3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE02Z32VLC4R
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
MKE02Z32VLC4R from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO port D bit 1, high-current drive pin when operated as output, with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI. |
| 2 | PTD0 | bidirectional | GPIO port D bit 0, high-current drive pin when operated as output, with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK. |
| 3 | VDD | power_in | Positive supply input, with the device operating from 2.7 to 5.5 V. |
| 4 | VDDA/VREFH | power_in | Analog supply and ADC high voltage reference, which are internally connected to each other (VREFH and VDDA are internally connected). |
| 5 | VREFL | power_in | ADC low voltage reference pin. |
| 6 | VSSA/VSS | power_in | Analog ground and digital ground, which are internally connected to each other (VSSA and VSS are internally connected). |
| 7 | PTB7 | bidirectional | GPIO port B bit 7, with alternate functions I2C0_SCL and EXTAL (oscillator input). |
| 8 | PTB6 | bidirectional | GPIO port B bit 6, with alternate functions I2C0_SDA and XTAL (oscillator output). |
| 9 | PTB5 | bidirectional | GPIO port B bit 5, high-current drive pin when operated as output, with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT. |
| 10 | PTB4 | bidirectional | GPIO port B bit 4, high-current drive pin when operated as output, with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2. |
| 11 | PTC3 | bidirectional | GPIO port C bit 3, with alternate functions FTM2_CH3 and ADC0_SE11. |
| 12 | PTC2 | bidirectional | GPIO port C bit 2, with alternate functions FTM2_CH2 and ADC0_SE10. |
| 13 | PTC1 | bidirectional | GPIO port C bit 1, with alternate functions FTM2_CH1 and ADC0_SE9. |
| 14 | PTC0 | bidirectional | GPIO port C bit 0, with alternate functions FTM2_CH0 and ADC0_SE8. |
| 15 | PTB3 | bidirectional | GPIO port B bit 3, with alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7. |
| 16 | PTB2 | bidirectional | GPIO port B bit 2, with alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6. |
| 17 | PTB1 | bidirectional | GPIO port B bit 1, with alternate functions KBI0_P5, UART0_TX and ADC0_SE5. |
| 18 | PTB0 | bidirectional | GPIO port B bit 0, with alternate functions KBI0_P4, UART0_RX and ADC0_SE4. |
| 19 | PTA7 | bidirectional | GPIO port A bit 7, with alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3. |
| 20 | PTA6 | bidirectional | GPIO port A bit 6, with alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2. |
| 21 | PTD3 | bidirectional | GPIO port D bit 3, with alternate functions KBI1_P3 and SPI1_PCS0. |
| 22 | PTD2 | bidirectional | GPIO port D bit 2, with alternate functions KBI1_P2 and SPI1_MISO. |
| 23 | PTA3 | bidirectional | GPIO port A bit 3, true open-drain pin when operated as output, with alternate functions KBI0_P3, UART0_TX and I2C0_SCL. |
| 24 | PTA2 | bidirectional | GPIO port A bit 2, true open-drain pin when operated as output, with alternate functions KBI0_P2, UART0_RX and I2C0_SDA. |
| 25 | PTA1 | bidirectional | GPIO port A bit 1, with alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1. |
| 26 | PTA0 | bidirectional | GPIO port A bit 0, with alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0. |
| 27 | PTC7 | bidirectional | GPIO port C bit 7, with alternate function UART1_TX. |
| 28 | PTC6 | bidirectional | GPIO port C bit 6, with alternate function UART1_RX. |
| 29 | PTC5 | bidirectional | GPIO port C bit 5, with alternate functions FTM1_CH1 and RTCO. |
| 30 | PTC4 | bidirectional | GPIO port C bit 4, with alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK. |
| 31 | PTA5 | bidirectional | GPIO port A bit 5, with alternate functions IRQ, FTM0_CLK and RESET. |
| 32 | PTA4 | bidirectional | GPIO port A bit 4, with alternate functions ACMP0_OUT and SWD_DIO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 7 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Output low voltage, standard drive | VOL | 0.8 | V | All I/O pins, standard-drive strength, 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high drive | VOL | 0.8 | V | High current drive pins, high-drive strength, 5 V, Iload = 20 mA | 8 | ||
| Input leakage current per pin | /IIn/ | 0.1 | 1 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | |
| Total leakage combined for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs | RPU | 30 | 50 | kΩ | All digital inputs, when enabled (all I/O pins other than PTA2 and PTA3) | 8 | |
| Pullup resistors PTA2 and PTA3 | RPU | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current single pin limit | IIC | -2 | 2 | mA | Single pin limit VIN < VSS, VIN > VDD | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | Maximum is highest voltage that POR is guaranteed | 9 |
| Falling low-voltage detect threshold high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold high range level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | Level 1 falling, LVWV = 00 | 9 |
| Falling low-voltage warning threshold high range level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | Level 2 falling, LVWV = 01 | 9 |
| Falling low-voltage warning threshold high range level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | Level 3 falling, LVWV = 10 | 9 |
| Falling low-voltage warning threshold high range level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | Level 4 falling, LVWV = 11 | 9 |
| Falling low-voltage detect threshold low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold low range level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | Level 1 falling, LVWV = 00 | 9 |
| Falling low-voltage warning threshold low range level 2 | VLVW2L | 2.72 | 2.8 | 2.88 | V | Level 2 falling, LVWV = 01 | 9 |
| Falling low-voltage warning threshold low range level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | Level 3 falling, LVWV = 10 | 9 |
| Falling low-voltage warning threshold low range level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | Level 4 falling, LVWV = 11 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current | SIDD | 2 | 85 | µA | VDD 5 V, no clocks active except 1 kHz LPO, -40 to 105 °C | 15 | |
| Stop mode supply current | SIDD | 1.9 | 80 | µA | VDD 3 V, no clocks active except 1 kHz LPO, -40 to 105 °C | 15 | |
| Run supply current FEI mode, all modules clocks enabled, run from flash | RIDD | 7.8 | mA | VDD 5 V, 40/20 MHz, -40 to 105 °C | 14 | ||
| Operating voltage 12-bit ADC absolute VDDA | VDDA | 2.7 | 5.5 | V | Absolute | 25 | |
| ADC supply current ADLPC=0 ADLSMP=0 ADCO=1 | IDDA | 582 | 990 | µA | ADLPC = 0, ADLSMP = 0, ADCO = 1 | 26 | |
| ADC asynchronous clock source high speed | fADACK | 2 | 3.3 | 5 | MHz | High speed (ADLPC = 0) | 26 |
| ADC asynchronous clock source low power | fADACK | 1.25 | 2 | 3.3 | MHz | Low power (ADLPC = 1) | 26 |
| Comparator supply current operation mode | IDDA | 10 | 20 | µA | Operation mode | 28 | |
| Analog input offset voltage | VAIO | 40 | mV | 28 | |||
| Analog comparator hysteresis | VH | 15 | 20 | mV | HYST = 0 | 28 | |
| Analog comparator hysteresis | VH | 20 | 30 | mV | HYST = 1 | 28 | |
| System and core clock frequency | fSys | 40 | MHz | 16 | |||
| Bus frequency | fBus | 20 | MHz | 16 | |||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | kHz | 16 | |
| Crystal or resonator frequency low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0 | 21 |
| Crystal or resonator frequency high range | fhi | 4 | 20 | MHz | RANGE = 1 | 21 | |
| Thermal resistance junction to ambient single-layer natural convection | RθJA | 86 | °C/W | 32 LQFP, single-layer (1S), natural convection | 19 | ||
| Thermal resistance junction to ambient four-layer natural convection | RθJA | 57 | °C/W | 32 LQFP, four-layer (2s2p), natural convection | 19 | ||
| Thermal resistance junction to ambient 200 ft/min single-layer | RθJMA | 72 | °C/W | 32 LQFP, single-layer (1S), 200 ft./min. air speed | 19 | ||
| Thermal resistance junction to ambient 200 ft/min four-layer | RθJMA | 51 | °C/W | 32 LQFP, four-layer (2s2p), 200 ft./min. air speed | 19 | ||
| Thermal resistance junction to board | RθJB | 33 | °C/W | 32 LQFP | 19 | ||
| Thermal resistance junction to case | RθJC | 24 | °C/W | 32 LQFP | 19 | ||
| Thermal characterization parameter junction to package top | ΨJT | 6 | °C/W | 32 LQFP, natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE02Z32VLC4R - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
mke02z32vlc4r-etched.step/mke02z32vlc4r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z32vlc4r.step/mke02z32vlc4r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (37 pp, sha256
dd3ab7b95cbae8e4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).