Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74F86N

Texas Instruments · Gates · PDIP-14

SN74F86N from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1A input Input A of exclusive-OR gate 1; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
2 1B input Input B of exclusive-OR gate 1; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
3 1Y output Output Y of exclusive-OR gate 1 (Y = A ⊕ B); IOH is limited to -1 mA and IOL to 20 mA.
4 2A input Input A of exclusive-OR gate 2; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
5 2B input Input B of exclusive-OR gate 2; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
6 2Y output Output Y of exclusive-OR gate 2 (Y = A ⊕ B); IOH is limited to -1 mA and IOL to 20 mA.
7 GND power_in Ground reference for the device.
8 3Y output Output Y of exclusive-OR gate 3 (Y = A ⊕ B); IOH is limited to -1 mA and IOL to 20 mA.
9 3A input Input A of exclusive-OR gate 3; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
10 3B input Input B of exclusive-OR gate 3; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
11 4Y output Output Y of exclusive-OR gate 4 (Y = A ⊕ B); IOH is limited to -1 mA and IOL to 20 mA.
12 4A input Input A of exclusive-OR gate 4; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
13 4B input Input B of exclusive-OR gate 4; device-level VIH minimum is 2 V and VIL maximum is 0.8 V.
14 VCC power_in Supply voltage; recommended range 4.5 V to 5.5 V (5 V nominal), with an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-14
Category Logic ICs
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5 5.5 V SN74F86 2
High-level input voltage VIH 2 V 2
Low-level input voltage VIL 0.8 V 2
High-level output current IOH -1 mA 2
Low-level output current IOL 20 mA 2
Operating free-air temperature TA 0 70 °C SN74F86 2
Supply voltage range VCC -0.5 7 V 2
Input voltage range VI -1.2 7 V see Note 1 2
Input current range II -30 5 mA 2
Voltage applied to any output in the high state -0.5 V up to VCC 2
Current into any output in the low state 40 mA 2
Storage temperature range Tstg -65 150 °C 2
Package thermal impedance, N package θJA 78 °C/W N package, see Note 2 2
High-level output voltage VOH 2.5 3.4 V VCC = 4.5 V, IOH = -1 mA 3
High-level output voltage VOH 2.7 V VCC = 4.75 V, IOH = -1 mA 3
Low-level output voltage VOL 0.3 0.5 V VCC = 4.5 V, IOL = 20 mA 3
Input clamp voltage VIK -1.2 V VCC = 4.5 V, II = -18 mA 3
Input current at maximum input voltage II 0.1 mA VCC = 5.5 V, VI = 7 V 3
High-level input current IIH 20 µA VCC = 5.5 V, VI = 2.7 V 3
Low-level input current IIL -0.6 mA VCC = 5.5 V, VI = 0.5 V 3
Short-circuit output current IOS -60 -150 mA VCC = 5.5 V, VO = 0 3
Supply current, outputs high ICCH 15 23 mA VCC = 5.5 V, See Note 3 3
Supply current, outputs low ICCL 18 28 mA VCC = 5.5 V, VI = 4.5 V 3
Propagation delay tPLH, A or B to Y (other input low) tPLH 3 6.5 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX 3
Propagation delay tPHL, A or B to Y (other input low) tPHL 3 6.5 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX 3
Propagation delay tPLH, A or B to Y (other input high) tPLH 3.5 8 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX 3
Propagation delay tPHL, A or B to Y (other input high) tPHL 3 7.5 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX 3

CAD (KiCad official)

  • Symbol: SN74F86N
  • Footprint: Package_DIP:DIP-14_W7.62mm
  • 3D model: PDIP-14 (KiCad packages3D, STEP)
  • 3D model files: sn74f86n-etched.step / sn74f86n-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74f86n.step / sn74f86n.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (14 pp, sha256 09246b03b04da3fc, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF