Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM8S103F2P6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

STM8S103F2P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PD4/BEEP/TIM2_CH1/UART1_CK bidirectional High-sink I/O port D4, also serving as BEEP output, Timer 2 channel 1 and UART1 clock.
2 PD5/AIN5/UART1_TX bidirectional High-sink I/O port D5, also serving as analog input 5 and UART1 data transmit.
3 PD6/AIN6/UART1_RX bidirectional High-sink I/O port D6, also serving as analog input 6 and UART1 data receive.
4 NRST bidirectional Reset pin (I/O) with internal reset function; reset state is the default after internal reset release.
5 PA1/OSCIN bidirectional Port A1 also used as resonator/crystal input; in Halt/Active-halt it is automatically set to input weak pull-up and cannot wake the device.
6 PA2/OSCOUT bidirectional Port A2 also used as resonator/crystal output.
7 VSS power_in Digital ground.
8 VCAP passive 1.8 V regulator capacitor connection.
9 VDD power_in Digital power supply; the device operates from 2.95 to 5.5 V.
10 PA3/TIM2_CH3/[SPI_NSS] bidirectional High-sink I/O port A3, also Timer 2 channel 3; SPI master/slave select is available via option-bit remapping AFR1.
11 PB5/I2C_SDA/[TIM1_BKIN] bidirectional True open-drain I/O port B5 used as I2C data; Timer 1 break input is available via remapping AFR4.
12 PB4/I2C_SCL bidirectional True open-drain I/O port B4 used as I2C clock; ADC external trigger is available via remapping AFR4.
13 PC3/TIM1_CH3/[TLI]/[TIM1_CH1N] bidirectional High-sink I/O port C3, also Timer 1 channel 3; top level interrupt (AFR3) and Timer 1 inverted channel 1 (AFR7) are available via remapping.
14 PC4/CLK_CCO/TIM1_CH4/AIN2/[TIM1_CH2N] bidirectional High-sink I/O port C4, also configurable clock output, Timer 1 channel 4 and analog input 2; Timer 1 inverted channel 2 is available via remapping AFR7.
15 PC5/SPI_SCK/[TIM2_CH1] bidirectional High-sink I/O port C5, also SPI clock; Timer 2 channel 1 is available via remapping AFR0.
16 PC6/SPI_MOSI/[TIM1_CH1] bidirectional High-sink I/O port C6, also SPI master out/slave in; Timer 1 channel 1 is available via remapping AFR0.
17 PC7/SPI_MISO/[TIM1_CH2] bidirectional High-sink I/O port C7, also SPI master in/slave out; Timer 1 channel 2 is available via remapping AFR0.
18 PD1/SWIM bidirectional High-sink I/O port D1 used as SWIM data interface; it is in input pull-up during the reset phase and after internal reset release.
19 PD2/AIN3/[TIM2_CH3] bidirectional High-sink I/O port D2, also analog input 3; Timer 2 channel 3 is available via remapping AFR1.
20 PD3/AIN4/TIM2_CH2/ADC_ETR bidirectional High-sink I/O port D3, also analog input 4, Timer 2 channel 2 and ADC external trigger.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDx - VSS -0.3 6.5 V 51
Input voltage on true open drain pins VIN 6.5 V 51
Variations between different power pins /VDDx - VDD/ 50 mV 51
Variations between all the different ground pins /VSSx - VSS/ 50 mV 51
Total current into VDD power lines (source) IVDD 100 mA 51
Total current out of VSS ground lines (sink) IVSS 80 mA 51
Output current sunk by any I/O and control pin IIO 20 mA 51
Output current source by any I/Os and control pin IIO -20 mA 51
Injected current on NRST pin IINJ(PIN) -4 4 mA 52
Total injected current (sum of all I/O and control pins) ΣIINJ -20 20 mA 52
Storage temperature range TSTG -65 150 °C 52
Maximum junction temperature TJ 150 °C 52
Internal CPU clock frequency fCPU 0 16 MHz 52
