component

UAA2016PG

Public Made by Adom

by adom

onsemi AC-DC Controllers And Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)uaa2016pgfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UAA2016PG

onsemi · AC-DC Controllers And Regulators · PDIP-8

UAA2016PG from onsemi, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Vref power_out Internal voltage reference output, typically -5.5 V (range -6.5 V to -4.5 V) referenced to Pin 7, and it can sink a maximum of 1.0 mA.
2 Hys. Adj. input Hysteresis adjust input, where leaving it open gives about 10 mV internal hysteresis and connecting it to VCC gives up to 5°C; its voltage must stay between 0 and Vref.
3 Sensor input Sense input to the comparator from the NTC divider, with a maximum sensor input bias current of 0.1 µA and a voltage limited to 0 to Vref.
4 Temp. Reduc. input Temperature reduction input, where a resistor R1 between this pin and VCC sets the reduction level (350 mV corresponds to 5°C), and its voltage must stay between 0 and Vref.
5 VEE power_in Negative supply pin from the integrated shunt regulator, which provides VEE of -8.6 V with respect to Pin 7 and has a maximum supply current of 15 mA; the pulse amplifier sinks output current into this pin.
6 Output output Triac gate pulse output that sinks current pulses to VEE, with a maximum pulse current of 150 mA (pulse width under 400 µs) and a minimum of 70 mA, with the output-limiting resistor Rout setting amplitude.
7 VCC power_in Positive supply pin and the reference point for all maximum-rating voltages in this device.
8 Sync input AC synchronization input whose resistor Rsync sets the output pulse width, with a maximum synchronization current of 3.0 mA.

Key specifications

Parameter Value
Manufacturer onsemi
Package PDIP-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (Pins 6, 8 not connected), (TA = −20° to +85°C) ICC 0.9 1.5 mA Pins 6, 8 not connected; TA = −20° to +85°C 2
Stabilized Supply Voltage (Pin 5), (ICC = 2.0 mA) VEE -10 -9 -8 V ICC = 2.0 mA 2
Reference Voltage (Pin 1) Vref -6.5 -5.5 -4.5 V 2
Output Pulse Current (TA = −20° to +85°C), (Rout = 60 Ω, VEE = −8.0 V) IO 90 100 130 mA TA = −20° to +85°C; Rout = 60 Ω, VEE = −8.0 V 2
Output Leakage Current (Vout = 0 V) IOL 10 µA Vout = 0 V 2
Output Pulse Width (TA = −20° to +85°C) (Note 1), (Mains = 220 Vrms, Rsync = 220 kΩ) TP 50 100 µs TA = −20° to +85°C (Note 1); Mains = 220 Vrms, Rsync = 220 kΩ 2
Comparator Offset (Note 5) Voff -10 10 mV Note 5 2
Sensor Input Bias Current IIB 0.1 µA 2
Sawtooth Amplitude (Note 6) AS 50 70 90 mV Note 6 2
Temperature Reduction Voltage (Note 3), (Pin 4 Connected to VCC) VTR 280 350 420 mV Pin 4 connected to VCC; Note 3 2
Additional Hysteresis (Note 4), (Pin 2 Connected to VCC) VH 280 350 420 mV Pin 2 connected to VCC; Note 4 2
Failsafe Threshold (TA = −20° to +85°C) (Note 7) VFSth 180 300 mV TA = −20° to +85°C (Note 7) 2
Supply Current (absolute maximum) ICC 15 mA Supply Current (IPin 5) 2
Non-Repetitive Supply Current ICCP 200 mA Pulse Width = 1.0 s 2
AC Synchronization Current Isync 3 mA 2
Vref Current Sink IPin 1 1 mA 2
Output Current (Pin 6) IO 150 mA Pulse Width < 400 µs 2
Power Dissipation PD 625 mW 2
Thermal Resistance, Junction-to-Air RθJA 100 °C/W 2
Operating Temperature Range TA -20 85 °C 2

CAD (KiCad official)

  • Symbol: UAA2016PG
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: uaa2016pg-etched.step / uaa2016pg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); uaa2016pg.step / uaa2016pg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (13 pp, sha256 09d8a1b2090f9115, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF