Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2735AIDGKR

Texas Instruments · Precision OpAmps · VSSOP-8

OPA2735AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings to within 50mV of the rails with RL = 10kΩ; the absolute maximum rating allows continuous short-circuit to ground, one amplifier per package.
2 -IN A input Inverting input of amplifier A; input terminals are diode-clamped to the supply rails, and input signals that swing more than 0.5V beyond the rails should be current-limited to 10mA or less.
3 +IN A input Non-inverting input of amplifier A; the common-mode voltage range is (V−) − 0.1V to (V+) − 1.5V.
4 V- power_in Negative power supply; the device operates from 2.7V to 12V total supply (±1.35V to ±6V), with an absolute maximum supply voltage of 13.2V.
5 +IN B input Non-inverting input of amplifier B; the common-mode voltage range is (V−) − 0.1V to (V+) − 1.5V.
6 -IN B input Inverting input of amplifier B; input terminals are diode-clamped to the supply rails, and input signals that swing more than 0.5V beyond the rails should be current-limited to 10mA or less.
7 OUT B output Output of amplifier B, which swings to within 50mV of the rails with RL = 10kΩ; the absolute maximum rating allows continuous short-circuit to ground, one amplifier per package.
8 V+ power_in Positive power supply; the device operates from 2.7V to 12V total supply (±1.35V to ±6V), with an absolute maximum supply voltage of 13.2V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VS 2.7 12 V 3
Specified Temperature Range -40 85 °C 3
Operating Temperature Range (table) -40 150 °C 3
Input Offset Voltage VOS 1 5 µV 3
Offset Voltage vs Temperature dVOS/dT 0.01 0.05 µV/°C 3
Power Supply Rejection Ratio PSRR 0.2 1.8 µV/V VS = 2.7V to 12V, VCM = 0V 3
Input Bias Current IB -200 100 200 pA VCM = VS/2 3
Input Offset Current IOS -300 200 300 pA VCM = VS/2 3
Common-Mode Rejection Ratio CMRR 115 130 dB (V−) − 0.1V < VCM < (V+) − 1.5V 3
Open-Loop Voltage Gain AOL 115 130 dB (V−) + 100mV < VO < (V+) − 100mV 3
Voltage Output Swing from Rail 20 50 mV RL = 10kΩ 3
Short-Circuit Current ISC -20 20 mA 3
Quiescent Current (per amplifier) IQ 0.6 0.75 mA IO = 0 3
Thermal Resistance, junction-to-ambient (MSOP-8) JA 150 °C/W MSOP-8, MSOP-10, SO-8 packages 3
Supply Voltage (absolute maximum) 13.2 V 2
Input Terminal Current -10 10 mA Input terminals, diode-clamped 2
Operating Temperature (absolute maximum) -40 150 °C 2
Storage Temperature -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature 300 °C Soldering, 10s 2
ESD Rating (Human Body Model) 2000 V Human Body Model, OPA735/OPA2734/OPA2735 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: OPA2735AIDGKR
  • Footprint: Package_SO:VSSOP-8_3x3mm_P0.65mm
  • 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa2735aidgkr-etched.step / opa2735aidgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2735aidgkr.step / opa2735aidgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 4f28e5b78b0e04db, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF