component
TSU101RILT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTSU101RILT
STMicroelectronics · Operational Amplifier · SOT-23-5
TSU101RILT from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Rail-to-rail amplifier output, with output swing within 40 mV of the supply rails at RL = 100 kΩ and 4 mA minimum sink/source at 1.8 V. |
| 2 | VCC- | power_in | Negative supply terminal (ground in single-supply use); supply voltage range is 1.5 V to 5.5 V between VCC+ and VCC-. |
| 3 | IN+ | input | Non-inverting input with rail-to-rail common mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V and 5 pA max bias current at 25 °C. |
| 4 | IN- | input | Inverting input with rail-to-rail common mode range from (VCC-) - 0.1 V to (VCC+) + 0.1 V; input current must be limited to 10 mA. |
| 5 | VCC+ | power_in | Positive supply terminal, 1.5 V to 5.5 V (absolute maximum 6 V); a 10 nF decoupling capacitor close to the pin is advised. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TSU101RILT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tsu101rilt-etched.step/tsu101rilt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsu101rilt.step/tsu101rilt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (33 pp, sha256
07f1bbe8d941a985, retrieved 2026-10-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).