3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM27762DSSR
Texas Instruments · Charge Pumps · WSON-12-EP(2x3)
LM27762DSSR from Texas Instruments, in a WSON-12-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGOOD | output | Power Good flag, open drain; Logic 0 = power good, Logic 1 = power not good, and it should be connected to ground if not used. |
| 2 | FB+ | input | Feedback input that must be connected to an external resistor divider between OUT+ and GND and must not be left unconnected. |
| 3 | VIN | power_in | Positive power supply input, operating from 2.7 V to 5.5 V. |
| 4 | GND | power_in | Ground. |
| 5 | CP | power_out | Negative unregulated output voltage of the inverting charge pump. |
| 6 | OUT- | power_out | Regulated negative output voltage, adjustable from -1.5 V to -5 V. |
| 7 | FB- | input | Feedback input that must be connected to an external resistor divider between OUT- and GND and must not be left unconnected. |
| 8 | EN- | input | Enable input for the charge pump and negative LDO, active high. |
| 9 | C1- | passive | Negative terminal for the flying capacitor C1 of the charge pump. |
| 10 | C1+ | passive | Positive terminal for the flying capacitor C1 of the charge pump. |
| 11 | OUT+ | power_out | Regulated positive output voltage, adjustable from 1.5 V to 5 V. |
| 12 | EN+ | input | Enable input for the positive LDO, active high. |
| 13 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-12-EP(2x3) |
| Category | Power Management (PMIC) |
| Pins | 13 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND or GND to VOUT | 5.8 | V | 4 | ||||
| Continuous output current | 300 | mA | CPOUT, OUT+ and OUT- | 4 | |||
| OUT+, OUT- short-circuit duration to GND | 1 | s | 4 | ||||
| Maximum junction temperature | TJMAX | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Human-body model ESD | V(ESD) | -1000 | 1000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Charged-device model ESD | V(ESD) | -250 | 250 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Operating input voltage | VIN | 2.7 | 5.5 | V | 4 | ||
| Operating output current | IOUT | 0 | 250 | mA | 4 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | over operating free-air temperature range | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | over operating free-air temperature range | 4 | |
| Switching frequency | ƒSW | 1.7 | 2 | 2.3 | MHz | VIN = 3.6 V | 5 |
| Shutdown supply current | ISD | 0.5 | 5 | µA | 5 | ||
| Adjustable output voltage, OUT- | VOUT- | -5 | -1.5 | V | 5.5 V ≥ VIN ≥ 2.7 V | 5 | |
| Feedback pin reference voltage, negative | VFB- | -1.238 | -1.22 | -1.202 | V | 5 | |
| Adjustable output voltage, OUT+ | VOUT+ | 1.5 | 5 | V | 5.5 V ≥ VIN ≥ 2.7 V | 5 | |
| Feedback pin reference voltage, positive | VFB+ | 1.182 | 1.2 | 1.218 | V | 5 | |
| Enable pin input voltage high | VIH | 1.2 | V | 5.5 V ≥ VIN ≥ 2.7 V | 5 | ||
| Enable pin input voltage low | VIL | 0.4 | V | 5.5 V ≥ VIN ≥ 2.7 V | 5 | ||
| Supply current | IQ | 390 | µA | Open circuit, no load, EN+, EN- connected to VIN. | 5 | ||
| Output resistance to CPOUT | RNEG | 2.5 | Ω | VIN = 5.5 V, IL = 100 mA | 5 | ||
| LDO dropout voltage, negative | VLDO- | 30 | mV | IL = 100 mA, VOUT- = −5 V | 5 | ||
| Power supply rejection ratio, OUT- | PSRR | 50 | dB | IL = 100 mA, VOUT- = −1.8 V, 10 kHz | 5 | ||
| Output noise voltage, negative | VN- | 22 | µVRMS | IL = 80 mA, 10 Hz to 100 kHz | 5 | ||
| Load regulation, OUT- | 34 | µV/mA | 0 to 250 mA, VOUT = -1.8 V | 5 | |||
| Line regulation, OUT- | 1.5 | mV/V | 5 V ≥ VIN ≥ 2.7 V, IL = 50 mA | 5 | |||
| LDO dropout voltage, positive | VLDO+ | 45 | mV | IL = 100 mA, VOUT = 5 V | 5 | ||
| Power supply rejection ratio, OUT+ | PSRR | 43 | dB | IL = 100 mA, VOUT+ = 1.8 V, 10 kHz | 5 | ||
| Output noise voltage, positive | VN+ | 22 | µVRMS | IL = 80 mA, 10 Hz to 100 kHz | 5 | ||
| Load regulation, OUT+ | 11 | µV/mA | 0 to 250 mA, VOUT = 1.8 V | 5 | |||
| Line regulation, OUT+ | 1.9 | mV/V | 5 V ≥ VIN ≥ 2.7 V, IL = 50 mA | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 62.2 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 54.7 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 25.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 1.8 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 25.6 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 9.2 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LM27762DSSR - Footprint:
Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 - 3D model: WSON-12-EP(2x3), generated on the KiCad land (body 2 x 3 mm, terminals on the pads, 0.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm27762dssr-etched.step/lm27762dssr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm27762dssr.step/lm27762dssr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
465db259d11b3b2f, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).