3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC12F1571T-I
Microchip Tech · MICROCHIP · SOIC-8
PIC12F1571T-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the PIC12F1571 operating voltage range is 2.3V to 5.5V (the PIC12LF1571 is 1.8V to 3.6V). |
| 2 | RA5 | bidirectional | General purpose I/O that can also serve as Timer1 clock input (T1CKI), PWM1 output, CWG1A complementary output, and external clock input CLKIN in EC mode. |
| 3 | RA4 | bidirectional | General purpose I/O that can also serve as ADC channel AN3, comparator C1IN1- input, Timer1 gate input (T1G), PWM2 output, CWG1B complementary output, and CLKOUT (FOSC/4) output. |
| 4 | RA3 | input | Input-only general purpose pin with interrupt-on-change and weak pull-up; it also serves as MCLR (master clear with internal pull-up, function selected by configuration) and VPP programming voltage, and the Timer1 gate input T1G when selected via APFCON. |
| 5 | RA2 | bidirectional | General purpose I/O that can also serve as ADC channel AN2, comparator C1OUT output, Timer0 clock input (T0CKI), CWG1 fault input (CWG1FLT), CWG1A complementary output, PWM3 output, and external interrupt INT. |
| 6 | RA1 | bidirectional | General purpose I/O that can also serve as ADC channel AN1, ADC voltage reference input (VREF+), comparator C1IN0- input, PWM1 output, and ICSP programming clock (ICSPCLK) / in-circuit debug clock (ICDCLK). |
| 7 | RA0 | bidirectional | General purpose I/O that can also serve as ADC channel AN0, comparator C1IN+ input, DAC output (DACOUT), CWG1B complementary output, PWM2 output, and ICSP data (ICSPDAT) / in-circuit debug data (ICDDAT). |
| 8 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 259 | |||
| Storage temperature | -65 | 150 | °C | 259 | |||
| Voltage on VDD pin with respect to VSS | VDD | -0.3 | 6.5 | V | PIC12F1571/2 (non-LF) | 259 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 259 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | Printed maximum is (VDD + 0.3V), not a fixed number | 259 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 259 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 259 | |||
| Maximum current sunk by any standard I/O pin | 50 | mA | 259 | ||||
| Maximum current sourced by any standard I/O pin | 50 | mA | 259 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 259 | ||
| Operating supply voltage VDDMIN | VDDMIN | 2.3 | V | PIC12F1571/2, FOSC ≤ 16 MHz | 260 | ||
| Operating supply voltage VDDMIN | VDDMIN | 2.5 | V | PIC12F1571/2, FOSC ≤ 32 MHz | 260 | ||
| Operating supply voltage VDDMAX | VDDMAX | 5.5 | V | PIC12F1571/2 | 260 | ||
| Operating ambient temperature TA_MIN | TA_MIN | -40 | °C | Industrial and extended temperature ranges | 260 | ||
| Operating ambient temperature TA_MAX (industrial) | TA_MAX | 85 | °C | Industrial temperature range (-I grade) | 260 | ||
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 262 | ||
| FVR gain voltage accuracy for ADC | VADFVR | -4 | 4 | % | 1x VFVR, ADFVR = 01, VDD ≥ 2.5V | 262 | |
| FVR gain voltage accuracy for Comparator | VCDAFVR | -4 | 4 | % | 1x VFVR, CDAFVR = 01, VDD ≥ 2.5V | 262 | |
| VDD rise rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly | 262 | ||
| Input low voltage, TTL buffer | VIL | 0.8 | V | With TTL buffer, 4.5V ≤ VDD ≤ 5.5V | 268 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | With TTL buffer, 4.5V ≤ VDD ≤ 5.5V | 268 | ||
| Input leakage current, I/O ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 268 | |
| Input leakage current, MCLR | IIL | -200 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, +85°C | 268 | |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 268 |
| Weak pull-up current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 268 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V | 268 | ||
| Capacitive loading on all I/O pins | CIO | 50 | pF | 268 | |||
| Comparator input offset voltage | VIOFF | -60 | 7.5 | 60 | mV | CxSP = 1, VICM = VDD/2, VDD = 3.0V, TA = +25°C | 281 |
| Comparator response time, rising edge | TRESP | 400 | 800 | ns | CxSP = 1, VDD = 3.0V, TA = +25°C | 281 | |
| Comparator response time, falling edge | TRESP | 200 | 400 | ns | CxSP = 1, VDD = 3.0V, TA = +25°C | 281 | |
| ADC integral error | EIL | -1.7 | 1 | 1.7 | LSb | VREF = 3.0V, VDD = 3.0V, TA = +25°C | 278 |
| ADC differential error | EDL | -1 | 1 | 1 | LSb | No missing codes, VREF = 3.0V, VDD = 3.0V, TA = +25°C | 278 |
| ADC offset error | EOFF | -2.5 | 1 | 2.5 | LSb | VREF = 3.0V, VDD = 3.0V, TA = +25°C | 278 |
| ADC gain error | EGN | -2 | 1 | 2 | LSb | VREF = 3.0V, VDD = 3.0V, TA = +25°C | 278 |
| ADC reference voltage | VREF | 1.8 | V | VREF = (VRPOS, VRNEG); printed maximum is VDD | 278 | ||
| Recommended impedance of analog voltage source | ZAIN | 10 | kΩ | Can go higher if external 0.01 µF capacitor is present on input pin | 278 | ||
| Brown-out Reset voltage, BORV = 0 | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 276 |
| Brown-out Reset voltage, BORV = 1 (PIC12F1571/2) | VBOR | 2.35 | 2.45 | 2.58 | V | BORV = 1 (PIC12F1571/2) | 276 |
| Brown-out Reset hysteresis | VHYST | 0 | 25 | 60 | mV | -40°C ≤ TA ≤ +85°C | 276 |
| Low-Power Brown-out Reset voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 276 |
| Supply current IDD, 1 MHz external clock (ECM), medium power | IDD | 91 | 120 | µA | VDD = 3.0V, FOSC = 1 MHz, External Clock (ECM), Medium Power mode | 264 | |
| Supply current IDD, 31 kHz LFINTOSC | IDD | 15 | 24 | µA | VDD = 3.0V, FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C | 264 | |
| Supply current IDD, 16 MHz HFINTOSC | IDD | 1.1 | 1.3 | mA | VDD = 3.0V, FOSC = 16 MHz, HFINTOSC | 264 | |
| Supply current IDD, 32 MHz HFINTOSC | IDD | 2.1 | 2.5 | mA | VDD = 3.0V, FOSC = 32 MHz, HFINTOSC (PLL required) | 265 | |
| Supply current IDD, 32 kHz external clock (ECL), low-power mode | IDD | 15 | 25 | µA | VDD = 3.0V, FOSC = 32 kHz, External Clock (ECL), Low-Power mode | 265 | |
| Base power-down current IPD, Low-Power Sleep mode | IPD | 0.3 | 3 | µA | VDD = 3.0V, max at +85°C; WDT, BOR and FVR disabled, all peripherals inactive, Low-Power Sleep mode, VREGPM = 1 | 266 | |
| Base power-down current IPD, Normal Power Sleep mode | IPD | 11 | 19 | µA | VDD = 3.0V, max at +85°C; WDT, BOR and FVR disabled, all peripherals inactive, Normal Power Sleep mode, VREGPM = 0 | 266 | |
| WDT current in Sleep | IPD | 0.6 | 1.9 | µA | VDD = 3.0V, max at +85°C; WDT Current | 266 | |
| FVR current in Sleep | IPD | 19 | 30 | µA | VDD = 3.0V, max at +85°C; FVR Current | 266 | |
| BOR current in Sleep | IPD | 7 | 10 | µA | VDD = 3.0V, max at +85°C; BOR Current | 266 | |
| LPBOR current in Sleep | IPD | 0.4 | 2 | µA | VDD = 3.0V, max at +85°C; LPBOR Current | 266 | |
| ADC current in Sleep, no conversion in progress | IPD | 0.3 | 1.4 | µA | VDD = 3.0V, max at +85°C; ADC Current (clock FRC), no conversion in progress | 266 | |
| Comparator current in Sleep, CxSP = 0 | IPD | 14 | 23 | µA | VDD = 3.0V, max at +85°C; Comparator, CxSP = 0 | 267 | |
| Comparator current in Sleep, normal power, CxSP = 1 | IPD | 29 | 51 | µA | VDD = 3.0V, max at +85°C; Comparator, Normal Power, CxSP = 1, VREGPM = 1 (Note 1) | 267 | |
| Thermal resistance junction to ambient, 8-pin SOIC | JA | 149.5 | °C/W | 8-pin SOIC package | 270 | ||
| Thermal resistance junction to case, 8-pin SOIC | JC | 39.9 | °C/W | 8-pin SOIC package | 270 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 270 |
CAD (KiCad official)
- Symbol:
PIC12F1571T-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pic12f1571t-i-etched.step/pic12f1571t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12f1571t-i.step/pic12f1571t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (334 pp, sha256
f9743262f808b7d6, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).