component
FCM32F030RCT6
Public Made by Adomby adom
Flashchip Microelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFCM32F030RCT6
Flashchip Microelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
FCM32F030RCT6 from Flashchip Microelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply input for the RTC and backup domain, monitorable via ADC_IN18 after 1/2 internal division, rated 2.1-5.5 V backup operating voltage. |
| 2 | PC13 | bidirectional | Standard 5 V I/O supplied through the power switch, limited to 3 mA sink so output speed must not exceed 2 MHz at 30 pF and it must not source current; additional functions WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT. |
| 3 | PC14 | bidirectional | Standard 5 V I/O supplied through the power switch with the same 3 mA limit and 2 MHz/30 pF output restriction; additional function OSC32_IN. |
| 4 | PC15 | bidirectional | Standard 5 V I/O supplied through the power switch with the same 3 mA limit and 2 MHz/30 pF output restriction; additional function OSC32_OUT. |
| 5 | PF0 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions CRS_SYNC and I2C1_SDA, additional function OSC_IN. |
| 6 | PF1 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate function I2C1_SCL, additional function OSC_OUT. |
| 7 | NRST | bidirectional | Device reset input and internal reset output, active low, with embedded weak pull-up of about 40 kOhm. |
| 8 | PC0 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate function EVENTOUT, additional function ADC_IN10. |
| 9 | PC1 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate function EVENTOUT, additional function ADC_IN11. |
| 10 | PC2 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI2_MISO, I2S2_MCK, EVENTOUT, additional function ADC_IN12. |
| 11 | PC3 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI2_MOSI, I2S2_SD, EVENTOUT, additional function ADC_IN13. |
| 12 | VSSA | power_in | Analog ground; on this package a distinct VSSA pin is provided. |
| 13 | VDDA | power_in | Analog power supply, 1.8-5.5 V, must always be greater than or equal to VDD. |
| 14 | PA0 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions USART2_CTS, TIM2_CH1_ETR, USART4_TX, additional functions RTC_TAMP2, WKUP1, ADC_IN0. |
| 15 | PA1 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions USART2_RTS, TIM2_CH2, TIM15_CH1N, USART4_RX, EVENTOUT, additional function ADC_IN1. |
| 16 | PA2 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions USART2_TX, TIM2_CH3, TIM15_CH1, additional functions ADC_IN2, WKUP4. |
| 17 | PA3 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions USART2_RX, TIM2_CH4, TIM15_CH2, additional function ADC_IN3. |
| 18 | VSS | power_in | Digital ground. |
| 19 | VDD | power_in | Digital power supply, 1.8-5.5 V, supplying I/O and the internal regulator. |
| 20 | PA4 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI1_NSS, I2S1_WS, TIM14_CH1, USART2_CK, additional function ADC_IN4. |
| 21 | PA5 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, additional function ADC_IN5. |
| 22 | PA6 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, EVENTOUT, USART3_CTS, additional function ADC_IN6. |
| 23 | PA7 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, EVENTOUT, additional function ADC_IN7. |
| 24 | PC4 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions EVENTOUT, USART3_TX, additional function ADC_IN14. |
| 25 | PC5 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate function USART3_RX, additional functions ADC_IN15, WKUP5. |
| 26 | PB0 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions TIM3_CH3, TIM1_CH2N, EVENTOUT, USART3_CK, additional function ADC_IN8. |
| 27 | PB1 | bidirectional | 5 V-tolerant I/O directly connected to ADC; alternate functions TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N, additional function ADC_IN9. |
| 28 | PB2 | bidirectional | 5 V-tolerant FT I/O with no alternate function listed for this pin. |
| 29 | PB10 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, CEC, TIM2_CH3. |
| 30 | PB11 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions USART3_RX, TIM2_CH4, EVENTOUT, I2C2_SDA. |
| 31 | VSS | power_in | Digital ground. |
| 32 | VDD | power_in | Digital power supply, 1.8-5.5 V. |
| 33 | PB12 | bidirectional | 5 V-tolerant FT I/O; alternate functions TIM1_BKIN, TIM15_BKIN, SPI2_NSS, I2S2_WS, USART3_CK, EVENTOUT. |
| 34 | PB13 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N. |
| 35 | PB14 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions SPI2_MISO, I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1. |
| 36 | PB15 | bidirectional | 5 V-tolerant FT I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, additional functions WKUP7, RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate function TIM3_CH1. |
| 38 | PC7 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate function TIM3_CH2. |
| 39 | PC8 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate function TIM3_CH3. |
| 40 | PC9 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate function TIM3_CH4. |
| 41 | PA8 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART1_CK, TIM1_CH1, EVENTOUT, MCO, I2S2EXT_SD. |
| 42 | PA9 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART1_TX, TIM1_CH2, TIM15_BKIN, I2C1_SCL, MCO. |
| 43 | PA10 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA. |
| 44 | PA11 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, EVENTOUT, I2C2_SCL. |
| 45 | PA12 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, EVENTOUT, I2C2_SDA. |
| 46 | PA13 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions IR_OUT and SWDIO, which is active after reset with internal pull-up. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDDIO2 | power_in | I/O supply, 1.8-5.5 V, powering PA8-PA15, PC6-PC12 and PD2 I/Os. |
| 49 | PA14 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART2_TX and SWCLK, which is active after reset with internal pull-down. |
| 50 | PA15 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions SPI1_NSS, I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR, EVENTOUT. |
| 51 | PC10 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART3_TX, USART4_TX. |
| 52 | PC11 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART3_RX, USART4_RX. |
| 53 | PC12 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART3_CK, USART4_CK. |
| 54 | PD2 | bidirectional | 5 V-tolerant FT I/O supplied by VDDIO2; alternate functions USART3_RTS, TIM3_ETR. |
| 55 | PB3 | bidirectional | 5 V-tolerant FT I/O; alternate functions SPI1_SCK, I2S1_CK, TIM2_CH2, EVENTOUT. |
| 56 | PB4 | bidirectional | 5 V-tolerant FT I/O; alternate functions SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, EVENTOUT. |
| 57 | PB5 | bidirectional | 5 V-tolerant FT I/O; alternate functions SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2, additional function WKUP6. |
| 58 | PB6 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions I2C1_SCL, USART1_TX, TIM16_CH1N. |
| 59 | PB7 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N. |
| 60 | PF11-BOOT0 | bidirectional | 5 V-tolerant FT I/O used as boot memory selection (BOOT0) at startup. |
| 61 | PB8 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions I2C1_SCL, CEC, TIM16_CH1. |
| 62 | PB9 | bidirectional | 5 V-tolerant FM+ capable I/O; alternate functions SPI2_NSS, I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT. |
| 63 | VSS | power_in | Digital ground. |
| 64 | VDD | power_in | Digital power supply, 1.8-5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Flashchip Microelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
CAD (KiCad official)
- Symbol:
FCM32F030RCT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
fcm32f030rct6-etched.step/fcm32f030rct6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fcm32f030rct6.step/fcm32f030rct6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Flashchip Microelectronics datasheet (53 pp, sha256
869b8cbfcd7f751c, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).