component
TL431ACDBVR
Public Made by Adomby adom
Texas Instruments Voltage Reference, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL431ACDBVR
Texas Instruments · Voltage Reference · SOT-23-5
TL431ACDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; pin is not used. |
| 2 | NC | unconnected | Substrate pin attached to die substrate that must be connected to ANODE or left open. |
| 3 | CATHODE | output | Shunt regulator output terminal that regulates voltage between Vref (approximately 2.5V) and 36V with maximum continuous sinking current of 100mA. |
| 4 | REF | input | Reference input terminal that receives feedback from external resistor divider to program output voltage, requiring typical input current of 2-4µA. |
| 5 | ANODE | power_in | Negative supply or ground terminal serving as the common reference point for all voltages in the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum cathode voltage | VKA | 37 | V | Referenced to ANODE, unless otherwise noted | 6 | ||
| Continuous cathode current range | IKA | -100 | 150 | mA | 6 | ||
| Reference input current | II(ref) | -0.05 | 10 | mA | 6 | ||
| Operating virtual junction temperature range | TJ | 150 | °C | 6 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Cathode voltage (recommended) | VKA | 36 | V | Minimum printed as Vref (symbolic, not numeric) | 6 | ||
| Continuous cathode current range (recommended) | IKA | 1 | 100 | mA | 6 | ||
| Operating free-air temperature range (TL43xxC grade, applies to TL431ACDBVR) | TA | 0 | 70 | °C | Natural convection, TL43xxC grade | 6 | |
| Junction-to-ambient thermal resistance (DBV, 5-pin) | RθJA | 206 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DBV, 5-pin) | RθJC(top) | 131 | °C/W | 6 | |||
| Reference voltage | Vref | 2470 | 2495 | 2520 | mV | VKA = Vref, IKA = 10mA | 10 |
| Reference input voltage deviation over full temperature range (all devices except SOT23-3 and TL432) | VI(dev) | 4 | 25 | mV | VKA = Vref, IKA = 10mA | 10 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA; ΔVKA = 10V - Vref | 10 | |
| Ratio of change in reference voltage to change in cathode voltage | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA = 10mA; ΔVKA = 36V - 10V | 10 | |
| Reference input current | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 10 | |
| Reference input current deviation over full temperature range | II(dev) | 0.8 | 1.2 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 10 | |
| Minimum cathode current for regulation | Imin | 0.4 | 0.6 | mA | VKA = Vref | 10 | |
| Off-state cathode current | Ioff | 0.1 | 0.5 | µA | VKA = 36V, Vref = 0 | 10 | |
| Dynamic impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 10 |
CAD (KiCad official)
- Symbol:
TL431ACDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tl431acdbvr-etched.step/tl431acdbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431acdbvr.step/tl431acdbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
313277b9351e61ed, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).