3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownRS431BYSF3
Jiangsu RUNIC Tech · Voltage Reference · SOT-23
RS431BYSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Shunt current/voltage input (K). Sinks 0.5 to 100mA and regulates VKA between VREF (~2.5V) and 36V according to the reference feedback. |
| 2 | Ref | input | Reference input (R) - threshold relative to the common Anode. Internally compared against the 2.5V bandgap; driven by an external resistor divider from Cathode to Anode to program the shunt voltage (VOUT = (1 + R1/R2) x VREF). Input current typ 1.5µA. |
| 3 | Anode | passive | Common anode pin (A), normally connected to ground. All device voltages are referenced to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
RS431BYSF3RS431AYSF3RS432AYSF3RS432BYSF3
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Cathode Voltage | VKA | -0.3 | 37 | V | 4 | ||
| Cathode Current Range (Continuous) | IKA | -100 | 155 | mA | 4 | ||
| Reference Input Current Range | IREF | -0.05 | 10 | mA | 4 | ||
| Operating temperature | Topr | -40 | 105 | °C | 4 | ||
| Power Dissipation | PD | 370 | mW | 4 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Electrostatic discharge Human-body model (HBM) | V(ESD) | 2000 | V | 4 | |||
| Charge device model (CDM) | V(ESD) | 200 | V | 4 | |||
| Cathode Voltage | VKA | 36 | V | minimum printed as VREF (symbolic, not numeric) | 4 | ||
| Cathode Current Range (Continuous) | IKA | 0.5 | 100 | mA | 4 | ||
| Operating Ambient Temperature Range | TA | -40 | 105 | °C | 4 | ||
| Reference Input Voltage (1% grade, B) | VREF | 2.475 | 2.5 | 2.525 | V | VKA=VREF, IKA=10mA | 5 |
| Deviation of Reference Input Voltage Over Temperature | ΔVREF | 4.5 | 25 | mV | VKA=VREF, IKA=10mA, Tmin ≤ TA ≤ Tmax | 5 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (ΔVKA=10V~VREF) | ΔVREF/ΔVKA | -1 | -2.7 | mV/V | IKA=10mA, ΔVKA=10V~VREF | 5 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (ΔVKA=36V~10V) | ΔVREF/ΔVKA | -0.5 | -2 | mV/V | IKA=10mA, ΔVKA=36V~10V | 5 | |
| Reference Input Current | IREF | 1.5 | 4 | uA | IKA=10mA, R1=10kΩ, R2=∞ | 5 | |
| Deviation of Reference Input Current Over Full Temperature Range | ΔIREF/ΔTA | 0.2 | 0.4 | uA | IKA=10mA, R1=10kΩ, R2=∞, TA=full Temperature | 5 | |
| Minimum cathode current for regulation | IKA(min) | 0.3 | 0.5 | mA | VKA=VREF | 5 | |
| Off-state cathode Current | IKA(OFF) | 0.05 | 0.5 | uA | VKA=36V, VREF=0V | 5 | |
| Dynamic Impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1 to 100mA, f≤1.0KHz | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 185.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.3 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 54.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 31 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 54.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
RS431BYSF3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
rs431bysf3-etched.step/rs431bysf3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs431bysf3.step/rs431bysf3.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rs431bysf3.step |
59 KB | You want the bare part, or you mark your own boards. |
rs431bysf3-etched.step |
2.0 MB | You want the part with RS431BYSF3 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 493 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (9 pp, sha256
8f8161e218eaee64, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).