component
BLE32SN120SH1L
Public Made by Adomby adom
Murata Electronics Ferrite Beads, 1210. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBLE32SN120SH1L
Murata Electronics · Ferrite Beads · 1210
BLE32SN120SH1L from Murata Electronics, in a 1210. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 1210 |
| Category | Filters |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Impedance at 100 MHz (nominal 12 Ω, printed ±5 Ω) | Z | -5 | 12 | 5 | Ω | at 100 MHz; measured per 7.1 with Keysight 4291A and 16192A fixture | 1 |
| Impedance change rate after high temperature exposure | ΔZ/Z | -30 | 30 | % | 1000 h at 125°C; measured after 24 h at room condition | 3 | |
| Impedance change rate after temperature cycling | ΔZ/Z | -30 | 30 | % | 1000 cycles, -55°C to +125°C; measured after 24 h at room condition | 3 | |
| Impedance change rate after biased humidity | ΔZ/Z | -30 | 30 | % | 1000 h at 85°C, 85% RH; max rated voltage and rated current applied | 3 | |
| Impedance change rate after operational life | ΔZ/Z | -30 | 30 | % | 125°C, 1000 h; rated current at test temperature | 3 | |
| Impedance change rate after mechanical shock | ΔZ/Z | -30 | 30 | % | MIL-STD-202 Method 213, condition F: 1500 g's, 0.5 ms, half sine | 3 | |
| Impedance change rate after vibration | ΔZ/Z | -30 | 30 | % | 5 g's for 20 min, 12 cycles each of 3 orientations, 10 Hz to 2000 Hz | 3 | |
| Impedance change rate after resistance to soldering heat | ΔZ/Z | -30 | 30 | % | Solder temperature 260°C±5°C, immersion 10 s; pre-heating 150°C/60 s | 3 | |
| Impedance change rate after ESD | ΔZ/Z | -30 | 30 | % | Per AEC-Q200-002, ESD rank 4 | 3 | |
| Operating temperature range | T_op | -55 | 125 | °C | Chapter 3 rated operating temperature range | 1 | |
| Storage temperature range | T_stg | -55 | 125 | °C | Chapter 3 storage temperature range | 1 | |
| Reflow limit soldering peak temperature | 260 | °C | Limit profile: 260°C/10 s peak; above 230°C 60 s max | 8 |
CAD (KiCad official)
- Symbol:
BLE32SN120SH1L - Footprint:
Inductor_SMD:L_1210_3225Metric - 3D model: 1210 (KiCad packages3D, STEP)
- 3D model files:
ble32sn120sh1l-etched.step/ble32sn120sh1l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ble32sn120sh1l.step/ble32sn120sh1l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (10 pp, sha256
1e67a95a5e604c65, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).