3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX6250BCSA+T
Maxim Integrated · Voltage References · SOIC-8
MAX6250BCSA+T from Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I.C. | unconnected | Internally connected; the datasheet states do not use this pin. |
| 2 | IN | power_in | Positive power-supply input, specified for 8V to 36V input voltage range. |
| 3 | NR | passive | Optional noise-reduction capacitor connection; add a 1µF capacitor for wideband noise reduction, and leave open if not used. |
| 4 | GND | power_in | Ground reference for the voltage reference. |
| 5 | TRIM | input | External trim input allowing ±1% output adjustment (Figure 1); leave open if not used. |
| 6 | OUT | power_out | Voltage reference output; the MAX6250 is set for 5.000V output, with absolute maximum OUT and TRIM rating of -0.3V to +12V. |
| 7 | I.C. | unconnected | Internally connected; the datasheet states do not use this pin. |
| 8 | I.C. | unconnected | Internally connected; the datasheet states do not use this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 8 | 36 | V | C, E, M | 2 | |
| Output Voltage Temperature Coefficient | TCVOUT | 2.5 | 5 | ppm/°C | MAX6250BC_A, C | 5 | |
| Line Regulation | ΔVOUT/ΔVIN | 10 | 18 | ppm/V | 8V ≤ VIN ≤ 10V, +25°C | 5 | |
| Line Regulation | ΔVOUT/ΔVIN | 30 | ppm/V | 8V ≤ VIN ≤ 10V, C | 5 | ||
| Line Regulation | ΔVOUT/ΔVIN | 7 | ppm/V | 10V ≤ VIN ≤ 36V, C | 5 | ||
| Load Regulation Sourcing | ΔVOUT/ΔIOUT | 1 | 6 | ppm/mA | Sourcing: 0mA ≤ IOUT ≤ 15mA, C | 5 | |
| Load Regulation Sinking | ΔVOUT/ΔIOUT | 1 | 6 | ppm/mA | Sinking: -15mA ≤ IOUT ≤ 0mA, C | 5 | |
| Supply Current | IIN | 2 | 3 | mA | +25µC | 5 | |
| Supply Current | IIN | 3.3 | mA | C, E, M | 5 | ||
| Trim-Adjustment Range | ΔVOUT | -50 | 30 | 50 | mV | Figure 1, C, E, M | 5 |
| Output Noise Voltage 10Hz to 1kHz | en | 2.5 | 5 | µVRMS | 10Hz ≤ f ≤ 1kHz, +25°C | 5 | |
| Input Voltage (absolute maximum) | IN | -0.3 | 40 | V | Voltages referenced to GND | 2 | |
| OUT, TRIM Voltage (absolute maximum) | OUT, TRIM | -0.3 | 12 | V | Voltages referenced to GND | 2 | |
| NR Voltage (absolute maximum) | NR | -0.3 | 6 | V | Voltages referenced to GND | 2 | |
| Operating Temperature Range | TA | 0 | 70 | °C | MAX62_ _ C A | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering, 10s) | 300 | °C | soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 8 PDIP, 8 SOIC | 2 |
CAD (KiCad official)
- Symbol:
MAX6250BCSA+T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max6250bcsa-t-etched.step/max6250bcsa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6250bcsa-t.step/max6250bcsa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (11 pp, sha256
e48e2becce84ff51, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).