component
NSG2008
Public Made by Adomby adom
WXNSIC Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNSG2008
WXNSIC · Gate Drivers · SOIC-8
NSG2008 from WXNSIC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low-side supply pin, recommended operating range 10 V to 20 V referenced to VSS, with an absolute maximum of -0.3 V to 25 V. |
| 2 | IN | input | High-side logic signal input compatible with 3.3 V, 5 V and 15 V logic, with VIH minimum 2.5 V and VIL maximum 0.8 V (VCC = 10 V to 20 V). |
| 3 | SD | input | Low-side logic signal input (shutdown input per the block diagram), with the same logic threshold limits as IN. |
| 4 | VSS | power_in | Ground reference for all voltage parameters in the datasheet. |
| 5 | LO | output | Low-side gate driver output referenced to VSS, with typical source current of 290 mA and sink current of 600 mA (pulse width up to 10 µs). |
| 6 | VS | power_in | High-side floating ground reference, rated for VB - 25 V to VB + 0.3 V absolute maximum, with recommended operation between -8 V and 200 V (up to 250 V per the recommended range table), and dVS/dt tolerance of ±50 V/ns. |
| 7 | HO | output | High-side gate driver output referenced to VS, with output voltage limited to VS - 0.3 V to VB + 0.3 V. |
| 8 | VB | power_in | High-side floating bootstrap supply, recommended VS + 10 V to VS + 20 V, with an absolute maximum of -0.3 V to 275 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WXNSIC |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-side floating supply voltage (VB), absolute max | VB | -0.3 | 275 | V | Referenced to VSS; TA=25°C (section note) | 5 | |
| Low-side supply voltage (VCC), absolute max | VCC | -0.3 | 25 | V | Referenced to VSS; TA=25°C (section note) | 5 | |
| Allowed transient VS slew rate (dVS/dt) | dVS/dt | 50 | V/ns | 5 | |||
| ESD human body model | ESD | 1.5 | kV | Human body discharge mode | 5 | ||
| ESD machine model | ESD | 500 | V | Machine discharge mode | 5 | ||
| Package power dissipation | PD | 0.625 | W | TA ≤25°C | 5 | ||
| Thermal resistance junction-to-ambient | RthJA | 200 | °C/W | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | TS | -55 | 150 | °C | 5 | ||
| Lead temperature | TL | 300 | °C | 5 | |||
| High-side floating ground voltage (VS), recommended | VS | 250 | V | Note 2: VS must be kept within -8V to 200V for normal operation | 5 | ||
| Low-side supply voltage (VCC), recommended | VCC | 10 | 20 | V | 5 | ||
| Logic input voltage (VIN), recommended | VIN | 0 | V | 5 | |||
| Ambient temperature (TA), recommended | TA | -40 | 125 | °C | 5 | ||
| Turn-on propagation delay | tON | 680 | 870 | ns | VS=0/250V | 6 | |
| Turn-off propagation delay | tOFF | 150 | 220 | ns | VS=0V | 6 | |
| Turn-on rise time | tR | 70 | 170 | ns | 6 | ||
| Turn-off fall time | tF | 30 | 90 | ns | 6 | ||
| Dead time | DT | 400 | 520 | 650 | ns | 6 | |
| Delay matching time (tON, tOFF) | MT | 60 | ns | 6 | |||
| VCC undervoltage positive-going threshold | VCCUV+ | 8 | 8.9 | 9.8 | V | 6 | |
| VCC undervoltage negative-going threshold | VCCUV- | 7.4 | 8.2 | 9 | V | 6 | |
| VBS undervoltage positive-going threshold | VBSUV+ | 8 | 8.9 | 9.8 | V | 6 | |
| VBS undervoltage negative-going threshold | VBSUV- | 7.4 | 8.2 | 9 | V | 6 | |
| High-side floating supply leakage current | ILK | 50 | μA | VB=VS=250V | 6 | ||
| VBS quiescent current | IQBS | 45 | 70 | μA | All inputs in off state | 6 | |
| VCC quiescent current | IQCC | 300 | 520 | μA | All inputs in off state | 6 | |
| Input logic high threshold voltage | VIH | 2.5 | V | VCC=10Vto 20V | 6 | ||
| Input logic low threshold voltage | VIL | 0.8 | V | VCC=10Vto 20V | 6 | ||
| Output high-level voltage drop (VBIAS - VO) | VOH | 0.05 | 0.2 | V | IO=2mA | 6 | |
| Output low-level voltage drop (VO) | VOL | 0.02 | 0.1 | V | 6 | ||
| Logic '1' input bias current | IIN+ | 3 | 10 | μA | VIN =5V | 6 | |
| Logic '0' input bias current | IIN- | 5 | μA | VIN =0V | 6 | ||
| Output source current (IO+) | IO+ | 200 | 290 | mA | VO=0V PW≤10us | 6 | |
| Output sink current (IO-) | IO- | 420 | 600 | mA | VO=15V PW≤10us | 6 |
CAD (KiCad official)
- Symbol:
NSG2008 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
nsg2008-etched.step/nsg2008-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nsg2008.step/nsg2008.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WXNSIC datasheet (10 pp, sha256
97195dcd4cebb875, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).