3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430F435IPZ
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
MSP430F435IPZ from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC1 | power_in | Digital supply voltage, positive terminal. |
| 2 | P6.3/A3 | bidirectional | General-purpose digital I/O or analog input a3 to the 12-bit ADC. |
| 3 | P6.4/A4 | bidirectional | General-purpose digital I/O or analog input a4 to the 12-bit ADC. |
| 4 | P6.5/A5 | bidirectional | General-purpose digital I/O or analog input a5 to the 12-bit ADC. |
| 5 | P6.6/A6 | bidirectional | General-purpose digital I/O or analog input a6 to the 12-bit ADC. |
| 6 | P6.7/A7/SVSIN | bidirectional | General-purpose digital I/O, analog input a7 to the 12-bit ADC, and analog input to the brownout/supply voltage supervisor. |
| 7 | VREF+ | power_in | Output of the positive terminal of the ADC reference voltage. |
| 8 | XIN | input | Input port for crystal oscillator XT1; standard or watch crystals can be connected. |
| 9 | XOUT | output | Output terminal of crystal oscillator XT1. |
| 10 | VeREF+ | input | Input for an external reference voltage to the ADC. |
| 11 | VREF-/VeREF- | power_in | Negative terminal for the ADC reference voltage, either the internal reference or an external applied reference. |
| 12 | P5.1/S0 | bidirectional | General-purpose digital I/O or LCD segment output 0. |
| 13 | P5.0/S1 | bidirectional | General-purpose digital I/O or LCD segment output 1. |
| 14 | S2 | output | LCD segment output 2. |
| 15 | S3 | output | LCD segment output 3. |
| 16 | S4 | output | LCD segment output 4. |
| 17 | S5 | output | LCD segment output 5. |
| 18 | S6 | output | LCD segment output 6. |
| 19 | S7 | output | LCD segment output 7. |
| 20 | S8 | output | LCD segment output 8. |
| 21 | S9 | output | LCD segment output 9. |
| 22 | S10 | output | LCD segment output 10. |
| 23 | S11 | output | LCD segment output 11. |
| 24 | S12 | output | LCD segment output 12. |
| 25 | S13 | output | LCD segment output 13. |
| 26 | S14 | output | LCD segment output 14. |
| 27 | S15 | output | LCD segment output 15. |
| 28 | S16 | output | LCD segment output 16. |
| 29 | S17 | output | LCD segment output 17. |
| 30 | S18 | output | LCD segment output 18. |
| 31 | S19 | output | LCD segment output 19. |
| 32 | S20 | output | LCD segment output 20. |
| 33 | S21 | output | LCD segment output 21. |
| 34 | S22 | output | LCD segment output 22. |
| 35 | S23 | output | LCD segment output 23. |
| 36 | S24 | output | LCD segment output 24. |
| 37 | S25 | output | LCD segment output 25. |
| 38 | S26 | output | LCD segment output 26. |
| 39 | S27 | output | LCD segment output 27. |
| 40 | S28 | output | LCD segment output 28. |
| 41 | S29 | output | LCD segment output 29. |
| 42 | S30 | output | LCD segment output 30. |
| 43 | S31 | output | LCD segment output 31. |
| 44 | S32 | output | LCD segment output 32. |
| 45 | S33 | output | LCD segment output 33. |
| 46 | P4.7/S34 | bidirectional | General-purpose digital I/O or LCD segment output 34. |
| 47 | P4.6/S35 | bidirectional | General-purpose digital I/O or LCD segment output 35. |
| 48 | P4.5/S36 | bidirectional | General-purpose digital I/O or LCD segment output 36. |
| 49 | P4.4/S37 | bidirectional | General-purpose digital I/O or LCD segment output 37. |
| 50 | P4.3/S38 | bidirectional | General-purpose digital I/O or LCD segment output 38. |
| 51 | P4.2/S39 | bidirectional | General-purpose digital I/O or LCD segment output 39. |
| 52 | COM0 | output | LCD common output COM0 used for LCD backplanes. |
| 53 | P5.2/COM1 | bidirectional | General-purpose digital I/O or LCD common output COM1. |
| 54 | P5.3/COM2 | bidirectional | General-purpose digital I/O or LCD common output COM2. |
| 55 | P5.4/COM3 | bidirectional | General-purpose digital I/O or LCD common output COM3. |
| 56 | R03 | input | Input port of the fourth (lowest) positive analog LCD level (V5). |
| 57 | P5.5/R13 | bidirectional | General-purpose digital I/O or input port of the third most positive analog LCD level (V4 or V3). |
| 58 | P5.6/R23 | bidirectional | General-purpose digital I/O or input port of the second most positive analog LCD level (V2). |
| 59 | P5.7/R33 | bidirectional | General-purpose digital I/O or output port of the most positive analog LCD level (V1). |
| 60 | DVCC2 | power_in | Digital supply voltage, positive terminal. |
| 61 | DVSS2 | power_in | Digital supply voltage, negative terminal. |
| 62 | P4.1 | bidirectional | General-purpose digital I/O. |
| 63 | P4.0 | bidirectional | General-purpose digital I/O. |
| 64 | P3.7 | bidirectional | General-purpose digital I/O. |
| 65 | P3.6 | bidirectional | General-purpose digital I/O. |
| 66 | P3.5 | bidirectional | General-purpose digital I/O. |
| 67 | P3.4 | bidirectional | General-purpose digital I/O. |
| 68 | P3.3/UCLK0 | bidirectional | General-purpose digital I/O, external clock input for USART0 in UART or SPI mode, or clock output for USART0 in SPI mode. |
| 69 | P3.2/SOMI0 | bidirectional | General-purpose digital I/O or slave out/master in of USART0 in SPI mode. |
| 70 | P3.1/SIMO0 | bidirectional | General-purpose digital I/O or slave in/master out of USART0 in SPI mode. |
| 71 | P3.0/STE0 | bidirectional | General-purpose digital I/O or slave transmit enable of USART0 in SPI mode. |
| 72 | P2.7/ADC12CLK | bidirectional | General-purpose digital I/O or 12-bit ADC conversion clock. |
| 73 | P2.6/CAOUT | bidirectional | General-purpose digital I/O or Comparator_A output. |
| 74 | P2.5/URXD0 | bidirectional | General-purpose digital I/O or receive data input for USART0 in UART mode. |
| 75 | P2.4/UTXD0 | bidirectional | General-purpose digital I/O or transmit data output for USART0 in UART mode. |
| 76 | P2.3/TB2 | bidirectional | General-purpose digital I/O or Timer_B3 CCR2 capture input (CCI2A/CCI2B) and compare output (Out2). |
| 77 | P2.2/TB1 | bidirectional | General-purpose digital I/O or Timer_B3 CCR1 capture input (CCI1A/CCI1B) and compare output (Out1). |
| 78 | P2.1/TB0 | bidirectional | General-purpose digital I/O or Timer_B3 CCR0 capture input (CCI0A/CCI0B) and compare output (Out0). |
| 79 | P2.0/TA2 | bidirectional | General-purpose digital I/O or Timer_A capture input CCI2A and compare output Out2. |
| 80 | P1.7/CA1 | bidirectional | General-purpose digital I/O or Comparator_A input. |
| 81 | P1.6/CA0 | bidirectional | General-purpose digital I/O or Comparator_A input. |
| 82 | P1.5/TACLK/ACLK | bidirectional | General-purpose digital I/O, Timer_A clock input TACLK, or ACLK output divided by 1, 2, 4, or 8. |
| 83 | P1.4/TBCLK/SMCLK | bidirectional | General-purpose digital I/O, Timer_B3 input clock TBCLK, or submain system clock SMCLK output. |
| 84 | P1.3/TBOUTH/SVSOUT | bidirectional | General-purpose digital I/O, switches all Timer_B3 PWM outputs to high impedance, or SVS comparator output. |
| 85 | P1.2/TA1 | bidirectional | General-purpose digital I/O or Timer_A capture input CCI1A and compare output Out1. |
| 86 | P1.1/TA0/MCLK | bidirectional | General-purpose digital I/O, Timer_A capture input CCI0B, or MCLK output; TA0 is only an input on this pin, which also serves as BSL receive. |
| 87 | P1.0/TA0 | bidirectional | General-purpose digital I/O, Timer_A capture input CCI0A and compare output Out0, or BSL transmit. |
| 88 | XT2OUT | output | Output terminal of crystal oscillator XT2. |
| 89 | XT2IN | input | Input port for crystal oscillator XT2; only standard crystals can be connected. |
| 90 | TDO/TDI | bidirectional | Test data output port, or programming data input terminal. |
| 91 | TDI/TCLK | input | Test data input or test clock input; the device protection fuse is connected to this pin. |
| 92 | TMS | input | Test mode select, used as an input port for device programming and test. |
| 93 | TCK | input | Test clock, the clock input port for device programming and test. |
| 94 | RST/NMI | input | Reset input or nonmaskable interrupt input port. |
| 95 | P6.0/A0 | bidirectional | General-purpose digital I/O or analog input a0 to the 12-bit ADC. |
| 96 | P6.1/A1 | bidirectional | General-purpose digital I/O or analog input a1 to the 12-bit ADC. |
| 97 | P6.2/A2 | bidirectional | General-purpose digital I/O or analog input a2 to the 12-bit ADC. |
| 98 | AVSS | power_in | Analog supply voltage, negative terminal; supplies SVS, brownout, oscillator, comparator_A, ADC12, port 1, and LCD resistive divider circuitry. |
| 99 | DVSS1 | power_in | Digital supply voltage, negative terminal. |
| 100 | AVCC | power_in | Analog supply voltage, positive terminal; must not power up prior to DVCC1/DVCC2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution (AVCC = DVCC1 = DVCC2 = VCC) | VCC | 1.8 | 3.6 | V | Program execution (see Note 1) | 37 | |
| Supply voltage during program execution, SVS enabled, PORON=1 | VCC | 2 | 3.6 | V | SVS enabled, PORON=1 (see Notes 1, 2) | 37 | |
| Supply voltage during flash memory programming | VCC | 2.7 | 3.6 | V | Flash memory programming (see Note 1) | 37 | |
| Operating free-air temperature range | TA | -40 | 85 | °C | MSP430x43x(1), MSP430x44x(1) | 37 | |
| XT2 crystal frequency | f(XT2) | 1000 | 8000 | kHz | XT2 crystal | 37 | |
| XT2 crystal frequency | f(XT2) | 450 | 8000 | kHz | Ceramic resonator | 37 | |
| LFXT1 crystal frequency | f(LFXT1) | 450 | 8000 | kHz | XT1 selected, XTS_FLL=1, ceramic resonator (see Note 3) | 37 | |
| LFXT1 crystal frequency | f(LFXT1) | 1000 | 8000 | kHz | XT1 selected, XTS_FLL=1, crystal | 37 | |
| Processor frequency (signal MCLK) | f(System) | 0 | 4.15 | MHz | VCC = 1.8 V (minimum printed as DC) | 37 | |
| Processor frequency (signal MCLK) | f(System) | 0 | 8 | MHz | VCC = 3.6 V (minimum printed as DC) | 37 | |
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | 36 | ||
| Voltage applied to any pin | -0.3 | V | Referenced to VSS; maximum printed as VCC + 0.3 V | 36 | |||
| Diode current at any device terminal | -2 | 2 | mA | 36 | |||
| Storage temperature, unprogrammed device | Tstg | -55 | 150 | °C | Unprogrammed device | 36 | |
| Storage temperature, programmed device | Tstg | -55 | 85 | °C | Programmed device | 36 | |
| Active mode supply current | I(AM) | 280 | 350 | µA | f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32768 Hz, XTS_FLL=0, SELM=(0,1); VCC 2.2 V; TA = −40°C to 85°C | 38 | |
| Active mode supply current | I(AM) | 420 | 560 | µA | f(MCLK)=f(SMCLK)=1 MHz, f(ACLK)=32768 Hz, XTS_FLL=0, SELM=(0,1); VCC 3 V; TA = −40°C to 85°C | 38 | |
| Low-power mode (LPM0) supply current | I(LPM0) | 32 | 45 | µA | VCC 2.2 V; TA = −40°C to 85°C | 38 | |
| Low-power mode (LPM0) supply current | I(LPM0) | 55 | 70 | µA | VCC 3 V; TA = −40°C to 85°C | 38 | |
| Low-power mode (LPM2) supply current | I(LPM2) | 11 | 14 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=0; VCC 2.2 V; TA = −40°C to 85°C | 38 | |
