Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL431IP

Texas Instruments · Voltage Reference · PDIP-8

TL431IP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE bidirectional Shunt current/voltage input; the datasheet specifies a recommended continuous cathode current of 1 mA to 100 mA and a cathode voltage up to Vref to 36 V (absolute maximum 37 V, IKA range -100 mA to 150 mA).
2 NC unconnected No internal connection.
3 NC unconnected No internal connection.
4 NC unconnected No internal connection.
5 NC unconnected No internal connection.
6 ANODE power_in Common pin, normally connected to ground; all voltages are referenced to ANODE, and the cathode is rated to 37 V absolute maximum with respect to it.
7 NC unconnected No internal connection.
8 REF input Threshold input relative to the common anode, regulated to about 2.5 V (Vref); it cannot be left floating and needs at least 4 µA of reference current, with absolute limits of -0.05 mA to 10 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 2440 2495 2550 mV VKA = Vref, IKA = 10mA 7
Deviation of reference input voltage over full temperature range (All other devices) VI(dev) 5 50 mV VKA = Vref, IKA = 10mA 7
Ratio of change in reference voltage to change in cathode voltage (ΔVKA = 10V - Vref) ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA, ΔVKA = 10V - Vref 7
Ratio of change in reference voltage to change in cathode voltage (ΔVKA = 36V - 10V) ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA, ΔVKA = 36V - 10V 7
Reference input current Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 7
Deviation of reference input current over full temperature range II(dev) 0.8 2.5 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 7
Minimum cathode current for regulation Imin 0.4 1 mA VKA = Vref 7
Off-state cathode current Ioff 0.1 1 µA VKA = 36V, Vref = 0 7
Dynamic impedance /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 7
Cathode voltage (absolute maximum) VKA 37 V 5
Continuous cathode current range (absolute maximum) IKA -100 150 mA 5
Reference input current (absolute maximum) II(ref) -0.05 10 mA 5
Operating junction temperature range TJ 150 °C 5
Storage temperature range Tstg -65 150 °C 5
Cathode voltage (recommended) VKA 36 V 5
Continuous cathode current range (recommended) IKA 1 100 mA 5
Operating free-air temperature (TL43xxI) TA -40 85 °C TL43xxI 5
Junction-to-ambient thermal resistance (P package, 8 pins) RθJA 85 °C/W P package (PDIP, 8 pins) 5
Junction-to-case (top) thermal resistance (P package, 8 pins) RθJC(top) 57 °C/W P package (PDIP, 8 pins) 5

CAD (KiCad official)

  • Symbol: TL431IP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: tl431ip-etched.step / tl431ip-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl431ip.step / tl431ip.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (85 pp, sha256 ed2e90697de4e2c5, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF