component
TPS76701QD
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS76701QD
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
TPS76701QD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground pin for the device. |
| 2 | EN | input | Enable input; applying a TTL high signal shuts down the regulator, and EN must be tied to ground if the shutdown feature is not used, with the voltage at EN limited to -0.3 V to VI + 0.3 V. |
| 3 | IN | power_in | Input voltage pin; recommended input voltage is 2.7 V to 10 V, with an absolute maximum input of 13.5 V. |
| 4 | IN | power_in | Input voltage pin (second pin, connected internally with pin 3); recommended input voltage is 2.7 V to 10 V, with an absolute maximum input of 13.5 V. |
| 5 | OUT | power_out | Regulated output voltage pin; output voltage range is 1.2 V to 5.5 V and peak output current is internally limited to approximately 1.7 A, with output voltage (OUT, FB) absolute maximum of 7 V. |
| 6 | OUT | power_out | Regulated output voltage pin (second pin, connected internally with pin 5); output voltage range is 1.2 V to 5.5 V with output current up to 1.0 A recommended. |
| 7 | FB/NC | input | Feedback input that senses the output voltage for the adjustable device (reference 1.1834 V typ) and must be routed to avoid noise pickup; no connect on fixed-voltage options. |
| 8 | RESET | output | Open-drain reset output that goes low when the output falls to between 92% and 98% of nominal and requires an external pullup resistor, with a maximum RESET voltage of 16.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS76701QD - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps76701qd-etched.step/tps76701qd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps76701qd.step/tps76701qd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
8fecf68765895723, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).