Standard operating voltage VDD 2.95 5.5 V 52
CEXT: capacitance of external capacitor VCAP 470 3300 nF 52
ESR of external capacitor ESR 0.3 Ω at 1 MHz 52
ESL of external capacitor ESL 15 nH 52
Power dissipation TSSOP20 PD 238 mW at TA = 75 °C for suffix 6 52
Ambient temperature for suffix 6 version TA -40 85 °C 52
Junction temperature range suffix 6 version TJ -40 105 °C 52
Reset release delay tTEMP 1.7 ms VDD rising 54
Power-on reset threshold VIT+ 2.6 2.7 2.85 V 54
Brown-out reset threshold VIT- 2.5 2.65 2.8 V 54
Brown-out reset hysteresis VHYS(BOR) 70 mV 54
Supply current in Run mode, code executed from Flash, HSI RC osc IDD(RUN) 3.7 4.5 mA VDD = 5 V, fCPU = fMASTER = 16 MHz 56
Supply current in Run mode, code executed from Flash, HSE user ext. clock IDD(RUN) 4.3 4.75 mA VDD = 5 V, fCPU = fMASTER = 16 MHz 56
Supply current in Run mode, code executed from Flash, HSI RC osc IDD(RUN) 3.9 4.7 mA VDD = 3.3 V, fCPU = fMASTER = 16 MHz 56
Supply current in wait mode, HSI RC osc IDD(WFI) 0.89 1.1 mA VDD = 5 V, fCPU = fMASTER = 16 MHz 57
HSI oscillator power consumption IDD(HSI) 170 250 µA 67
External high speed oscillator frequency fHSE 1 16 MHz 65
Recommended load capacitance C 20 pF 65
Startup time tSU(HSE) 1 ms VDD is stabilized 65
Frequency fHSI 16 MHz 67
Accuracy of HSI oscillator (factory calibrated) ACCHS -1 1 % VDD = 5 V, TA = 25 °C 67
Accuracy of HSI oscillator (factory calibrated) ACCHS -2 2 % VDD = 5 V, -25°C ≤ TA ≤ 85 °C 67
Accuracy of HSI oscillator (factory calibrated) ACCHS -3 3 % 2.95 V ≤ VDD ≤ 5.5 V, -40°C ≤ TA ≤ 125 °C 67
Frequency fLSI 110 128 150 kHz 68
Operating voltage (all modes, execution/write/erase) VDD 2.95 5.5 V fCPU ≤ 16 MHz 69
Standard programming time (including erase) for byte/word/block tprog 6.6 ms 1 byte/4 byte/64 byte 69
Erase time for 1 block (64 byte) terase 3.33 ms 69
Data retention (program and data memory) after 10k erase/write cycles tRET 20 year at TA = +55 °C 69
Pull-up resistor Rpu 30 55 80 kΩ VDD = 5 V, VIN = VSS 70
Digital input leakage current Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 70
Output low level with 8 pins sunk VOL 2 V IIO = 10 mA, VDD = 5 V 71
Output low level with 4 pins sunk VOL 1 V IIO = 4 mA, VDD = 3.3 V 71
Output high level with 8 pins sourced VOH 2.8 V IIO = 10 mA, VDD = 5 V 71
Output high level with 4 pins sourced VOH 2.1 V IIO = 4 mA, VDD = 3.3 V 71
Output low level with 8 pins sunk (high sink ports) VOL 0.8 V IIO = 10 mA, VDD = 5 V 72
Output high level with 8 pins sourced (high sink ports) VOH 4 V IIO = 10 mA, VDD = 5 V 72
NRST output low level voltage VOL(NRST) 0.5 V IOL = 3 mA 75
NRST pull-up resistor RPU(NRST) 30 55 80 kΩ 75
NRST input filtered pulse tIFP(NRST) 75 ns 75
SPI clock frequency master mode fSCK 0 8 MHz Master mode 77
SPI clock frequency slave mode fSCK 0 7 MHz Slave mode 77
SCL clock low time (standard mode I2C) tw(SCLL) 4.7 µs Standard mode I2C 81
ADC clock frequency fADC 1 4 MHz VDD = 2.95 to 5.5 V 82
ADC clock frequency fADC 1 6 MHz VDD = 4.5 to 5.5 V 82
Thermal resistance junction-ambient TSSOP20 - 4.4mm ΘJA 84 °C/W JEDEC JESD51-2, 4-layer PCB, natural convection 106

CAD (KiCad official)

  • Symbol: STM8S103F2P6
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: stm8s103f2p6-etched.step / stm8s103f2p6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8s103f2p6.step / stm8s103f2p6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (121 pp, sha256 ac23789ac0a2f408, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF