Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

VIPER26LN

STMicroelectronics · AC-DC Controllers And Regulators · DIP-7

VIPER26LN from STMicroelectronics, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground and MOSFET source, connecting the source of the internal MOSFET and the controller ground reference.
2 VDD power_in Controller supply with an operating range of 11.5 V to 23.5 V, a 23.5 V minimum VDD clamp, and an external storage capacitor required across VDD and GND.
3 LIM input Drain current limitation pin where an external resistor to GND lowers IDlim (default when left open or RLIM above 80 kΩ) and any capacitor to GND must be below 470 nF.
4 FB input Inverting input of the transconductance error amplifier, internally referenced to 3.3 V (3.2 V to 3.4 V), with an absolute maximum of 4.8 V, and tying it to GND disables the error amplifier.
5 COMP passive Output of the internal error amplifier for loop compensation, with an absolute maximum of 3.5 V, and directly driven by the optocoupler in isolated secondary-side regulation.
7 DRAIN passive Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation.
8 DRAIN passive Internal 800 V avalanche-rugged power MOSFET drain (800 V minimum breakdown) that also supplies the startup charging current to VDD, with the PCB copper under the DRAIN pins used for heat dissipation.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-7
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Breakdown voltage VBVDSS 800 V IDRAIN = 1 mA, VCOMP = VGND, TJ = 25°C 4
OFF state drain current IOFF 60 µA VDRAIN = max. rating, VCOMP = VGND, TJ = 25°C 4
Static drain-source ON-resistance RDS(on) 7 Ω IDRAIN = 0.2 A, TJ = 25°C 4
Static drain-source ON-resistance RDS(on) 14 Ω IDRAIN = 0.2 A, TJ = 125°C 4
Drain-source start voltage VDRAIN_START 90 V IDRAIN = 1 mA; VCOMP = GND; TJ = 25°C 4
Charging current during startup IDDch1 -0.6 -1.8 mA VDRAIN = 100 to 640 V; VDD = 4 V 4
Charging current during autorestart falling edge IDDch2 -7 -13 mA VDRAIN = 100 to 640 V; VDD = 9 V falling edge 5
VDD operating voltage range VDD 11.5 23.5 V 5
VDD clamp voltage VDDclamp 23.5 V IDD = 15 mA 5
VDD startup threshold VDDon 12 13 14 V 5
VDD on internal high voltage current generator threshold VDDCSon 9.5 10.5 11.5 V 5
VDD undervoltage shutdown threshold VDDoff 7 8 9 V 5
Operating supply current, not switching IDD0 0.6 mA FOSC = 0 kHz; VCOMP = GND 5
Operating supply current, switching IDD1 2 mA VDRAIN = 120 V; VSW = 60 kHz 5
Operating supply current with VDD < VDDoff IDDoff 0.35 mA VDD < VDDoff 5
Open loop failure current threshold IDDol 4 mA VDD = VDDclamp; VCOMP = 3.3 V 5
FB reference voltage VREF_FB 3.2 3.3 3.4 V 5
Burst mode threshold VCOMPL 1 1.1 1.2 V TJ = 25°C 5
Drain current limitation IDLIM 0.66 0.7 0.74 A ILIM = -10 µA; VCOMP = 3.3 V; TJ = 25 °C 5
Minimum turn-on time tON_MIN 480 ns 5
Maximum duty cycle DMAX 70 80 % 6
Switching frequency (VIPER26L) FOSC 54 60 66 kHz 6
Modulation depth FD -4 4 kHz FOSC = 60 kHz 6
Thermal shutdown temperature threshold TSD 150 160 °C 6
Drain-to-source (ground) voltage VDRAIN 800 V 3
Pulse drain current IDRAIN 3 A limited by TJ = 150 °C 3
COMP voltage VCOMP -0.3 3.5 V 3
FB voltage VFB -0.3 4.8 V 3
LIM voltage VLIM -0.3 2.4 V 3
Supply voltage VDD -0.3 V 3
Input current IDD -0.3 20 mA 3
Power dissipation (DIP7) PTOT 1 W Tamb < 40 °C (DIP7) 3
Junction temperature operating range TJ -40 150 °C 3
Storage temperature TSTG -55 150 °C 3
Repetitive avalanche energy EAV 5 mJ limited by TJ = 150°C 4
Repetitive avalanche current IAR 1.5 A limited by TJ = 150°C 4
Thermal resistance junction to case (1) RTH-JC 10 °C/W Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) 3
Thermal resistance junction ambient (1) RTH-JA 120 °C/W Dissipated power = 1 W; FR4 single side, minimum copper area (note 1) 3
Thermal resistance junction to case (2) RTH-JC 5 °C/W Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) 3
Thermal resistance junction ambient (2) RTH-JA 95 °C/W Dissipated power = 1 W; FR4 single side, 100 mm² Cu 35 µm (note 2) 3
Pull-up current IFB_PULL UP -1 µA 5
Trans conductance GM 2 mA/V VCOMP = 1.5 V, VFB > VFB REF 5
Low level clamp voltage VLIM_LOW 0.5 V ILIM = -100 µA 5
Upper saturation limit VCOMPH 3 V TJ = 25°C 5
Burst mode hysteresis VCOMPL_HYS 40 mV TJ = 25°C 5
ΔVCOMP/ΔIDRAIN HCOMP 3 V/A 5
Dynamic resistance RCOMP(DYN) 15 kΩ VFB = GND 5
Source / sink current ICOMP 150 µA VFB > 100 mV 5
Max. source current ICOMP 220 µA VCOMP = GND; VFB = GND 5
Soft-start time tSS 8.5 ms 5
Burst mode current limitation IDlim_bm 145 mA VCOMP = VCOMPL 5
Overload time tOVL 50 ms 5
Restart time after fault tRESTART 1 s 6
Modulation frequency FM 230 Hz 6
Thermal shutdown hysteresis THYS 30 °C 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper Note: The copper area for heat dissipation has to be designed under the DRAIN pins. 2

CAD (KiCad official)

  • Symbol: VIPER26LN
  • Footprint: Package_DIP:DIP-8-N6_W7.62mm
  • 3D model: DIP-7 (KiCad packages3D, STEP)
  • 3D model files: viper26ln-etched.step / viper26ln-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); viper26ln.step / viper26ln.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (34 pp, sha256 396324b4060be48c, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF