Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS802BSOT236

analogysemi · Battery Management ICs · SOT23-6

IS802BSOT236 from analogysemi, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D1 output Open drain output 1 that connects to one end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA).
2 VCC power_in Supply voltage input (2.5 V to 5.5 V) that connects to the transformer primary center-tap and is buffered with a 1 µF to 10 µF ceramic capacitor.
3 D2 output Open drain output 2 that connects to the other end of the transformer primary side (absolute maximum 14 V, peak switch current 500 mA).
4 GND power_in Device ground, connected to board ground.
5 EN input Turns the device on or off; pulled up to VCC by default and can be left floating or tied to VCC if unused (logic high 1.4 V, logic low 0.4 V thresholds).
6 CLK input External clock input (200 kHz to 2000 kHz), internally pulled down to GND, and the device switches automatically to the internal clock if no valid clock is detected.

Key specifications

Parameter Value
Manufacturer analogysemi
Package SOT23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.3 6 V 4
Output switch voltage VD1, VD2 14 V 4
Peak output switch current ID1P, ID2P 500 mA 4
Continuous power dissipation PTOT 250 mW 4
Junction temperature TJ -40 180 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -5000 5000 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -2000 2000 V Charged-device model, JESD22-C101 4
Supply voltage VCC 2.5 3.3 5.5 V 5
Output switch voltage VD1, VD2 0 11 V VCC = 5V ± 10%, transformer with center-tapped primary 5
Output switch voltage VD1, VD2 0 7.2 V VCC = 3.3V ± 10% 5
D1 and D2 output switch current ID1, ID2 500 mA VCC = 5V ± 10%, VD1, VD2 swing ≥ 3.8V 5
Ambient temperature TA -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 174 °C/W SOT23-6 5
Junction-to-case (top) thermal resistance RθJC(top) 107 °C/W SOT23-6 5
Junction-to-board thermal resistance RθJB 72 °C/W SOT23-6 5
Junction-to-top characterization parameter ψJT 50 °C/W SOT23-6 5
Junction-to-board characterization parameter ψJB 69 °C/W SOT23-6 5
Switch-on resistance RON 0.36 0.6 Ω VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 6
Switch-on resistance RON 0.34 0.52 Ω VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 6
Average supply current ICC 200 265 µA VCC = 3.3V ± 10%, no load 6
Average supply current ICC 375 450 µA VCC = 5V ± 10%, no load 6
Shutdown current ISD 7 12 µA 6
D1, D2 switching frequency fSW 300 370 550 kHz VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 6
D1, D2 switching frequency fSW 300 380 550 kHz VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 6
External clock frequency on CLK pin fEXT 200 2000 kHz 6
VCC UVLO rising threshold VCC_UVLO 2.2 2.55 V 6
VCC UVLO falling threshold VCC_UVLO 2 V 6
Internal frequency dither range FREQ_DITH -4.5 4.5 % MODE = VDD, CLK_RS unconnected 6
Duration after switch from external to internal clock TCLKTIMER 35 µs When External Clock is Invalid 6
Internal frequency dither step FREQ_DITH_STEP 0.6 % MODE = VDD, CLK_RS unconnected 6
Max peak current of internal powerfet during soft-start ISS 200 mA VDD = 3.3V 6
Soft-start time T_SS 1.2 ms MODE = VDD, CLK_RS unconnected 6
EN, CLK logic high threshold VIN(ON) 1.4 V 6
EN, CLK logic low threshold VIN(OFF) 0.4 V 6
Thermal shutdown temperature TSD 165 °C 6
Hysteresis of TSD TSD_HYS 15 °C 6
Thermal shutdown hiccup time T_TSD_HICP 64 ms 6
D1, D2 output rise time tr-D 96 ns VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7
D1, D2 output rise time tr-D 99 ns VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7
D1, D2 output fall time tf-D 126 ns VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7
D1, D2 output fall time tf-D 71.8 ns VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7
Break-before-make time tBBM 165 ns VCC = 3.3V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7
Break-before-make time tBBM 110 ns VCC = 5V ± 10%, RL = 50Ω to VDD, 15pF capacitor to GND 7

CAD (KiCad official)

  • Symbol: IS802BSOT236
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT23-6 (KiCad packages3D, STEP)
  • 3D model files: is802bsot236-etched.step / is802bsot236-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is802bsot236.step / is802bsot236.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: analogysemi datasheet (21 pp, sha256 a2ea1fbe1940456b, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF