B |
| 6 | -IN B | input | Inverting input, channel B |
| 7 | OUT B | output | Output, channel B |
| 8 | V+ | power_in | Positive (highest) power supply; maximum voltage difference to V- is 40V per absolute maximum ratings |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 (DGK) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -0.8 | 0.25 | 0.8 | mV | VS = ±1.75 V to ±18 V | 5 |
| Input offset voltage (full temperature range) | VOS | -1 | 1 | mV | VS = ±1.75 V to ±18 V | 5 | |
| Offset voltage drift | 0.5 | 5 | µV/°C | VS = ±1.75 V to ±18 V, TA = –40°C to +125°C | 5 | ||
| Power-supply rejection ratio | PSRR | 0.1 | 1.5 | µV/V | VS = ±1.75 V to ±18 V | 5 | |
| Power-supply rejection ratio (full temperature range) | PSRR | 2.25 | µV/V | TA = –40°C to +125°C | 5 | ||
| Input bias current | IB | 300 | 550 | nA | VCM = 0 V | 5 | |
| Input bias current (full temperature range) | IB | 600 | nA | TA = –40°C to +125°C | 5 | ||
| Input offset current | IOS | -15 | 2 | 15 | nA | VCM = 0 V | 5 |
| Input offset current (full temperature range) | IOS | -20 | 20 | nA | TA = –40°C to +125°C | 5 | |
| Common-mode rejection ratio | CMRR | 0.1 | 1 | uV/V | (V–) + 1.5 V ≤ VCM ≤ (V+) – 0.5 V | 5 | |
| Common-mode rejection ratio (full temperature range) | CMRR | 4 | uV/V | TA = –40°C to +125°C | 5 | ||
| Open-loop voltage gain (full temperature range) | AOL | 110 | 140 | dB | TA = –40°C to +125°C | 5 | |
| Open-loop voltage gain | AOL | 120 | 140 | dB | (V–) + 0.2 V ≤ VO ≤ (V+) – 0.2 V, RL = 2 kΩ | 5 | |
| Voltage output | VOUT | -17.8 | 17.8 | V | RL = 2 kΩ | 6 | |
| Short-circuit current | ISC | -50 | 50 | mA | One channel at a time | 6 | |
| Quiescent current (per channel) | IQ | 650 | 750 | µA | IOUT = 0 A | 6 | |
| Quiescent current (per channel, full temperature range) | IQ | 650 | 975 | µA | IOUT = 0 A, TA = –40°C to +125°C | 6 | |
| Supply voltage, single supply | VS | 3.5 | 36 | V | Single supply | 4 | |
| Supply voltage, split supply | VS | 1.75 | 18 | V | Split supply (printed as ±1.75 V to ±18 V) | 4 | |
| Operating temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage | VS = (V+) – (V–) | 40 | V | 4 | |||
| Input current (all pins except power-supply pins) | -10 | 10 | mA | 4 | |||
| Operating free-air temperature | TA | -55 | 125 | °C | 4 | ||
| Junction temperature | TJ | 200 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 162.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 56.9 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 83.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DGK, VSSOP-8) | ψJT | 6.3 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DGK, VSSOP-8) | ψJB | 81.6 | °C/W | 4 |
CAD (Adom-generated)
- Symbol:
OPA1692IDGKR - Footprint:
Adom_Gen:Texas_Instruments_DGK0008A - 3D model: generated to fit the land (STEP)
- 3D model files:
opa1692idgkr-etched.step/opa1692idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1692idgkr.step/opa1692idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
8532f4ce50e5d66c, retrieved 2026-11-21) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), ZHCSH60C p.42, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.41: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).