component
TPS71733DCKT
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS71733DCKT
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
TPS71733DCKT from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input to the device; a 0.1-μF to 1-μF capacitor is recommended for better performance. |
| 2 | GND | power_in | Ground |
| 3 | EN | input | Driving the enable pin above VEN(high) turns on the regulator; driving this pin below VEN(low) puts the regulator into standby mode, thereby disabling the output and reducing operating current. |
| 4 | NR | passive | Fixed voltage versions only; the noise reduction capacitor filters the noise generated by the internal band gap, thus lowering output noise. |
| 5 | OUT | output | The regulated output voltage; a minimum capacitance of 1 μF is required for stability from this pin to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS71733DCKT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps71733dckt-etched.step/tps71733dckt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps71733dckt.step/tps71733dckt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
9d6a9da698418596, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).