| Low-power mode (LPM2) supply current | I(LPM2) | 17 | 22 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=0; VCC 3 V; TA = −40°C to 85°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1 | 1.5 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 2.2 V; TA = −40°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.1 | 1.5 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 2.2 V; TA = 25°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 2 | 3 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 2.2 V; TA = 60°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 3.5 | 6 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 2.2 V; TA = 85°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.8 | 2.2 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 3 V; TA = −40°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 1.6 | 1.9 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 3 V; TA = 25°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 2.5 | 3.5 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 3 V; TA = 60°C | 38 | |
| Low-power mode (LPM3) supply current | I(LPM3) | 4.2 | 7.5 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=32768 Hz, SCG0=1; VCC 3 V; TA = 85°C | 38 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 0.1 | 0.5 | µA | VCC 2.2 V; TA = −40°C | 38 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 0.7 | 1.1 | µA | VCC 2.2 V; TA = 60°C | 38 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 1.7 | 3 | µA | VCC 2.2 V; TA = 85°C | 38 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 0.8 | 1.2 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1; VCC 3 V; TA = 60°C | 38 | |
| Low-power mode (LPM4) supply current | I(LPM4) | 1.9 | 3.5 | µA | f(MCLK)=f(SMCLK)=0 MHz, f(ACLK)=0 Hz, SCG0=1; VCC 3 V; TA = 85°C | 38 | |
| Delay time from LPM3 wake-up | td(LPM3) | 6 | µs | f = 1 MHz; VCC 2.2 V/3 V | 42 | ||
| RAM retention voltage | VRAMh | 1.6 | V | CPU halted (see Note 1) | 42 | ||
| Positive going input threshold voltage, Schmitt-trigger inputs | VIT+ | 1.1 | 1.5 | V | Ports P1-P6; VCC 2.2 V | 39 | |
| Positive going input threshold voltage, Schmitt-trigger inputs | VIT+ | 1.5 | 1.9 | V | Ports P1-P6; VCC 3 V | 39 | |
| Negative going input threshold voltage, Schmitt-trigger inputs | VIT− | 0.4 | 0.9 | V | Ports P1-P6; VCC 2.2 V | 39 | |
| Negative going input threshold voltage, Schmitt-trigger inputs | VIT− | 0.9 | 1.3 | V | Ports P1-P6; VCC 3 V | 39 | |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | 0.3 | 1.1 | V | Ports P1-P6; VCC 2.2 V | 39 | |
| Input voltage hysteresis (VIT+ − VIT−) | Vhys | 0.5 | 1 | V | Ports P1-P6; VCC 3 V | 39 | |
| Leakage current Port P1 | Ilkg(P1.x) | -50 | 50 | nA | Port 1: V(P1.x) | 39 | |
| Leakage current Port P2 | Ilkg(P2.x) | -50 | 50 | nA | Port 2: V(P2.x) | 39 | |
| Leakage current Port P3 | Ilkg(P3.x) | -50 | 50 | nA | Port 3: V(P3.x); VCC 2.2 V/3 V | 39 | |
| Leakage current Port P4 | Ilkg(P4.x) | -50 | 50 | nA | Port 4: V(P4.x); VCC 2.2 V/3 V | 39 | |
| Leakage current Port P5 | Ilkg(P5.x) | -50 | 50 | nA | Port 5: V(P5.x) | 39 | |
| Leakage current Port P6 | Ilkg(P6.x) | -50 | 50 | nA | Port 6: V(P6.x) | 39 | |
| Output frequency Px.y | f(Px.y) | 0 | 5 | MHz | CL = 20 pF, VCC = 2.2 V (minimum printed as DC) | 40 | |
| Output frequency Px.y | f(Px.y) | 0 | 7.5 | MHz | CL = 20 pF, IL = ±1.5 mA, VCC = 3 V (minimum printed as DC) | 40 | |
| Timer_A/Timer_B clock frequency externally applied | f(TAext) | 8 | MHz | TACLK, TBCLK, INCLK: t(H) = t(L); VCC 2.2 V | 39 | ||
| Timer_A/Timer_B clock frequency externally applied | f(TAext) | 10 | MHz | TACLK, TBCLK, INCLK: t(H) = t(L); VCC 3 V | 39 | ||
| Program and Erase supply voltage | VCC(PGM/ERASE) | 2.7 | 3.6 | V | 56 | ||
| Flash Timing Generator frequency | fFTG | 257 | 476 | kHz | 56 | ||
| TCK input frequency | fTCK | 0 | 5 | MHz | VCC 2.2 V (see Note 1) | 56 | |
| TCK input frequency | fTCK | 0 | 10 | MHz | VCC 3 V (see Note 1) | 56 |
CAD (KiCad official)
- Symbol:
MSP430F435IPZ - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
msp430f435ipz-etched.step/msp430f435ipz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f435ipz.step/msp430f435ipz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (89 pp, sha256
ff6c7ef212cfbf3f, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).